1 x | 11 mm Rubber pads (14 pcs) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
3 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Clip fixing for wing (2 pcs) |
1 x | Canopy Latch |
1 x | Cabin latch Fox MDM1 4m (pair) |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Cockpit aluminium closing |
1 x | Allen wheel collar M3x3 |
2 x | 80 mm rods set for direction control |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | 100 mm rods set for direction control |
1 x | Allen wheel collar M4x6 |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Small pinned hinge (12 uds) |
2 x | 15 mm reinforced hinge |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
4 x | 25 mm reinforced hinge |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Miniature brass strap hinge, 1 m |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Large flex hinge (12 uds) |
2 x | Long pinned hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Optotronix Aurora Plug |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Conector Servo female 4 pines |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Conector BEC male (10 pcs) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | SIMtransmitter 6 Mode 2 |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Propeller balancer |
3 x | Field folding model stand |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Vacuum pump P1-N |
1 x | Ferrita 27x14x7 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | FESTO connector M5 Quick 6 mm |
2 x | Gates hinge aluminium (1 pcs) |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Electromotor starter EME 35cc |
1 x | 100 mm rods + T patellas set for direction control |
1 x | PowerBox iGyro SAT |
1 x | BlueCom™ Adapter (iOS) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | PowerBox iGyro 1e |
1 x | PowerBox Competition |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | GPS Sensor + Logger OPTronics |
1 x | USB Adaptor OPTronics |
4 x | |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | EasyFLY Addon |
1 x | Nut M2 |
2 x | Blade holder upper |
1 x | Interface Realflight Simulator |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
2 x | 140 mm rods + T patellas set for direction control |
1 x | 45 mm rods set for direction control |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Protector Connector MPX (1 pair) |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | MPX housing with flange (4 pcs) |
1 x | MPX Support (2 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | XT-90 connector (pair) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Pilot Lotsenboot |
1 x | Fishing boat Jule Fischkutter |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Catalog AERO-NAUT 2016 |
2 x | Medidor ángulos y/o incidencias |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | Cable with accesories |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Horn 6/20 with M3 Bearing |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | DIVA cabin cruiser |
1 x | WingFix ULTRA Black Edition |
2 x | Field folding model stand SebArt |
1 x | Propeller balancer |
1 x | Surface Indicator Gauge Small |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
2 x | Screws flush mount M2 |
3 x | Head upper part |
1 x | Blade Holder Full (3 blades) |
1 x | Tail tube RAINBOW |
2 x | Rotor Mast |
2 x | Battery plate |
2 x | Fiberglass motor-holder for electric motors |
2 x | BU 131 Jugmann ARC |
1 x | Gearbox for VM motors (2,5:1) |
2 x | 20,5x14,5 Falcon electric V2 (40 g) |
3 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
2 x | LS-8 GFK 6m Glider |
2 x | BU 131 Jugmann Panel Instrum. trasero |
3 x | Ø 28 mm fiberglass motor-holder for electric motors |
2 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | LO 100 ARC 3.3m |
2 x | Fiberglass motor-holder for electric motors |
1 x | PARTENAVIA 2020 mm ARF with Flaps |
2 x | Glow filter |
2 x | PARTENAVIA 2020 mm ARC with Flaps |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Gearbox for VM motors (3:1) |
1 x | 20x15 Falcon electric V2 |
1 x | Pitts Muffler kit for CAP 21 |
1 x | MASTER 16x10 tree blades propeller |
1 x | Brake disc Electron Retracts |
1 x | 300 Newtons FEMA absorber |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | 400 Newtons FEMA absorber |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Distanzstück motor OS 120 AX |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Propadapter for motor A50 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | 6x4 tree blades propeller |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | 100 Newtons FEMA absorber |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller MENZ-S 16x8 |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Propeller MENZ-S 18x12 |
