186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Small Crow DLE-170M
1 x Silent-blocks DLE 170M
1 x Big Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Std
1 x BALSA trip 8.0x8.0x1000 mm
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x A/C quality beech plywood 600x300x0.8 mm
1 x BALSA triangular 15x15x1000 mm
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x ABS angle 2,0x2,0x1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x Buy Perforated film 100 cm / 20 m
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Oracover CHROME 2m
1 x Profile ABS Square 2 x 1000 mm
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Balsa panel 5.0x100x1000 mm
1 x 6,4x1000 mm 2:1 blue termoretract tube
2 x BALSA trip 4.0x4.0x1000 mm
1 x Truck-trailer for gliders 720 x 285 mm
1 x Oracover Azul 2 m
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Surface Indicator Gauge Small
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
2 x BALSA triangular 10x10x1000 mm
1 x 2,4x1000 mm 2:1 black termoretract tube
2 x BALSA trip 2.0x10.0x1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Glases Ace
1 x Balsa panel 4.0x100x1000 mm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x 1,2x1000 mm 2:1 black termoretract tube
2 x MYLAR film A350 (1000x500 mm)
1 x Suncover 100cc Red
1 x Balsa panel 1.0x100x1000 mm
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
2 x ABS Strip 1.5x6.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x ABS 500 x 400 x 1 mm (white)
1 x Medidor ángulos y/o incidencias
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
2 x 4,8x1000 mm 2:1 black termoretract tube
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Profile ABS half cane 5.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Green silicone 0,25 qmm wire (50 m)
1 x Futaba male 40 cm extension
1 x Cable Cargador FUTABA
1 x Allen wheel collar M3x3
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x PPM Encoder Module
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cabel "Y" 15 cm
1 x Horn 5/20 with M2 Bearing
1 x Extension silicon 75 cm (Futaba)
1 x Piloto JET 1:3,5
1 x Muffler DLE-120 Right
1 x CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x Pilot "Goose" (Slimline)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Extra long horn 60x30
1 x 1/4 Pilot "Mike"
1 x Extension 15 cm (Futaba)
1 x Horn with ball 40x30
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Cable S.BUS 3 salidas 300 mm
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x DYNAMOMETER S-1580
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium ignition bad (blue)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x 30 mm gas motor standoff
1 x 
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium battery holder red
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x 10 mm Quick clamp_L (6 pcs)
1 x Para-RC Mix
1 x La Capitania di Venetia 1:50
1 x Anchor 50 mm (2 uds)
1 x Regulador NAVY 540R
1 x Anchor 80 mm (2 uds)
1 x Rigid coupling brass Ø 2 mm L: 15 mm
1 x Ancla metal 40 mm (2 uds)
1 x Escape DLE-60 Dcha
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 63 mm INO spinner (carbon imitation)
1 x Spinner INO 89 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x 51 mm INO spinner (carbon imitation)
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x PROFICOVER 5m
1 x Oratex White 2m
1 x PVC termo-retract battery 45 mm transparent orange (1 m)
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x 75 mm INO spinner (carbon imitation)
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x 89 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x Falcon Carbon Spinner 82mm for electric motor
1 x Spinner 82mm Black ventilado
1 x F3A carbon 95 mm spinner
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x 57 mm INO spinner (carbon imitation)
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x 102 mm INO spinner (carbon imitation)
1 x Nut for 515/518/519 spinner special for Hacker
1 x F3A carbon 85 mm spinner for AXI
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x 82 mm INO spinner (carbon imitation)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner INOVA 102 mm Black
1 x SIG Coverall 1.2x1.8 m
1 x Oratex Natural White 20m
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x Cross Connector 4.0 mm x 1000 mm
1 x Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x Panel Honeycom carbon 350x150x3.5mm
1 x PVC red battery termo-retract 68 mm (10 m)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Jeti Box mini
1 x ABS Strip 1.0x2.0x1000 mm
1 x DYMOND VTX UBS Programming adapter
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Pushrod octagone 4/3 with coupler M3
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x Pine wood slat 1.5x3.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Glass fabric 425 g/m² aero,10x1m
1 x ABS angle 3,0x3,0x1000 mm
1 x Glass fabric 390 g/m² aero,10x1m
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x BALSA triangular 8x8x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Profile ABS Square 3 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x ABS angle 5,0x5,0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x Altimeter Altis V4
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Telemetry interface ALTIS to Futaba
1 x 19 mm 2:1 black termoretract tube
1 x Strip 2,5x1,25x330 mm
1 x Strip 3,5x1,75x330 mm
1 x ProgBOX MASTER Hacker
1 x Strip 1,5x1,5x330 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Jeti Advance Pro Program Card
1 x Fuel dot V3 (Silver)
1 x Fuel dot V3 (Blue)
1 x Motor Mount for Multiplex FunJet
1 x Red aluminium double servo arm FUTABA 40 mm M3 F3A
1 x Rocket D3-P
1 x Parachute expulsion foam
17,186.04EUR
Manufacturers
Languages
Español English
Currencies