1 x | Silent-blocks DLE 170M |
1 x | Clip fixing for wing (2 pcs) |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | "S" set for boats |
2 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Allen wheel collar M4x4 |
1 x | 28 mm turnbuckle |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | 25 mm fenders (10 pcs) |
2 x | 80 mm rods set for direction control |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | 29,0 mm propeller (rigth propeller) |
1 x | 11 mm Rubber pads (14 pcs) |
3 x | ExtraCA Top |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Catalyst INSTA - SET™ (235g) |
2 x | Debonder UN - CURE™ (30g) |
2 x | Catalyst INSTA - SET™ (60g) |
3 x | Cyano SUPER - GOLD™ Pocket (18g) |
2 x | Cyano ULTRA - CURE™ (21g) |
5 x | SE Ring 200 mm (2 pcs) |
2 x | Marker ties (20 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | SE Ring 400 mm (2 pcs) |
3 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | 20x1000 mm Ring Strap Back To Back |
5 x | Cinta Goldfix 1m |
3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
4 x | SE Ring 330 mm (4 pcs) |
4 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
6 x | 20x200 mm battery rings |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
5 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
4 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | Spikes Band (5 m) |
3 x | Ring 320 mm length (5 pcs) |
3 x | Tape GFK 38 mm |
4 x | SE Ring 350 mm (2 pcs) |
3 x | SE Ring 450 mm (2 pcs) |
3 x | SE Ring 250 mm (2 pcs) |
4 x | Tape GFK 25 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Glases Stratus |
2 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Oracover Azul 2 m |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
3 x | 6,4x1000 mm 2:1 blue termoretract tube |
3 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Tape GFK 50 mm |
6 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Extension silicon 50 cm (Futaba) |
2 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
3 x | Bag connector 2 mm |
4 x | Extension silicon 75 cm (Graupner) |
1 x | Ferrita 17x10x6.5 mm |
2 x | 3,0x60 mm allen screwdriver |
2 x | Cyano SUPER - GOLD™ (12g) |
2 x | Thread locker IC-Loc™ blue "medium" 10 ml |
5 x | 2 mm male connector (2 pcs) with safety connector |
4 x | Digital weight, angle and balance meter BASIC |
4 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | 22m Fitting barb |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | 6 mm aluminium horn with patella |
3 x | |
3 x | Control horn long w/ball |
1 x | Horn mando long (2 pcs) |
1 x | Oracover Azul Cielo 2 m |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Futaba Female 40 cm extension |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | Horn DUBRO 1/2A |
1 x | Softshell Hispano Aviación |
1 x | 6 mm M3 variable horn |
1 x | Towing hook <3m |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Dean-T Plug Mold |
2 x | BALSA triangular 10x10x1000 mm |
1 x | 2,5x60 mm allen screwdriver |
2 x | Ball Link Plier |
2 x | SE Ring 300 mm (2 pcs) |
1 x | Cabel "Y" 30 cm (graupner) |
3 x | Connectors DEANS 4 pins (1 pair) |
4 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | Xplorer4 anemometro |
2 x | 25 mm Sandpaper file |
3 x | Cyano INSTA - CURE™ (12g) |
3 x | SIMtransmitter 6 Mode 2 |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | EC-Cutter |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
4 x | Extra long horn 60x30 |
1 x | Dremel 3000 130W |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
3 x | Banna gold connector 2,5 mm (M/F) |
2 x | Xplorer3 anemometro |
5 x | Conector FUTABA Servo male (10 pcs) |
2 x | Cable control set |
1 x | 100g Flux Paste for Silver Solder |
1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Dremel PERMAGRIT thin lime |
1 x | Horn 6/27 with M3 Bearing |
3 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Neck strap JETI DS |
4 x | |
1 x | Digital scale up to 40 kg |
1 x | DLE Ignition 111/120/170 |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
4 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Towing hook |
4 x | Big-Malibu XL Roof box with surfboard rack GREY |
3 x | Extension silicon 35 cm (Futaba) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
4 x | Connectors banna oro 2 mm (M/F) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | DYNAMOMETER S-1580 |
6 x | Conector BEC male (10 pcs) |
2 x | Glases Ace |
4 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Propeller diller for DLE111 and DA85-150 |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
3 x | 2,4x1000 mm 2:1 black termoretract tube |
