186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Turbina KINGTECH K320 G5
2 x Adaptadores carga 6s JST-XH
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Extension MPX-MPX 20 cm
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x SERVO HOLDER
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Plasti Dip Liquid Tape 429 ml orange
2 x Spray YELLOW Inca Lexan 150ml
2 x Spray Graphit 33
2 x Plasti Dip Liquid Tape 429 ml black
1 x Nitroverdu 500 ml
2 x Spray EC Red 400ml
2 x 500 ml sealer (DOPE)
1 x Release wax 250ml
1 x Partall paste 650 g
2 x Spannlack 1000 ml
2 x Paint gun for sprays
1 x Spray adhesive AEROFIX 2
1 x Presto SF Light Filler styrene-free (420 g)
1 x Universal Colour Paste deep black 250 g
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Piloto Jet "Red" 1/6 Scale
1 x ABS I Strip 20x10x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Small aluminium horn gold (2pcs)
1 x RCEXL Electronic ignition twin CM-6
1 x GLOW 2C + accesories
1 x Conector MR-60 (pareja)
1 x DLE 30 complete electronic ignition
1 x Compact on-board starting system (9715)
1 x RCEXL Electronic ignition twin A-02
1 x Ignition bed V2 Red color
1 x 20 g tin paste
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Towing hook
1 x Painting GHT Lexan Black 150 ml
1 x SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x Blade holder upper
1 x Secraft Fuel system v2, red color
1 x Ball joint long
1 x LOWER TOW HOOK
1 x LA500 housing-lower cyclic
1 x Adjustable launching hook
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Servo Fork
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Screws flush mount M2
1 x Motor wall
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Head lower part
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link with arm M5xM2,5xL30
1 x Rotorhead pushrod
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Micro clevis (10 uds)
1 x Baering 3x8x4
1 x Blade holder center GFK 0,5 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Head core bushing
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Small kwik link (10 pcs)
1 x Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Head core
1 x VTX 477 Carbon Rotorblade
1 x 1000 ml sealer (DOPE)
1 x 15 mm floating pad (30 pcs)
1 x 20 mm gas motor standoff
1 x Antenna Hole Cap V1 (Silver)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x 11 mm Rubber pads (14 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Aluminium ignition bad (red)
1 x 20x1000 mm Ring Strap Back To Back
1 x 40 mm gas motor standoff
1 x 15 mm gas motor standoff
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x VBar Control Touch, midnight black
1 x Universal Colour Paste white 50 g
1 x Solvent Plasti Dip 1000 ml
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Adapter lead MPX/EC3
1 x 30 cm MULTIPLEX female connector
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x Motor rotor LA-500
1 x Servo HITEC HS-225 BB
1 x Servo HITEC HS-5085 MG Digi
1 x Servo HITEC HS-5475 HB Digi
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x LA500 rotor head core
1 x LA500 housing-upper cyclic
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Servo FUTABA S 3071 HV S-Bus
1 x Servo FUTABA S 9670 SV
1 x Motor SAITO FG-61 TS
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Futaba 3010 - Gear Set
1 x Universal Colour Paste deep black 50 g
1 x Towing hook <3m
1 x Spinner NUT M5
1 x Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x Spinner NUT M10x1
1 x Spinner NUT M8x1,25
1 x Aluminium ignition bad (blue)
1 x Conector JR Servo male (50 pcs)
1 x SLICK 360-B 104" (2640 mm)
1 x Recess mount-rem. glow plug set
1 x GLOW 9C + accesories
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x 12V Car Adapter
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Extension for SensorSwitch 30cm
1 x ESC MEZON 115 Opto
1 x Pilot LA 500
18,355.42EUR
Manufacturers
Languages
Español English
Currencies