186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Metal ball clevis M3 (10 uds)
1 x Black large kwik link (10 pcs)
2 x Cable coupler M2 (10 uds)
1 x Kwik link with arm M5xM2,5xL30
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x Cable coupler M2x66 (2 uds)
2 x Fully Threaded Steel Rod M2,5 (2 uds)
2 x Kwik link AL M3 con Clip (2 pcs)
2 x Couple M4 for wire (10 pcs)
2 x Crimping sleeves for 1.1 mm cable (10 pcs)
2 x Cable coupler M3 (10 uds)
2 x Brass ball links BS M3 V1 (10 pcs)
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Cable coupler M2 (10 uds)
2 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Kwik link with arm M3xM2xL24
2 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x 4 mm M3 red control terminal (4 pcs)
2 x Cable coupler M3 (10 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
2 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Kwik link AL M4 con Clip (2 pcs)
2 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Angled clevis with threaded rod M3
1 x SE Ring 350 mm (2 pcs)
2 x Foil for sticking flaps and ailerons
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Tape GFK 38 mm
1 x Tape GFK 25 mm
1 x 
2 x Ring 320 mm length (5 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 330 mm (4 pcs)
1 x Cable coupler M2,5 (2 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 20x1000 mm Ring Strap Back To Back
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x SE Ring 360 mm (2 pcs)
2 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Cinta Goldfix 1m
2 x SE Ring 240 mm (2 pcs)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Bungee HLG Premium
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x SE Ring 200 mm (2 pcs)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Marker ties (20 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x wire tensioner (black)
1 x Round Rod 1.0x3.5 cm
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x FOAM - CURE™ (24g)
1 x SE Ring 400 mm (2 pcs)
1 x Tube Pitot to PIXHAWK
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 20x200 mm battery rings
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x BABY glider (Aero-naut)
1 x Glider PIROL
1 x Swift ARF 2000 mm Red (Hacker Model)
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x Antonov AN2 Scale 1/6 - 3m
1 x Pegamento Pu R 50g polyuretano
1 x UHU hart 35 g
1 x Soporte grifo FESTO (2 pcs)
1 x Connectors banna oro 4 mm (M/F)
1 x Recessed MPX connector support (6 pcs)
1 x Support XT60 conector (2 pcs)
1 x Adaptadores carga 6s JST-XH
1 x PIX Hawk with accesories
1 x Sparkplug 1/4-32 EVO 10GX
1 x Propeller APC 10x7 Glow/Gas
1 x Propeller MASTER 7x3
1 x Propeller MASTER 6x3,5
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Sparkplug ROSSI R8
1 x Sparkplug NGK CM6
1 x Sparkplug 1/4-32 Glow
1 x Sparkplug 1/4-32
1 x Spark plug key NGK MVVS
1 x Spark motor OS nº 3
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Propeller MASTER 6x4
1 x Mini neumatic retract landing gear
1 x Electric Fuel Pump 12V
1 x KAVAN Hand crank fuel pump
1 x Hose connector stopper 4 mm
1 x Aluminium ignition bad (red)
1 x Starter EM Gear Power 80
1 x GLOW 5C + accesories
1 x Propeller Pleg CAM Carbon 13x5
1 x Propeller CFK 14x10
1 x Propeller CFK 15x7
1 x Propeller RF CFK 13x6.5
1 x Propeller CFK 11x8
1 x ABS tube 20.0x18.0x1000 mm
1 x Racor 2/3 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x 40 mm air cylinder
1 x Nylon threaded block M4 (2 uds)
1 x Body for landing gear Ø 4 mm
1 x White aluminium 230 mm landing gear
1 x Propeller APC 11x7 Glow/Gas
1 x Vasa model Catapult
1 x Propeller MASTER 7x4
1 x Propeller MASTER AIRSCREW 12x8
1 x Propeller MASTER 5,5x4,5
1 x Propeller MASTER 6x3
1 x Propeller POWER-PROP 12x8
1 x GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x Set montaje amortiguador para modelos 8-16 Kg
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Smoke pump RCEXL
5,563.15EUR
Manufacturers
Languages
Español English
Currencies