4 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Trailing leg 131 mm |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Y-Hose connector 4-4-4mm |
1 x | Sandpaper file 13 mm |
1 x | Mini VISION "spread tow" CFK |
6 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Heli blades angle measurer |
3 x | Glases Flitemaster |
2 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Long adjustable control horn 3x34 |
4 x | Conector JR Servo female (10 pcs) |
1 x | Horn with ball 55x40 |
1 x | Katana S 120, pilot and panel (SebART) |
1 x | XH male balance (7S) connector (2 pcs) |
2 x | XH male balance (9S) connector (2 pcs) |
2 x | Oracover Orange 2 m |
2 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Allen wheel collar M3x3 |
2 x | XH female balance (5S) connector (2 pcs) |
2 x | Cable pass Ms 9x5 mm (10 pcs) |
1 x | FESTO connector M7 Quick 4 mm |
1 x | T- Fittings blue color (2pcs) |
2 x | Horn 6/20 with M3 Bearing |
1 x | Heli digital angle measurer |
7 x | Connectors banna oro 3 mm (M/F) |
1 x | Ball Link Plier |
3 x | Xplorer2 anemometro |
1 x | 1/10 Pilot "Jimmy" |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Telemetry interface ALTIS 6 cm |
1 x | A/C quality beech plywood 498x247x1.2 mm |
2 x | MPX Support (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Metal ring front FEMA |
2 x | 1/6 Pilot "Buddy" |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
5 x | Conector FUTABA Servo female (10 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Connectors MPX female |
1 x | Mounting single stop Ms 10 mm |
1 x | Extension silicon 25 cm (Graupner) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
3 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Horn for flap control (1 pcs) |
1 x | Fuel Fittings-Gold |
3 x | 102 mm aluminium spinner |
2 x | Cable with accesories |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | XT-90 connector (pair) |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | FESTO connector M5 Quick 6 mm |
8 x | Connectors banna oro 4 mm (M/F) (ultralight) |
4 x | Connectors banna oro 4 mm (M/F) |
1 x | Hose connector stopper 4 mm |
3 x | Conector BEC female (10 pcs) |
6 x | Connectors banna oro 3,5 mm (M/F) |
2 x | 30 cm DEANS female connector |
4 x | Mini neumatic retract landing gear |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | PRO-HV Dual Action Valve |
3 x | Altimeter Altis NAO |
4 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
2 x | Keypad ALTIS V4 |
5 x | GPS Altis |
4 x | Connectors DEANS (T) micro |
6 x | Manometer 4 mm |
4 x | Telemetry interface ALTIS to Futaba |
5 x | Altimeter Altis V4 |
3 x | Banna gold connector 2,5 mm (100 M/F pairs) |
3 x | Conector JR Servo male (10 pcs) |
3 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
2 x | Connectors DEANS (T) |
5 x | Telemetry interface ALTIS 12 cm |
1 x | Landing gear retract neumatic (Jet Legend) |
2 x | Neumatic retractable landing gear (Aero-Naut) |
4 x | Conector JR Servo male (10 pcs) |
1 x | Air pressure gauge |
6 x | 40 mm air cylinder |
1 x | Conector Servo female 4 pines |
2 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
4 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Conector JR Servo female (10 pcs) |
6 x | Connectors banna oro 2 mm (M/F) (ultralight) |
4 x | Telemetry interface ALTIS 20 cm |
2 x | Rudder forward 90x28 "type Kato" |
3 x | X-RAY Micro QR (Rudder) |
1 x | Small aluminium horn red (2pcs) |
2 x | Oracover Verde 2 m |
1 x | ORACOVER transparent Yellow (10 m) |
3 x | Cyano INSTA - FLEX+™ (25g) |
3 x | Device Terminal |
5 x | 30 cm MULTIPLEX female connector |
5 x | Connectors banna oro 8,0 mm (M/F) |
2 x | Connectors banna gold 5,5 mm (M/F) |
2 x | T- Fittings red color (2pcs) |
2 x | Reed valve for DA 50-R |
1 x | Futaba Female 40 cm extension |
2 x | Quick hose connector 3-3 mm |
4 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
3 x | Oracover Yellow CADMIO 10 m |
1 x | XT-60 connector (female) |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Extension PVC 150 cm (Graupner) |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
3 x | X-RAY Micro QR |
1 x | XH female balance (3S) connector (2 pcs) |
2 x | T-Hose connector 6-6-6 mm |
3 x | XT-30 connector (pair) |
2 x | Mini-handed clamp |
1 x | Brass control horn M2 large for wire (2pcs) |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Small aluminium horn gold (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
2 x | Xplorer1 anemometro |
2 x | RH long aluminium horn (2pcs) |
1 x | Black large kwik link (10 pcs) |
1 x | Magnetic Connect locking system |
