Inicio » Catálogo » Motores y Turbinas » Turbinas » Queroseno » Turbinas XICOY » XIX95C

2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]

Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
  Turbinas->
    Queroseno->
      Accesorios
      Aceite
      Humo
      Recambio JETCENTRAL
      Turbinas Jet Central
      Turbinas Jetsmunt
      Turbinas KingTech
      Turbinas PBS
      Turbinas XICOY
    Eléctrica->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Camara USB micro endoscopica
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Cierre de plástico para cabinas
2 x	Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x	Brazo direccional 16 mm Ø 3 mm ( 2 uds)
2 x	Abrazadera 3.2x142 (20 uds)
1 x	Cable acero trenzado Ø 0,5 mm (10 m)
1 x	Abrazadera 2.5x100 (20 uds)
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Cable acero trenzado Ø 0,5 mm (20 m)
2 x	Cierre cabina
1 x	Anclaje cabina en L "tipo F3A" (2 pcs)
1 x	Cierre cabina 33/23.5mm (2 uds)
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Cierre cubiertas o carenados
2 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x	Brazo direccional 12 mm Ø 4 mm
2 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Cable acero trenzado Ø 0,52 mm - 15 kp (10 m)
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
2 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Cinta Roving carbono 20m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
2 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
2 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
2 x	Gafas Aspen
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
1 x	Camara 800 TVL CMOS para FPV
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Conector ABS "L" 1.5 mm x 1000 mm
2 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Perfil Acero Inox. 12.3x7.7x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
2 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
2 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Destornillador Torx® TX8
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Oracover Negro 10 m
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x	Pasacable de goma Ø 5 mm (4 uds)
1 x	Prisionero allen M3x3
1 x	Prisionero 3.5 mm Ø (4 uds)
2 x	Soporte FUEL DOT V3
2 x	Soporte conector MPX empotrado (6 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
3 x	Brazo direccional 16 mm Ø 3 mm
1 x	Varilla mando roscada M2,0 (2 uds) 250 mm
1 x	Varilla mando doble roscada aluminio M3 90 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
1 x	Transmision funda/varilla greyline plastica 3/2 porta kwik link
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Tarjeta SD HC 8 GB
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Fibra de vidrio 25 g/m² 5000x1270 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	Fibra carbono tela 240g/m2 100 cm x 5 m
1 x	Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 50m
1 x	Fibra de vidrio 280 g/m² (silane, tela cruzada) 100 cm x 20 m
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Fibra vidrio 160 g/m2 "twill weave" (20 m x 1 m)
1 x	Fibra de vidrio 49 g/m² (1,10 x 1m)
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Fibra carbono tela 160g/m2 100 cm x 10 m
1 x	Base para servo
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Gafas Flitemaster
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra 18 mm reforzada
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra pin 34x16 mm (10 uds)
1 x	Varilla mando doble roscada aluminio M3 70 mm (2 pcs) knurled
1 x	Varilla mando doble roscada aluminio M2,5 70 mm (2 pcs)
2 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Turbina X132 H "Compact Version"
1 x	Pasador 1x8 mm (10 uds)
1 x	Bomba Humo Variable
1 x	Colador protector turbina 73 x 32 mm
1 x	Pipa Jet ASPIRE 2m
1 x	Soporte frontal tren de aterrizaje 29x26x13,5
1 x	Pasacable de goma Ø 3.2 mm (4 uds)
1 x	Pin corto M2 (10 uds)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Mando control rueda delantera (MINI)
1 x	Soporte conector XT-60 (2 pcs)
1 x	Pin M1 (10 uds)

8,843.18EUR