186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Adapter lead MPX/XT60
2 x TP/TopFuel - JST-EH 4/5S Adapter
2 x CC 05
2 x Fixed launching hook
1 x 3 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x Adjustable launching hook
1 x Towing hook
1 x Towing hook <3m
1 x JETImodel SINGLE BEC
1 x Futaba External voltage input cable Futaba CA-RVIN-700
2 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x USB HLS prog. interface
2 x Circlick securite
1 x MPX-Dean "T" Adapter
2 x 5 LiPo XH>EH adapter
1 x Cabel charger transmitter GRAUPNER
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Towing hook
2 x CC 01
1 x Adapter lead MPX/EC3
1 x BEC 3A FOXY
1 x CM-3
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Dean "T" - Futaba Adapter
1 x 30 cm BEC cable (female)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 4 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x 800TVL CMOS camera for FPV
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x ASW 20 5000 mm with winglets (Airwold)
1 x ASW 15 5000 mm (Airwold)
1 x Motor OS 3820-1200 electric
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Glider Ka 7 Red (2540mm)
1 x TAKEO 3.6m electric
1 x Soporte grifo FESTO (2 pcs)
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Nut for mounting M3 (10 pcs)
1 x Lock nut M5 (20 pcs)
1 x Hexagonal Nut M4 (10 pcs)
1 x Hexagonal Nut M4 (20 pcs)
1 x Lock nut M6 (10 pcs)
1 x Lock nut aluminium M3 (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x Nut for mounting M4 (4 pcs)
1 x TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG
1 x TopFuel LiPo 25C-ECO-X 350mAh 2S
2 x TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG
1 x TopFuel LiPo 35C-POWER-X 2400mAh 2S
1 x Conector FESTO G1/8 Quick 4mm 90º
2 x Shirt Hispano Aviación
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Quick hose connector 3-3 mm
1 x LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG
1 x TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG
1 x T- Fittings blue color (2pcs)
1 x TopFuel LiPo 35C-ECO-X 7500mAh 6S MTAG
1 x FESTO connector M5 Quick 4 mm
1 x T- Fittings red color (2pcs)
1 x LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG
1 x Extra hard 250 ccm complete gasoline fuel tank
1 x FESTO connector 1/8 Quick 6mm 90º
1 x 1000 cc gasoline fuel tank complet
1 x Support 45% Hopper JetsMunt
1 x 500 ccm gasoline fuel tank
1 x LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG
1 x FESTO connector M7 barb fitting XL Tygon
1 x MAX BEC
1 x Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x Interruptor SPS 70v 60/120A
2 x SPS 70V 100/200 A
1 x TP/TopFuel - XH 2/3S Adapter
1 x Giant Scale Muffler D.A. 70
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Propeller diller for DLE111 and DA85-150
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x SBEC 30 D
1 x SBEC 40
1 x SPARK Switch 7.4v
1 x Three-position switched channel, short
1 x Multi-adapter balancer JST/C - TP
1 x Prolonguer for Balancer Thunder Power 6S
1 x PowerBox SparkSwitch RS
1 x Lunak ARF 2000 mm Yellow (Hacker Model)
1 x Mini VISION "spread tow" CFK
1 x THERMIK XL 4000 mm
1 x Electric spoiler 300 mm (2 pcs)
1 x Propeller POWER-PROP 11x9
1 x Lock nut aluminium M2 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Propeller electric carbon 8.5x7
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x ORACOVER transparent Yellow (10 m)
1 x TopFuel LiPo 35C-X 5000mAh 6S
1 x UHU Por 50ml/40g
1 x GLOW 9C + accesories
1 x 2,0x50 mm allen screwdriver
1 x Glider KNIRPS
1 x Blind nut M4 (4 pcs)
1 x CYCLONE XT 6.2m ARF
1 x Lock nut M2 (20 pcs)
1 x Propeller electric carbon 9.5x6
1 x Propeller electric carbon 9.5x5
1 x Propeller POWER-PROP 15x10
1 x Blind nut M6 (4 pcs)
1 x Propeller POWER-PROP 13x9
1 x Fascination 3600 mm, Spare Elevator (Top Model)
1 x Fascination 3600 mm ARC
1 x LiPo TopFuel ECO-X 2000mAh 2s RX
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x Tubo espiral FESTO 6x1 Black
1 x TopFuel LiPo 20C-ECO-X 5000mAh 3S MTAG
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x T-Hose connector 4-4-4mm
1 x double Fuel Dot V2 (silver)
1 x TopFuel LiPo 20C-ECO-X 4500mAh 6S MTAG
1 x QS Bulkhead Valve 6/6 mm
1 x TopFuel LiPo 20C-ECO-X 4500mAh 3S
1 x TYGON tubo 1 m Diam. 3.4 x 2.0 mm
1 x TopFuel LiPo 25C-ECO-X 1300mAh 2S
1 x Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x Refueling kit for Cap "Red"
1 x Tygon tube 4.8 x 3.2 mm 15 m
1 x Tank gas KUZA 260 cc
1 x 1000 ccm gasoline fuel tank
1 x Vest clothes Hispano Aviación
1 x Pegamento Pu R 50g polyuretano
1 x UHU hart 35 g
1 x FOAM - CURE™ (24g)
1 x Cooler motor type 400
1 x Cooler motor type 280
1 x Propeller 8x4,3 SlowFlyer
1 x Propeller 10x4,7 SlowFlyer
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 1,5x50 mm allen screwdriver
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x 4,8x1000 mm 2:1 red termoretract tube
12,469.00EUR
Manufacturers
Languages
Español English
Currencies