1 x | PIX Hawk with accesories |
1 x | PPM Encoder Module |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Long pinned hinge (12 uds) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
4 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Gates hinge |
1 x | 25 mm reinforced hinge |
1 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
4 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | 18 mm reinforced hinge |
3 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | Large flex hinge (12 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
2 x | Circlik for shaft 2.3 mm (10 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Small pinned hinge (12 uds) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Flat washer 2.2 mm (20 pcs) |
3 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Horn 5/20 with M2 Bearing |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
4 x | Horn with ball 55x40 |
1 x | Horn 6/35 with M3 Bearing |
3 x | Brass control horn M4 short for wire (4 pcs) |
2 x | 20 mm carbon horn |
1 x | 6 mm aluminium horn with patella |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Cable control set |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
4 x | Small aluminium horn red (2pcs) |
1 x | Cable with accesories |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | SUS wire 3m (nylon coated) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | USB HLS prog. interface |
1 x | CC 01 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | JETImodel SINGLE BEC |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Adapter lead MPX/EC3 |
1 x | CC 05 |
1 x | Z Bender - S Type Tool |
2 x | |
1 x | Cut tube |
1 x | Hot Glue Stick BLACK |
2 x | Copier 2x20 cm pcs |
1 x | Dust collector for mould cleaning |
1 x | Hexagonal ball head 2.0 x 50 mm |
2 x | Copier 5x20 cm pcs |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Hot Glue Stick GREEN |
1 x | Vacuum pump P1-N |
2 x | Starter Sullivan-STAR 601 |
1 x | Crimping tool |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Ball Link Plier |
1 x | |
2 x | Ball Link Plier |
1 x | Screwdriver for Torx® TX8 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | 1/7 Pilot "Japanese" |
1 x | Blind nut M5 (4 pcs) |
3 x | Lock nut M5 (20 pcs) |
2 x | Quicklock washer 2 mm (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
2 x | Round flex hinge (12 uds) |
2 x | Quicklock washer 1 mm (10 pcs) |
4 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | Small pinned hinge (6 uds) |
2 x | Lock nut M5 (10 pcs) |
2 x | Horn 5/10 with M2 Bearing |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Horn mando long (2 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Extra long horn 60x30 |
1 x | 5 mm M2 variable horn |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | RH long aluminium horn (2pcs) |
1 x | Rudder forward 80x28 "type Kato" |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 2,0x50 mm allen screwdriver |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Short adjustable control horn 3x24 |
1 x | Recess mount-rem. glow plug set |
1 x | Horn mando small (2 pcs) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | 140 mm rods set for direction control |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Snap for floding prop for 2 mm axi |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Snap long M2 (10 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Pushrod octagone 3/2 |
1 x | Lead with adhesive (2 pcs) |
1 x | 100 mm rods set for direction control |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | BEC 3A FOXY |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
2 x | BlueCom™ Adapter (Android / WP) |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | Propeller diller for DA50, DLE55 red |
1 x | EC-Cutter |
2 x | Propeller diller for EME35 and DLE35 |
1 x | Steel brush wheel with 2.35mm |
1 x | |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Pistola termica MH 550 micro |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Sealing Iron Profi LCD |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Compact on-board starting system (9512) |
1 x | Blocking screws M6 gas engine |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Selfstarr EME35 |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | GLOW 2C + accesories |
1 x | Distanzstück motor OS 120 AX |
1 x | KAVAN Hand crank fuel pump |
2 x | Lock nut M4 (10 pcs) |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
3 x | Nylon Screw M4x20 |
2 x | Nut for mounting M4 (4 pcs) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | Screw M3x20 (10 pcs) |
2 x | Floating M4 washer pad (36 pcs) |
2 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Screw M3x12 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
3 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Screw M3x8(10 pcs) |
2 x | Hexagonal Nut M1 (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
3 x | Blind nut M8 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Small adjustable control horn with bearing |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Long horn 50x26 |
3 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Horn with ball 40x30 |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Window mounting channel 5m |
1 x | Refueling Cap V3 Black |
1 x | Tachometer HANGAR 9 digital |
1 x | Sealing Iron Sleeve PROF |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | MZ-18, 9 Channel HoTT |
1 x | TARANIS Q X7 |
1 x | Vacuum pump 12 CFM |
1 x | Heli blades angle measurer |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Horn for flap control (1 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Sealing Iron STANDARD |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | MZ-10, 5 Channel HoTT |
1 x | TARANIS X9D - plus EU/LBT FrSky |
1 x | RX TARANIS V8FR-II HV 2.4 GHz |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Tool for entel |
1 x | Screwdriver for Torx® TX6 |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Sandpaper file 13 mm |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Cap Hispano Aviación |
1 x | Sparkplug NGK CM6 |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
2 x | Lock nut aluminium M3 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Nylon Screw M6x40 |
1 x | Flap hinge (6 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Lock nut M2 (20 pcs) |
1 x | Lock nut M2 (10 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Nylon Screw M5x30 |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Vest clothes Hispano Aviación |
1 x | Shirt Hispano Aviación |
1 x | Softshell Hispano Aviación |
1 x | Screw M4x12 (10 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
2 x | Screw M2x8 (10 pcs) |
|
8,450.20EUR |