Top » Catalog » Acces. for Motors » Fuel/Smoke Pumps » POWER8015

186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

under request

Reviews

Quick Find

Shopping Cart

1 x	1,6x1000 mm 2:1 black termoretract tube
2 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Oracover Azul Cielo 2 m
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	6,4x1000 mm 2:1 blue termoretract tube
2 x	1,2x1000 mm 2:1 black termoretract tube
2 x	Monokote BLANCO jet (1.8x0.65m)
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	37 mm PVC transparent battery termo-retract (1 m)
2 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Azul 2 m
1 x	19 mm 2:1 black termoretract tube
3 x	2,4x1000 mm 2:1 green termoretract tube
2 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover Black 2 m
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Monokote ROJO misil (1.8x0.65m)
2 x	Oracover Brown 2 m
1 x	1,6x1000 mm 2:1 red termoretract tube
2 x	4,8x1000 mm 2:1 red termoretract tube
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
2 x	2 LiPo XH>EH adapter
1 x	3 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	CC 05
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	JETImodel SINGLE BEC
2 x	CC 01
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Adapter lead MPX/EC3
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Dean "T" - Futaba Adapter
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	CC 03
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	TP/TopFuel - XH 2/3S Adapter
3 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CM-3
1 x	TP/TopFuel - JST-EH 4/5S Adapter
3 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	CC 02
1 x	Cabel charger transmitter GRAUPNER
1 x	Circlick securite
1 x	Digital scale up to 40 kg
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Ball Link Plier
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
2 x	PVC red battery termo-retract 68 mm (10 m)
1 x	PVC transparent battery termo-retract 70 mm (10 m)
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	SIG Coverall 1.2x4.5 m
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Z Bender - S Type Tool
1 x	SIG Coverall 1.2x1.8 m
1 x	Hot Glue Stick RED
2 x	Starter EM Gear Power 80
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Starter 12v (Max 180 and 30ccm)
1 x	2,0x50 mm allen screwdriver
1 x	Copier 5x20 cm pcs
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	SIMtransmitter 6 Mode 2
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	Dust collector for mould cleaning
1 x	SIG Coverall 1.2x0.9 m
1 x	Digital precision scale up to 2000 g
1 x	Screwdriver for Torx® TX8
1 x	Cut tube
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	1,5x50 mm allen screwdriver
1 x	Vacuum pump 12 CFM
1 x
1 x
1 x	2,5x60 mm allen screwdriver
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	GameCommander USB Universal
1 x	Ball Link Plier
2 x	3,0x60 mm allen screwdriver
2 x	Starter EM Gear Power 250
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Starter 12v (Max 90 and 15ccm)
1 x	PVC lilac battery termo-retract 70 mm (10 m)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Horn with ball 40x30
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Small aluminium horn red (2pcs)
1 x	20 mm carbon horn
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Cable with accesories
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 6/20 with M3 Bearing
1 x	Oratex Silver 2m
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Marker ties (20 pcs)
2 x	Oratex Natural White 20m
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	Selfstarr EME35
1 x	Smoke pump RCEXL
1 x	Compact on-board starting system (9512)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	White silicone 0,25 mm² wire (25 m)
2 x	30 cm BEC cable (male)
1 x	Long adjustable aluminium control horn 2,8x24
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
2 x	USB interface ALTIS
1 x	Extension 5 lipos JST/C
1 x	SBEC 40
1 x	Adapter lead MPX/XT60
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	4 LiPo XH>EH adapter
1 x	Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x	PowerBox SparkSwitch RS
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	Sanyo RX Battery Eneloop 6,0 V JR
2 x	30 cm BEC cable (female)
1 x	Magnetic Interruptor MULTIPLEX
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Solvent Plasti Dip 1000 ml
1 x	Partall paste 650 g
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Nitroverdu 500 ml
1 x	800TVL CMOS camera for FPV
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Angle measurer
1 x	Universal Colour Paste deep black 250 g
1 x	resin-hardener package L-385 with hardener H-385
1 x	Long Switch On/Off micro
1 x	PSC 5
1 x	Male Prolonger TP 4/5S
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Blades 330mm
1 x	SPS 70V 140/280 A
1 x	Extension 2/3 lipos JST - JST/C
1 x	MPX-Dean "T" Adapter
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Multi-adapter balancer JST/C - TP
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	SWTU2 switch
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	SPS 70V 100/200 A
1 x	Interruptor SPS 70v 60/120A
1 x	Extension 5 lipos JST/C - JST
1 x	Oracover White 2 m
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	PVC yellow battery termo-retract 69 mm (10 m)
1 x	PROFICOVER 5m
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Ply-Span 450x600/13g Orange
1 x	Oracover CARBON Metalic 1 m
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Sealing Iron Sleeve STD
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Propeller diller for DLE170
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Propadapter for motor A50
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	Motor Mega AC 16/10/03 RACE
1 x	Opto Gas Engine Kill Switch
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	Motor Mega AC 16/25/02
1 x	Motor Mega AC 16/25/06
1 x	DLE 30 complete electronic ignition
1 x	Motor Mega AC 16/15/07

7,468.27EUR