1 x | GROB G109 Elektro 2.770 mm |
1 x | Axle for AXI 2217/xx motors |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Axle for AXI 2808/xx motors |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
2 x | Micro control horn (2 pcs) |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
2 x | Ferrita 14x8x5.5 mm |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Propeller diller for DA50, DLE55 red |
2 x | Rudder forward 70x28 "type Kato" |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Horn with ball 40x30 |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
5 x | 1000 cc gasoline fuel tank complet |
2 x | Futaba 30 mm servo rounded arm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Heat Seal Iron |
2 x | Catalog AERO-NAUT 2016 |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Axle for motor A30-XL V2 |
1 x | Universal Prop Saver |
3 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
2 x | XH male balance (2S) connector (2 pcs) |
2 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
3 x | 28x10 BIELA propeller |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | 33,0 mm propeller (left propeller) |
4 x | FESTO connector M5 Quick 4 mm |
2 x | 20 mm carbon horn |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
2 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Horn 5/15 with M2 Bearing |
1 x | SlowFlyer control horn (3 pcs) |
3 x | PowerFuel RX V2 Fuel Pump |
3 x | PowerBox Smokepump |
1 x | Canister combo DLE 55 cc |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Servo HITEC HS-5475 HB Digi |
3 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | 500 ccm gasoline fuel tank |
1 x | Servo HITEC D645 MW |
1 x | Micro control horn T2 Ø 1 |
1 x | Pitts Muffler kit for CAP 21 |
2 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Filler Gauges |
2 x | Tow hook for tug |
1 x | White large kwik link (10 pcs) |
1 x | Axle for AXI 4120/xx motors |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | 1/12 Pilot "Cougar" |
2 x | Couple M4 for wire (10 pcs) |
1 x | Rudder tandem for two Futaba servos |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Dust collector for mould cleaning |
1 x | Hot Glue Stick GREEN |
2 x | Long adjustable control horn with bearing |
1 x | Canister combo DLE 120 cc |
1 x | QS Bulkhead Valve 6/6 mm |
3 x | Festo Adaptor Tygon Large/4mm |
2 x | Lense for Spotlights, 20mm |
1 x | Glases Innovation Plus |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Small control horn with bearing (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
3 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Y-Hose connector 6-6-6 mm |
2 x | Ferrita con funda |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | 2,0x50 mm allen screwdriver |
1 x | 1/12 Pilot "Langley" |
2 x | Glases Nimbus "Black" |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Spinner red 30 mm |
1 x | Servo HITEC HS-225 MG |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | 1/6 Pilot "John" |
1 x | Quick hose connector 4-3 mm |
4 x | Landing gear strap large (4 uds) |
2 x | 120x60 mm SLH KOVO wheel |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Body for landing gear Ø 4 mm |
3 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Hitec 25 mm servo arm with M3 ball link |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | 280 cc gasoline fuel tank complet |
2 x | Servo safety connector (10 pcs) |
3 x | Brass control horn M4 long for wire (4 pcs) |
2 x | DLE 30 complete electronic ignition |
2 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
1 x | A60 Motor Mount Alu complete set |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | FESTO Filter 6 mm |
3 x | T-Hose connector 3-3-3 mm |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | MPX 8 pins plug mold |
1 x | Optotronix Aurora Plug |
1 x | Vess propeller 11x7 S |
1 x | Axle for motor A50-L |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Hot Glue Stick BLACK |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | FESTO connector M7 barb fitting 6mm |
2 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Pitts Muffler for D.A. 100 |
2 x | 27x10 prop Super Silence |
2 x | Connectors MPX black male |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Connector CAN 15 |
2 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | Ply-Span 450x600/13g Red |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | AXI Cooler 22xx |
3 x | Quick hose connector 3-3 mm |
1 x | CA Glue fast 20g |
1 x | Optical RPM Sensor |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Aero shocks |
2 x | FESTO connector M7 Quick 6mm 90º |
