186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Interface Realflight Simulator
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x RF9 Flight Simulator with Spektrum Controller
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
2 x Vacuum bag, 1200 mm x 50 m
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x Socket head ball link M3 (2 uds)
1 x Ball link M1.6 (6 uds)
1 x Ball link M2,5 (10 pcs)
4 x Ball link M3 (10 pcs)
3 x M2 5Diam black ball link V2 (2 pcs)
2 x M3/5Diam metal ball link V3 (2 pcs)
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Long ball link M3 (6 uds)
1 x Ball link M3 RPA's-UAV's
2 x M3 Maxi ball link (2 uds)
2 x M2,5 Diam metal short ball link V3 (2 pcs)
2 x M3 INDUSTRIAL ball link (2 uds)
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Joint with bearing M3 22x5,5
2 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Short ball link M3 (6 uds)
1 x Joint with bearing M2,5 22x5,5
2 x Ball link M3 (10 pcs, flat ball)
2 x M3 Maxi ball link (2 uds)
3 x Joint with bearing M2 22x5,5
2 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
2 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
3 x Landing gear axle Ø 4 mm (2 uds)
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
2 x SE Ring 330 mm (4 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x BEC 3A FOXY
1 x Slave-cable USB Easy Sim
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x LiPo Storage Box Type "P"
2 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
2 x PowerPack 2.5X2 PRO
1 x LiPo Storage Box Standard 1 Type 1
2 x Battery RX JETI LiIon RB 6200 7.2v
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
2 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Aluminium battery holder red
1 x Styrene plate 320x120x1.0 mm
2 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Sparkplug ROSSI R8
1 x Sparkplug DLE CM6
2 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x PowerBox Smokepump
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Sparkplug 1/4-32 EVO 10GX
1 x Socket head ball link M3 (2 uds)
3 x Short ball link M2 (6 uds)
2 x Spikes Band (5 m)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 450 mm (2 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Ring 320 mm length (5 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 6 mm ball link M3 (10 pcs)
1 x Long ball link M2 (6 uds)
1 x Long ball link M1.6 (6 uds)
3 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
3 x Ball link M3 (6 uds)
3 x M2 5Diam short black ball link V2 (2 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x SE Ring 480 mm (2 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x SE Ring 360 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Tape GFK 25 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
2 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
2 x Socket head long ball link M3 (2 uds)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
2 x Short ball link M1.6 (6 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Styrene plate 320x120x0.5 mm
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x PVC grid straight 290x185x0.32 mm
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x LA500 pre-rotation gear
1 x Blade holder center GFK 0,5 mm
1 x Cierva C30 simulated motor
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x PVC grid diagonal 290x185x0.32 mm
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x Release film 100 cm x 50 m
1 x Glass fibre sleeve Ø 20 mm
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Glass fibre braided sleeve (45mm) roll 20m
1 x LA500 housing-lower cyclic
1 x Complet landing gear
1 x LA500 ciclic lever
1 x Balls 4 mm
1 x LA500 pre-rotation gear hub
1 x Head spacer
1 x Baal link 4/14/4 (5 pcs)
1 x LA500 pilot-seat set
1 x Cierva C30 Body Spain
1 x Head runner
1 x LA500 rotor head core
1 x LA500 cyclic central part
1 x Bearing 3x6x2,5
1 x LA500 rotor head shaft
1 x Battery plate
1 x Blade holder center
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Head lower part New
1 x Blades 330mm
1 x Head core
1 x Head lower part
1 x Cierva C30 Elevator
1 x Baering 3x8x4
1 x Blade holder lower
1 x LA500 front gear holder
1 x Head upper part
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x wire tensioner (blue)
1 x Threaded coupler M2,5 (10 pcs)
1 x Turnbuckle M2x29/43 (2pcs)
1 x Wire easy tensioner (red)
1 x Small kwik link (10 pcs)
1 x Ventus 1:4 set of instruments
1 x 20x200 mm battery rings
1 x ABS tube 20.0x18.0x1000 mm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x FESTO Filter 4 mm
7,752.66EUR
Manufacturers
Languages
Español English
Currencies