2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]


Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Servo HITEC D950 TW
1 x Servo HITEC HS-45 HB, servo box
1 x Gear set HITEC HS-81
1 x Servo Digital HITEC HS-5065 MG
2 x Servo HITEC HS-325 BB
1 x Servo HITEC HS-45 HB
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
2 x Servo HITEC HS-125 MG
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
2 x Servo HITEC D941 TW
1 x Servo HITEC HS-53
3 x Gear set HITEC HS-7950TH
2 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Servo HITEC HS-5585MH
1 x Gear set HITEC HS-56 HB
2 x Gear set HITEC HS-55
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
2 x Servo HITEC D625 MW
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Servo HITEC HS-5085 MG Digi
2 x Servo HITEC HS-225 BB
1 x Servo HITEC HS-5475 HB Digi
2 x Servo HITEC D951 TW
2 x Gear set HITEC HS-311/322/325BB
2 x Gear carbonite set HITEC HS-6965
2 x Gear set HITEC HS-225
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Servo HITEC HS-225 MG
1 x Futaba 25 mm servo arm with ball link
2 x Futaba 46 mm servo arm with ball link
2 x Futaba 30 mm servo arm with M3 ball link
1 x Futaba 38 mm servo arm
1 x 54 mm Futaba servo arm tandem with ball link
1 x Futaba 14/20 mm servo pull-pull double arm with ball link
1 x FUTABA 20 mm servo arm with ball link
1 x XTorque CFK Servohebel 38 HITEC 25T
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Hitec 30 mm servo rounded arm
1 x Ferrita 17x10x6.5 mm
1 x Ferrita con funda
1 x Adapter rotula M3
2 x Futaba 54 mm servo arm with ball link
1 x Futaba 50/60 mm servo pull-pull double arm with ball link
1 x Futaba 52 mm servo arm
1 x Futaba 2x20 mm servo double arm
1 x Hitec 46 mm servo arm with ball link
1 x 17 mm servo arm with ball link DES Graupner
3 x HITEC 17 mm servo arm with ball link HITEC
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Ferrita 14x8x5.5 mm
1 x Hitec 38 mm servo arm
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x SERVO DES 658 BB MG
1 x SAVOX SH 0254 servo
1 x Soporte metal para servos
2 x SERVO DES 806 Pignons
1 x Servo HBS 690BB HV Digital
1 x BALSA triangular 6x6x1000 mm
1 x Servo HITEC HS-645 MG
2 x Beech dowels 3.0 x 1000 mm
1 x Red aluminium servo arm V3-Futaba 3-3,5inch
1 x Red aluminium servo arm V3-Futaba 1,5inch M3
1 x BALSA triangular 8x8x1000 mm
2 x Beech dowels 2.0 x 1000 mm
1 x Rudder 2_Tray 4.5~5 inch
1 x Red aluminium servo arm V1-Futaba 20 mm M2
1 x Servo HITEC HSB-9380TH
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x BALSA trip 5.0x5.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Red aluminium servo arm V2-Futaba 1,5" inch M3
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Servo HITEC HSB-9360TH
1 x Gear set HITEC HS-65 HB
1 x Servo HITEC HS-7245MH
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x BALSA trip 3.0x5.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
2 x Servo HITEC HS-70 MG
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x Rudder 2_Tray 3.5~4 inch
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Servo HS-7980TH digi high voltage ultra torque
2 x Servo Mount M (blue)
2 x Servo HITEC HS-81
1 x Servo HITEC HS-77 BB Low Profile
1 x Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x Servo HITEC HS-785 HB
1 x Gear set HITEC D645 MW
1 x BALSA triangular 15x15x1000 mm
1 x Servo HITEC HS-65 HB
1 x Gold aluminium servo arm V2-JR 1,5" inch M3
1 x Blue aluminium servo arm V2-Hitec 1,5 inch M3
2 x Servo HITEC HSB-9370TH
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x PS-050 TONEGAWA Servo
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Red aluminium servo arm V3-Futaba 1,25inch M3
1 x Servo Mount S (red)
1 x Red aluminium servo arm V2-Futaba 2,0 inch
1 x BALSA trip 2.0x10.0x1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Gold aluminium servo arm V1-JR 1,25" inch M3
1 x Servo HITEC HS-7115 TH
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Rudder 2_Tray 4~4.5 inch
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x Servo HITEC HS-85 BB
1 x BALSA trip 10x10x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
2 x Servo arm with 6 mm hole to FEMA 9800A
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Ball link Aluminio M3 (2 pcs)
1 x ABS angle 4,0x4,0x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Servo HITEC HS-485 HB
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x 46 mm Futaba servo arm tandem with ball link
2 x Vertical mounting servo holder
1 x Antonov AN2 Scale 1/6 - 3m
1 x Ferrita 27x14x7 mm
1 x Futaba 38 mm servo arm with ball link
1 x Horizontal mounting servo holder
1 x Servo HITEC HS-7975 TG
1 x 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x Lense for Spotlights, 20mm
1 x XTorque CFK Servohebel 38
1 x Futaba 25 mm servo arm with M3 ball link
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo holder for retract
1 x Oracover Verde 2 m
1 x Painting GHT Lexan Black 150 ml
1 x Universal Colour Paste deep black 250 g
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Servo HITEC D954 TW
1 x Servo HITEC HS-5087 MH
1 x VPP system propeller for AXI VPP motors (spare)
1 x Carbon plate 350x150x1.0 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Blue aluminium servo arm V3-Hitec 1,5inch M3
1 x SSPS105 Super Hi-Power servo
1 x Screws set for Hitec MG arms servo
1 x Red aluminium servo arm V3-Futaba 1,0inch
1 x Balsa panel 2.5x100x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo
1 x Servo HITEC HS-7955 TG Coreless Digi
1 x Servo HITEC HS-5245 MG Digi
1 x Servo HITEC HS-5625 MG Digi
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Oracover CARBON Metalic 1 m
1 x Turbine KingTech K30G Restart
1 x Turbina KINGTECH K70G4
1 x Turbina X45 H "Light Version"
1 x Burner Plug K30/ K45
1 x Exhaust K45TP
1 x Clamp K30 G3
1 x Turbina X45 H "compact"
1 x FOD Screen K45/60/70/85
1 x Turbina KINGTECH K55G4
16,785.33EUR
Manufacturers
Manufacturer Info
Xicoy Turbine
Other products
Languages
Español English
Currencies