3 x | 700 ml complete glow fuel tank |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Glases Aspen |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
3 x | Adapter 4,0 mm M6 |
1 x | 29x23D BIELA propeller |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 22x10 BIELA propeller |
3 x | LED wire (rojo - 2pcs) |
3 x | T-Hose connector 2-2-2 mm |
1 x | A50 Backmountset complete |
1 x | MEGA GEAR 16 3,1:1 Gearbox |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Hot Glue Stick RED |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Connectors MPX male |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Servo HITEC HS-53 |
1 x | Variable Flow Smoke Pump System |
2 x | Horn 5/10 with M2 Bearing |
1 x | Vess propeller 13x6 S |
1 x | Glow filter |
1 x | Ply-Span 450x600/13g Black |
3 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Ferrita 27x14x7 mm |
2 x | Futaba 2x20 mm servo double arm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Stainless Steel Bend D 12x0,4mm |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Servo HITEC HS-485 HB |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | 18m Fitting barb |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
3 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Fixed launching hook |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | Check valve quick hose connector 4-4 mm |
2 x | 10 mm gas motor standoff |
1 x | Clamping slide 14mm (10 pcs) plastic |
1 x | MPX screwable clips (4 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Electric Fuel pump |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Tool for entel |
1 x | 18x10 BIELA pusher propeller |
2 x | Glases Nimbus |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | Canister combo DLE 120 cc |
1 x | Chili F3K 2 wing servo mounted |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | CESSNA 50E White/Blue |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
2 x | Brass control horn M2 long for wire (10pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
3 x | Connectors MPX black female |
1 x | 5 mm M2 variable inclined horn |
3 x | 6 mm red aluminium threaded horn with patella |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
2 x | FESTO connector M7 Quick 6 mm |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
1 x | Angled clevis with threaded rod M3 |
2 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Small aluminium horn blue (2pcs) |
1 x | Oracover Brown 2 m |
1 x | Servo HITEC HS-45 HB |
1 x | EME 55 cc carburetor WALBRO |
3 x | X-RAY Micro QR (Tail Tube) |
1 x | F450/550 Quadcopter, landing gear |
1 x | DH82 Tiger Moth ARC Scale 1:2 |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | Baseplate servo |
1 x | Prolongador S-Bus JR/JR 20cm |
2 x | 46 mm Futaba servo arm tandem with ball link |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Fuel Fittings-Red |
1 x | SAITO FG-36 carburetor |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Oracover White 10 m |
2 x | Rear bearing for motor 35/40 cc |
2 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | A40 Backmountset complete |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Stainless Steel Muffler D.A. 35-70 |
1 x | 120x60 mm C SLH KOVO wheel |
2 x | Propeller balancer |
1 x | 32x22D BIELA propeller |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Towing hook |
1 x | 5 mm M2 variable horn |
1 x | 3 mm Prop Adapter M6 |
1 x | SERVO DES 806 Pignons |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | 26x12 prop Super Silence |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | Cyanocrylate MD GA460 odourless 20g |
2 x | Servo DITEX EL0510M |
2 x | 22x8 BIELA propeller |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
2 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Flex-headers for Valach VM 85B2-FS |
1 x | Landing gear strap small (4 uds) |
1 x | Propeller VESS 27A |
1 x | Propadapter for motor A50 |
1 x | Fiberglass motor-holder for electric motors |
2 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Canopy Latch |
1 x | JETImodel Addcap 820 |
1 x | 12.7 mm 2:1 black termoretract tube |
2 x | Z-shaped servo mount |
1 x | FESTO Filter 4 mm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | MPX Support |
1 x | Socket head long ball link M3 (2 uds) |
1 x | 5 mm Prop Adapter M6 |
1 x | Red 4 mm connector holder |
1 x | Small kwik link (10 pcs) |
1 x | Shirt Hispano Aviación |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Propeller MEJLIK 24x10 TH |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Chopped glass fibre strands 3 mm |