1 x | Propeller MENZ-S 16x12 |
2 x | Blade holder center GFK 0,5 mm |
1 x | Electromagnets brake |
1 x | Nut M1,6 |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller RF CFK 14.5x14 |
1 x | Piston ring for DA-60 and DA-120 |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | O-ring Saito FG-73 5cyl |
1 x | CILINDER FOR DLE 55RA |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Ignition for DA-50-R, DA-60, DA-85 |
1 x | Carburetor DLE 170M |
1 x | Hifht speed needle DA-50R/100I |
1 x | Motor Saito FG-100 TS, 100 cc |
1 x | Reed valve for DA 50-R |
1 x | Muffler DLE 20 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | 18 mm reinforced hinge |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Servo HITEC HS-125 MG |
1 x | Propeller MENZ-S 21x8 |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Bearing 3x6x2,5 |
1 x | Bearing housing |
1 x | Screw M3x16 |
1 x | Head core bushing |
1 x | Steering lever |
1 x | Baering 3x8x4 |
1 x | Washer 2.2×4 |
1 x | Blade holder center |
1 x | Blade holder lower |
1 x | Screws M1,6x6 Allen |
1 x | Side rudder |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
1 x | Propeller APC 12x6 Electric |
1 x | Propeller CFK 15x15 |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Propeller RF CFK 10x17 |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller 12x6 Falcon electric |
1 x | Piston ring for DLE-55/111/222 |
1 x | Muffler DLE 20-RA |
1 x | Motor Saito FG-14, 13,47 cc |
1 x | Hub DLE 30 |
1 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
1 x | Low speed needle DA-50R/100I |
1 x | Muffler DLE-120 Right |
1 x | Rear crankcase DA-50R |
1 x | Front axi for DA85/DA100/DA100L/DA120 |
1 x | Canister combo DLE 170 cc |
1 x | Crankshaft DA-120 |
1 x | Cilinder DLE 30 - DLE 60 |
1 x | Stainless steel silencer for DA 150/150L |
1 x | DLE 30 complete electronic ignition |
1 x | DLE 55 Ignition unit |
1 x | L ELBOW DA-120 long (2 pcs) |
1 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
1 x | Reed valve for DA-60/70 |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC D85 MG |
1 x | Tap FESTO 6-6 mm |
1 x | Propeller MENZ-S 20x10 |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Motor wall |
1 x | Head core |
1 x | Servo Fork |
1 x | Raer wall |
1 x | Nut M2 securing |
1 x | Head lower part |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Head runner |
1 x | Tail support (2 pcs) |
1 x | Tail boom |
1 x | SERVO HOLDER |
1 x | Rudder |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 12x10 Glow/Gas |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 11x5.5 Electric |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
1 x | Propeller CFK 16x13 |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 18x9 |
1 x | Propeller RF CFK 13x7 |
1 x | Propeller CFK 11x8 |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Escape DLE-60 Dcha |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | DLE 85 Ignition unit |
1 x | Steel conrod DA-50R and DA-60 |
1 x | Pick up DA50/100/150 |
1 x | Motor Saito FG-60 R3, 60 cc |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Piston ring for DA-85 and DA-170 |
1 x | L ELBOW DA-120 normal(2 pcs) |
1 x | Carb Carrier, red DA-150L/170 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Reed valve cage with petals for DA 100/150 |
1 x | L ELBOW 90º ø 25 mm |
1 x | Reed valve carrier for DA-85, DA-100L and DA-120 |
1 x | Piston ring for DLE-30 |
1 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
1 x | Carburetor for DA150L/170 |
1 x | Muffler DLE-120 Left |
1 x | Hub propeller DLE 111 V3/120 |
1 x | Reed valve carrier, without reed valves DA-150L/170 |
1 x | Escape DLE-60 Izda |
1 x | Piston ring for DA-150 |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Motor SAITO FG-61 TS |
1 x | Canister combo DLE 120 cc |
1 x | Propeller APC 24x12 Electric |
1 x | O-Ring SAITO FG-90 R3 |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Piston pin for DA-60 DA-120 |
1 x | Woodruff key for DA50/85/100/150 and DA 200 |
1 x | O-Ring SAITO FG-60 R3 |
1 x | Cylinder for DA-85/170 (1 piece) |
1 x | DLE Ignition 170M |
1 x | |
1 x | Prop washer for DA-85, DA-100, DA-100L, DA-120 |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | DLE Ignition 111/120/170 |
1 x | Motor Saito FG-73 R5, 72.7 cc |
1 x | Piston pin for DA50R/DA100 |
1 x | Gasket set DLE-120 |
1 x | DLE 111 Carb gasket (V1) |
1 x | Carburetor DLE 30 |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Gear set HITEC HS-81 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Propeller MENZ-S 16x6 |
1 x | Gear set HITEC HS-225 |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | Propeller MENZ-S 21x10 |
|
32,983.30EUR |