186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Motor DLE 170 M- Paramotors
1 x Big Crow DLE-170M
1 x Silent-blocks DLE 170M
1 x Small Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x Softshell Hispano Aviación
1 x Vest clothes Hispano Aviación
1 x Adjustable launching hook
1 x Green smoke canister 100 g
1 x B4-0 rocket charges (6 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
2 x Fixed launching hook
1 x Red smoke bombs AX-60 (5 pcs)
1 x Blue smoke canister 100 g
1 x AX-60 starters (5 pcs)
1 x Red smoke canister 140 g
1 x White smoke canister 65 g
1 x Red smoke canister 100 g
2 x SE Ring 300 mm (2 pcs)
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Foil for sticking flaps and ailerons
2 x Spikes Band (5 m)
1 x SE Ring 240 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 330 mm (4 pcs)
2 x 20x200 mm battery rings
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x XH female balance (5S) connector (2 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Savox Brushless Servo SB-2271SG
2 x Check valve quick hose connector 4-4 mm
2 x Quick hose connector 3-3 mm
1 x Body for landing gear Ø 4 mm
2 x SERVO DES 707 BB MG
1 x SAVOX SH 0254 servo
2 x SERVO DES 707 BB MG, Pignons
2 x 40 mm air cylinder
1 x Servo SAVOX SV-1270 TG
1 x 25 mm carbon servo arm
2 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x SU 29S 140 carbon landing gear
1 x Nose leg 155 mm with wheels 70 mm
1 x Horizontal servo holder
1 x Futaba 20 mm servo arm
2 x Motor DLE 200cc Std
1 x Motor DLE 200cc Premium Muffler
1 x HITEC 20 mm servo arm with ball link
1 x Servo holder for retract
1 x Gasket electric Fuel Pump
2 x GLOW 5C + accesories
1 x Servo HITEC D951 TW
2 x Electric Fuel pump
1 x PowerFuel RX V2 Fuel Pump
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Secraft Fuel system v2, red color
1 x Gear carbonite set HITEC HS-6965
1 x Servo HITEC D131 MW nano
1 x Servo HITEC D85 MG
1 x Gear set HITEC HS-65 HB
1 x Servo HITEC HS-311
1 x Servo HITEC D954 TW
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HITEC HS-225 MG
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
2 x Electric Fuel Pump 12V
1 x SE Ring 360 mm (2 pcs)
1 x GLOW 9C + accesories
1 x Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x SE Ring 450 mm (2 pcs)
1 x Giant Scale Muffler D.A. 70
1 x LOWER TOW HOOK
1 x ABS Strip 1.5x8.0x1000 mm
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x Adapter 4,0 mm M8
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 3,2 mm M6
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Adapter 3,2 mm M8
1 x 3 mm Long Prop Adapter M5
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Actuator Electric 25 mm
1 x KIRA 600-38 6,7:1
1 x PYRO 700-45 Long Axi
1 x PYRO 700-56L
1 x Jeti Black cap
1 x Rocket D3-P
1 x SE Ring 480 mm (2 pcs)
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 20x1000 mm Ring Strap Back To Back
1 x 
1 x SE Ring 250 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Servo TT ACE SHV 1504 MG
1 x SERVO DES 568 MG
1 x Landing gear clamp for Ø 4 mm (4 uds)
1 x Quick hose connector 4-4 mm
1 x Landing gear strap medium (4 uds)
1 x Servo DITEX TD2612S
1 x Bearing block for noseleg landing gear
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x 160 mm carbon undercarriage (2pcs)
1 x SSPS105 Super Hi-Power servo
1 x Compact on-board starting system (9724)
1 x Electromotor starter EME 35cc
1 x Motor MVVS 2.0/1120
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x Soporte metal para servos
1 x SERVO DES 658 BB MG
1 x SERVO DES 806 Pignons
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Dual Sequencer Gear and Canopy
1 x Faucet FESTO
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Landing gear clamp for Ø 3 mm (4 uds)
1 x Nylon threaded block M4 (2 uds)
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Nylon threaded block M6 (2 uds)
1 x Festo Adaptor Tygon Large/4mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Angled clevis with threaded rod M3
1 x Hose stopper 4 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Landing gear strap large (4 uds)
1 x Landing gear strap small (4 uds)
1 x Festo 4mm Tubing Holder (10 uds)
1 x Body for landing gear Ø 3 mm
1 x Landing gear clamp for Ø 2 mm (4 uds)
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Nylon gear block Ø 6 mm (2 uds)
1 x Socket Head Screw M2,5x12
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x SAVOX SH 0254 servo
1 x Legs + electric brakes for Viper Jet 90
1 x Fiberglass landing gear for 140-160
1 x Indoor landing gear set
1 x Servo DITEX EL0510M
1 x Gearbox for VM motors (3:1)
1 x DLE 30 complete electronic ignition
1 x Aluminium ignition bad (red)
1 x Variable Flow Smoke Pump System
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Starter EM Gear Power 250
1 x Servo HITEC HS-635HB Carbonite
1 x GLOW 2C + accesories
1 x Set Micro-horns HS-60/81/85
1 x Servo HITEC HS-70 MG
1 x BULL MØ1 2.600mm "ALPINE"
2 x Servo HITEC HS-5485 HB Digi
1 x Fuselage BULL MØ1 2.600mm
1 x Servo HITEC HS-5685MH
1 x Double side nipple
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servo HITEC HS-785 HB
1 x Dryfluid suet for reducing
1 x Servo HITEC HSB-9370TH
1 x Set transmisions ULTIMATUM 2.0 (dura/aluminium)
31,549.34EUR
Manufacturers
Languages
Español English
Currencies