1 x | 28x12 prop Super Silence |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Gear set HITEC HS-56 HB |
2 x | JM electric Pump |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
1 x | EXCITE S400 Pylon |
1 x | PYRO 750-50L Competition |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | |
1 x | 140 mm rods set for direction control |
1 x | Axle wheel with accesories |
2 x | Blind nut M6 (4 pcs) |
1 x | PIN Connector female (100 pcs) |
1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
1 x | Skyhawk (RBC Kits) |
2 x | Hitec 20 mm servo arm |
1 x | Gear set HITEC HS-85 |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | Exhaust gasket Valach 85 |
1 x | ORACOVER Ferrari red (2 m) |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
2 x | 1/4 Pilot "Mike" |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
2 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | 1/10 Pilot "Jack" |
1 x | KIRA 480-43 5,2:1 |
1 x | Axle for AXI 28269/xx motors |
1 x | Precision wrench L100 mm |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | 3.2 mm Prop Adapter M6 |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Stick coupler Ms 15 mm |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Motor A2212/13T |
1 x | DPSI OCP Overload protection |
2 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Extension Arm for Carburetor (red) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Male Prolonger TP 4/5S |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Propeller 9x7 SlowFlyer |
2 x | Receiver FUTABA R7014SB FASST Test |
1 x | Long ball link M1.6 (6 uds) |
2 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | KIRA 480-38 |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Indoor hinge with servo arm integraded |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Ball link M2 (10 pcs) |
2 x | Smoke pump RCEXL |
1 x | Cap Hispano Aviación |
1 x | 19x8 BIELA propeller |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | |
1 x | Ply-Span 450x600/13g White |
1 x | Kwik link unmount tool |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Pipa BULL MØ1 2.600mm |
1 x | Connectors MPX male (PIN double) |
2 x | Extension silicon 30 cm female (Futaba) |
1 x | Servo HITEC HS-325 BB |
1 x | Long horn 50x26 |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Motor MOKI S 250 cc 7-cylindrer |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | MPX housing with flange (4 pcs) |
1 x | SIG Coverall 1.2x1.8 m |
2 x | Surprise XII Rudder (Freudenthaler) |
2 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Axle for motor A20-S (3 uds) |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Silencer with rear exhaust DA-120 |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | Support 45% Hopper JetsMunt |
1 x | R617 FS 2,4 GHz receiver |
1 x | Handle for PERMAGRIT lime |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | KIRA 500-26 6,7:1 |
1 x | 550 cc gasoline fuel tank complet |
1 x | Epoxy 5 min. 500 g (Resin) |
1 x | Copier 5x20 cm pcs |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Porex gasoline filter |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | Mounting base Ms 8 mm |
1 x | Silencer with rear exhaust MTW TDH 110 |
1 x | LED blink wire flashing (white - 2pcs) |
1 x | TA-183 "HUCKEBEIN" (RBC Kits) |
2 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Racor "Y" 3 mm |
1 x | 1/6 Pilot "Tony" |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Head upper part |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | PowerBox Teleconverter S-BUS 2 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Adapter 3,0 mm M6 |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Tube holder |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Blade holder upper |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Neck strap Double V2 |
1 x | 13 mm wing servo holder |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
2 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | Sparkplug 1/4-32 Glow |
1 x | Cabling for Fox MDM1 wings |
1 x | DUPLEX R10 receiver REX Assist |
1 x | Recess mount-rem. glow plug set |
1 x | Reed valve petal for DLE 111 |
1 x | Miss ULTIMATE 50E Yellow/Black |
1 x | CC 03 |
1 x | Hitec 38 mm servo arm with ball link |
2 x | 17 mm servo arm with ball link DES Graupner |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
2 x | Futaba 38 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | Thundertail (RBC Kits) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Futaba 38 mm servo arm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Horizontal mounting servo holder |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 20 mm servo arm |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 52 mm servo arm |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Vertical mounting servo holder |
