186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Rotorshape Autogyro
2 x Vest clothes Hispano Aviación
1 x LA500 cyclic central part
1 x Side Plate
1 x White smoke canister 100 g
1 x 6 mm blue aluminium threaded horn with patella
1 x Small aluminium horn blue (2pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x AX-60 starters (5 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x M2,5 Diam metal ball link V3 (2 pcs)
2 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Short ball link M2 (6 uds)
1 x Yellow smoke canister 100 g
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Cable with accesories
1 x Horn 6/35 with M3 Bearing
1 x Hose clips 6 mm
2 x Straightened threaded rod M3 - 1m
1 x Steering arm 16 mm Ø 4 mm
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Tow hook for tug
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x BALSA trip 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Pilot JAN 1/4 Saiplanes
1 x Extension silicon 75 cm (Graupner)
1 x Plasti Dip Liquid Tape 429 ml orange
1 x M3 black washers (4 pcs)
1 x Paint gun for sprays
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Spring lock washer 2.6 mm (20 pcs)
1 x 1000 ml sealer (DOPE)
1 x Extension silicon 50 cm (Futaba)
1 x Quicklock washer 1 mm (10 pcs)
1 x LOWER TOW HOOK
2 x BALSA trip 3.0x3.0x1000 mm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
2 x BALSA triangular 15x15x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Cable S.BUS 3 salidas 300 mm
1 x Extension silicon 10 cm (Futaba)
1 x Beech dowels 10 mm x 1000 mm
1 x Extension silicon 30 cm female (Futaba)
1 x Pilot "Anthony" (Slimline)
1 x BALSA triangular 10x10x1000 mm
1 x Extension 7.5 cm
1 x BALSA leading edge 8x10x1000 mm
1 x 1/6 Pilot "Cindy"
1 x Flat washer 4.3 mm (20 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Nitroverdu 500 ml
1 x Extension silicon 100 cm (Graupner)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Lock washer 2.7 mm (20 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Extension silicon 30 cm female (Graupner)
1 x Solvent Plasti Dip 1000 ml
1 x Extension 30 cm (Futaba)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Cabel "Y" 15 cm
1 x Spray adhesive AEROFIX 2
1 x PowerBox Smokepump JETs 2x outside
2 x Aluminium cap bolt washer M4 red (8 pcs)
1 x 1/12 Pilot "Fighter"
1 x 1/4 Pilot "Heidi"
1 x Variable Flow Smoke Pump System
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x 
2 x Softshell Hispano Aviación
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x 57 mm micro-mini servo cover
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x ALBATROS 3.0 m (orange/white)
1 x 58 mm micro servo cover
1 x 38 mm Alu spinner 5 mm pleg. propeller
1 x 65 mm mini servo cover
1 x Bidule 170 ARF 3.48 m
1 x Albatros red/white (Top Model)
1 x 18 mm wing servo holder
1 x Bags BULL Mo1 2.6m "Luxe"
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Universal Colour Paste white 50 g
1 x Presto SF Light Filler styrene-free (420 g)
1 x Futaba 54 mm servo arm with ball link
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Hitec 38 mm servo arm with ball link
1 x Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Extension PVC 150 cm (Graupner)
1 x Futaba Female 40 cm extension
1 x Liston HAYA 10 x 10 x 1000 mm
1 x 10 mm Prop Adapter M12
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x 30 mm Alu spinner 3 mm pleg. propeller
1 x Albatros ,spare cockpit (Top Model)
1 x Bidule 111 3000 mm Canopy
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Astra (Top Model)
1 x Bidule 55 V3 2460 mm
1 x Bidule 55 2460 mm Cabina
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x ARTIST 1.560 mm
1 x ACTIVE ARF Electric 1.995 mm
1 x 13 mm wing servo holder
1 x 34 mm Alu spinner 4 mm pleg. propeller
1 x Albatros ,spare fuselage (Top Model)
1 x Angle measurer
1 x BULLIT Wing 1095 mm
1 x 50x45 mm micro-mini servo cover
1 x 90x75 mm standart servo cover
1 x Avia (Top Model)
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Adjustable launching hook
1 x Angle of incidence meter
1 x Bidule 111 3000 mm
1 x 
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x SAITO FG-36 carburetor
1 x ULTIMATUM 2.0 m green/black
1 x Shirt Hispano Aviación
1 x Joint with bearing M2,5 22x5,5
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x Ball link M3 RPA's-UAV's
1 x Long ball link M2 (6 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x Canopy BULL MØ1 2.600mm
1 x BULL MØ1 2.600mm GREEN
1 x Angled clevis with threaded rod M3
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x Servo GO-09 9g
1 x 1/6 Pilot "Buddy"
1 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x Quicklock washer 2 mm (10 pcs)
1 x Red aluminium servo arm V3-Futaba 3,5inch
1 x Gold aluminium servo arm V2-JR 1,5" inch M3
24,014.49EUR
Manufacturers
Languages
Español English
Currencies