186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cabin latch Fox MDM1 4m (pair)
2 x 100 mm rods + T patellas set for direction control
1 x Cable grommet 9.5 mm (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Allen wheel collar M3x3
1 x Clip fixing for wing (2 pcs)
1 x 140 mm rods + T patellas set for direction control
1 x 38x4,5 mm wires output (2 pcs)
1 x Allen wheel collar M4x4
1 x Canopy Latch
2 x 45 mm rods + T patellas set for direction control
1 x 140 mm rods set for direction control
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x 41x5,5 mm wires output (2 pcs)
1 x Cable grommet Ø 5 mm (4 uds)
1 x 100 mm rods set for direction control
1 x Cable grommet Ø 4 mm (4 uds)
1 x 250 mm / 16 mm Airbrakes
1 x Cockpit aluminium closing
1 x 90 mm rods + T patellas set for direction control
1 x Allen wheel collar M3x5
1 x Cable tie mounts 4.3 (4 uds)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Allen wheel collar M4x6
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 45 mm rods set for direction control
2 x Ventus 1:4 set of instruments
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 4.0x3.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 8.0x6.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 8.0x7.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x White smoke canister 100 g
2 x White smoke canister 140 g
2 x Yellow smoke canister 100 g
1 x B4-0 rocket charges (6 pcs)
1 x Yellow smoke canister 140 g
1 x Electric rocket starters (6 pcs)
1 x "S" set for boats
1 x AX-60 starters (5 pcs)
1 x Red smoke canister 140 g
1 x PCARD Wireless System
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Green smoke canister 140 g
1 x "M" set
1 x Ventral support for AX-18/AX-60
1 x White smoke bombs AX-9 (10 pcs)
1 x Smoke set "S"
1 x Remote electric ignition system
1 x Yellow smoke canister 65 g
1 x Blue smoke canister 100 g
1 x White smoke canister 65 g
1 x Parachutist
1 x Blue smoke canister 140 g
2 x "S" set for planes
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Round Rod 3,0x1000 mm
1 x Gates hinge
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x 80 mm rods set for direction control
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Pilot "Anthony" (Slimline)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x 11 mm Rubber pads (14 pcs)
1 x Actuador lineal HLS12-100210-7.4v
1 x Gear for D 54
1 x 40 mm servo arm with bearing (2 pcs)
1 x FUTABA 20 mm servo arm with ball link
1 x 2 mm Prop Adapter M5
1 x Adapter 3,2 mm M6
1 x Adapter 3,0 mm M8
1 x Smoke pump RCEXL
1 x Adapter 3,2 mm M8
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x SE Ring 400 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Marker ties (20 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
2 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 3,0 mm M6
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Adapter 4,0 mm M6
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Red smoke canister 100 g
1 x ABS tube 5.0x4.0x1000 mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Servo safety connector (10 pcs)
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x FESTO connector M7 barb fitting XL Tygon
1 x FESTO connector M5 Quick 6 mm
1 x FESTO connector M7 barb fitting 6mm
1 x Servo AN-20 MGBBA
1 x Futaba 38 mm servo arm with ball link
1 x Servo BLUE Bird BLS-H71B v2
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
2 x 1000 ccm gasoline fuel tank
1 x Hexagonal ball head 2.0 x 50 mm
1 x Hot Glue Stick BLACK
1 x Crimping tool
1 x Screwdriver for Torx® TX6
1 x Starter Sullivan-STAR 601
1 x Cut tube
1 x Z Bender - S Type Tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Ball Link Plier
1 x Hot Glue Stick RED
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x 1,5x50 mm allen screwdriver
1 x Vacuum pump P1-N
1 x Screwdriver for Torx® TX8
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x 2,0x50 mm allen screwdriver
1 x Screwdriver for Hexagon 1,27mm
1 x Copier 5x20 cm pcs
1 x 2,5x60 mm allen screwdriver
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 
1 x Digital precision scale up to 2000 g
1 x Starter EM Gear Power 80
1 x Vacuum pump 12 CFM
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Hot Glue Stick GREEN
1 x 
1 x Starter Sullivan-STAR 603 DINATRON
1 x Z Bender - S Type Tool
1 x Crimping tool
1 x Screwdriver for Hexagon 1,5mm
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Foil for sticking flaps and ailerons
1 x Tape GFK 25 mm
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x 3-blades 16x10 carbon prop Super Silence
1 x Turbina XICOY X180 compact
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x 55% silver electrodes (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 350 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Festo Adaptor Tygon Large/4mm
1 x T-Hose connector 2-2-2 mm
1 x FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent)
1 x Fuel line plug Small 2 pcs
1 x Excentric gearbox for 2,0mm axis (3,75:1)
1 x Excentric gearbox for 2,0mm axis (4,5:1)
1 x PT 16x10 E Propeller
1 x 
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Plastic wheels 30 mm (2 pcs)
1 x Hitec 20 mm servo arm
1 x Locking cable tie 4.6x203 (uds)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x 3-blades 21x12carbon prop Super Silence
1 x Telemetria XYCOY adapter
1 x Threaded coupler M2 (10 uds)
1 x Device Terminal
1 x Altimeter Altis V4
1 x Altimeter Altis NAO
1 x Telemetry interface ALTIS 12 cm
7,313.23EUR
Manufacturers
Languages
Español English
Currencies