1 x | Futaba 25 mm servo arm with ball link |
2 x | Hitec 30 mm servo rounded arm |
1 x | Hitec 38 mm servo arm |
1 x | Servo TT ACE SHV 1504 MG |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | EME ignition free wheel |
1 x | Futaba male 40 cm extension |
1 x | Shaft sleeve LAMA |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Metalic joint for DA-150 cilinder/elbow |
1 x | Receiver R7008SB FASSTest |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | 90x60 mm standart servo cover |
1 x | Small Crow DLE-170M |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Propeller APC 11x8 Electric |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Gasket for motor DA 50 |
1 x | Propeller shaft supports 7mm (3 pcs) |
1 x | 36 mm red plastic spinner for fixed propeller |
2 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | JETI Counter for DC-24 Carbon Design 3 |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Red smoke canister 65 g |
1 x | Field folding model stand |
2 x | Motor DLE 200cc Premium Muffler |
1 x | KatanaS 50E, White wheel pants (SebART) |
1 x | Anchor of tow Met. 60 mm |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Ignition for ZG 20/26 |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | Suction funnel for carburetor 90D-M (red) |
2 x | Life guard Ø 8 mm (24 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Oracover Yellow CADMIO 2 m |
2 x | DUPLEX MRMP Hall EX |
1 x | Tail wheel for 5-8 kg models |
2 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | ER50 (40 Kg) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Propeller electric carbon 6x5 |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Switch Cap L (silver) |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | PowerBox MAG Sensor |
1 x | Cylinder ZG 26SC/SLH |
1 x | EXHAUST STACK Ø 25 mm GP-61/123 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
1 x | Parachute PV6 for F3J |
1 x | Rafale C (Aero-naut) |
1 x | CC 02 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
2 x | Oracover Yellow CUB 2 m |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Optotronix X-Carrier |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Extension silicon 100 cm (Graupner) |
1 x | DC Small for MultiLog & UltraLight |
1 x | MythoS 125E WHITE/BLUE (SebART) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Extension Arm for Carburetor |
1 x | 42,0 mm propeller (left propeller) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Decorative caps, multicoloured |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Katana 30, Decal set (Sebart) |
1 x | Oracover White 2 m |
1 x | Windsock Ozone L - 700 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Foam air filter Ø 48 mm, blue |
1 x | A/C quality beech plywood 498x247x2.0 mm |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Cooler motor type 400 |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | switch short 3-position DS Tx DUPLEX 2,4EX |
2 x | Motor mount EDGE 540 48" |
2 x | SWTU2 switch |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Big Crow DLE-170M |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Piston ring for DA-150 |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Motor DLE 55 cc |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Combo lighting module with covering drop shape |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | DUPLEX USB Adapter |
1 x | Circlick securite |
1 x | 11 mm wing servo holder |
1 x | Compact on-board starting system (9724) |
1 x | Aluminium ignition bad (red) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | ROBIN S50E BLUE/WHITE |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | LAESR 200 60" Red/White |
1 x | 2 LiPo XH>EH adapter |
1 x | Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2 |
2 x | Propeller CFK 11x8 |
1 x | DUPLEX 2.4EX MUI 75 |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
3 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | MIG 29 3D RTF, Servo |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Neck strap JETI DC |
1 x | Gold antispark 5,5 mm plug |
1 x | Servo holder for retract |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Spring clamp for tube Ø50 mm |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61 |
1 x | Suport PITOT |
1 x | Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2 |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Propeller electric carbon 7x7 |
1 x | MT 125 temperature sensor |
1 x | Long pinned hinge (6 uds) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Castrol Oil A747 1l |
1 x | PT 20x13 EL Propeller |
1 x | Metal clevis M2,5 (10 uds) |
1 x | wire tensioner (red) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | PowerBox iGyro 3xtra |
1 x | DUPLEX 2.4GHz GPS |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | EnLink 2RS Plus - DUO |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | 50 class GLOW conversion set (SebART) |
1 x | Servo HS-5070 MH Hi Volt |
1 x | AngelS 50E Yellow cockpit(SebART) |
1 x | Motor DLE 20 cc |
1 x | Propeller balancer |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Extension for LC-Display 50cm |
1 x | Ply-Span 450x600/13g Blue |
1 x | THERMIK XL 4000 mm |
1 x | Coupling for 3 mm axis |
1 x | Threaded coupler M3 (10 uds) |
1 x | Angle of incidence meter |
1 x | Servo HS-7980TH digi high voltage ultra torque |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Servo FUTABA BLS175 SV |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
2 x | Extension 100 cm (Futaba) |
1 x | Fuel dot V3 (Silver) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | MythoS 50E White/Blue |
1 x | Macchi MC72 50E RED/GOLD |
1 x | ODYSSEY Navy ARF 2190 mm |
1 x | 3 mm Leader (L 100 mm) |
1 x | Propeller diller for DLE170 |
2 x | Futaba Radio Case |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
2 x | Fuel line plugs (Black) |
1 x | Housing Ø 6 mm (20 pcs) |
1 x | Electron 22 mm Fitting barb |
1 x | Racor 4/3 mm |
1 x | Piston ring for motor 58/116 cc |
1 x | Flap hinge (6 pcs) |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | Propeller POWER-PROP 14x10 |
1 x | Joint for DA-50 reed valv |
1 x | Short ball link M2 (6 uds) |
1 x | NF-3XL set |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Muffler DLE-120 Right |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | PowerBUS Lead 200 cm |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | VBar NEO |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26 |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Dual Sequencer Gear and Canopy |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Light System |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Metal clevis M3 (10 uds) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | SAVOX SH 0255 MG servo |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Reed valve petal for DA 60 carburator |
1 x | Giant Scale Muffler D.A. 70 (2pcs) |
1 x | F-20 Tigershark (RBC Kits) |
1 x | Servo Digital HITEC HS-5035 HD |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Reed valve cage with petals for DA 100/150 |
1 x | Mold plugs XT-30 |
2 x | DUPLEX 2.4EX MT 300 EX |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | RB-45 Electronic |
1 x | P-47 Struts + Wheels (CY model) |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | MythoS 125E YELLOW/BLACK (SebART) |
1 x | Gracia (Top Model) |
1 x | Strut M 1:50 3D (30 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | 10 mm Prop Adapter M12 |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Motor DLE 200cc Std |
1 x | EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ... |
1 x | EXTREME FLIGHT EXTRA 300-78" (1.98 m) ARF Red (EXTREME FLIGHT) |
1 x | Piston ring for DLE-55/111/222 |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Ball link M3 RPA's-UAV's |
1 x | SUPER DIMONA TC-80 |
1 x | Castrol Oil TTS 1l |
2 x | Cable grommet 9.5 mm (4 uds) |
1 x | Extension Ø25mm x L: 60 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Electromagnets brake |
1 x | Gasoline filter |
1 x | SPARK Switch 5.9v |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Propeller electric carbon 8.5x7 |
1 x | wooden stairs (kit) 70 mm |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Long ball link M2 (6 uds) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Glider STROLCH |
1 x | Navaho new design (Top Model) |
1 x | Receiver DUPLEX R9 EX 2.4 GHz |
1 x | Canister combo DLE 111 cc |
1 x | 5 line servos wire black (1 m) |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Wots Wot Foam-E ARTF (Ripmax) |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | EXHAUST STACK Ø 28 mm DA75/150B2 |
1 x | Pick up EME 55/60 cc |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | Coupling for 5 mm axis |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Round Rod 1,0x1000 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
1 x | Mig-25 "FOXBAT" (RBC Kits) |
![](images/pixel_black.gif) |
85,336.20EUR |