186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x BALSA trip 2.0x2.0x1000 mm
3 x Walnut wood slat 2.0x2.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
3 x Liston HAYA 8 x 8 x 1000 mm
2 x BALSA triangular 15x15x1000 mm
2 x Pine wood slat 2.0x10.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
4 x Motor DLE 430 cc - Paramotors
4 x Motor DLE 200cc Premium Muffler
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
5 x Beech dowels 3.0 x 1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
3 x Motor DLE 170 M- Paramotors
1 x Pine wood slat 1.5x3.0x1000 mm
2 x BALSA trip 10x10x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
3 x Small Crow DLE-170M
3 x Silent-blocks DLE 170M
3 x BALSA triangular 10x10x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
2 x ABS Strip 1.5x8.0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Ferrita 14x8x5.5 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Lock washer 3.2 mm (20 pcs)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Premium servo extension 75cm
1 x Cabel "Y" 15 cm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Birch plywood plate 600x300x2.5 mm
3 x Motor DLE 200cc Std
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Balsa panel 1.0x100x1000 mm
5 x Beech dowels 2.0 x 1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
2 x A/C quality beech plywood 600x300x0.6 mm
2 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x A/C quality beech plywood 600x300x5.0 mm
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x Balsa panel 2.0x100x1000 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Balsa panel 2.5x100x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
2 x BALSA triangular 6x6x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Strip 3,5x1,75x330 mm
4 x Big Crow DLE-170M
3 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Servo BLUE Bird BLS-H71B v2
1 x T-Hose connector 6-6-6 mm
1 x Faucet FESTO
1 x Quick hose connector 4-4 mm
1 x Body for landing gear Ø 4 mm
1 x Air pressure gauge
1 x Wheel collar 2 mm Ø (4 uds)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x LA500 Autogyro
2 x Actuador lineal HLS12-100210-7.4v
1 x Servo BLS-M55B 61.2kg
1 x Brass rod Ø 0.8 mm x 1000 mm
2 x Brass rod Ø 1.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
2 x Motor OS 3820-1200 electric
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
4 x Flap hinge 33x9 mm (6 pcs)
3 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Landing gear strap large (4 uds)
1 x T-Hose connector 2-2-2 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
3 x Flap hinge (6 pcs)
4 x Decorative caps, multicoloured, short
2 x Conector JAPAN G2 Set 5 pares
1 x Quick hose connector 3-3 mm
1 x Canopy Latch
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber rod 5.0 mmx1000 mm
5 x Beech dowels 4.0 x 1000 mm
1 x Foam plastic plates (310x210x3 mm)
1 x Contest-S-Pult-Carbon mc-20/mc-24
4 x Coupling bush 5 - 5 mm
2 x 28 mm tailwheel unit
3 x Foreman, scale 1:32
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Distanzstück motor OS 120 AX
2 x Adjustable brass horn threaded M3
1 x Foam plastic plates (310x210x8 mm)
1 x Bearing block for noseleg landing gear
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver
1 x Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x 
1 x Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x FIALA Propeller 19x12 Electric
1 x Extension silicon 100 cm (Graupner)
1 x Antonov AN2 Scale 1/6 - 3m
1 x 22x10 prop Super Silence
1 x 3-blades 30x12 carbon prop Super Silence
1 x 20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 15 cm PTFE-tubing for 25 mm tubes
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Sparkplug ROSSI R8
2 x Spinner fixed propeller 60 mm / 5,0 mm
2 x Receiver Crystal 35 Mc/s Ch 62
3 x Hose clips 6 mm
1 x Quick hose connector 6-4 mm
2 x MZ-12, 6 Channel HoTT
1 x EME 55 cc carburetor WALBRO
1 x Sparkplug 1/4-32
1 x Sparkplug 1/4-32 EVO 10GX
1 x Spark motor OS nº 8
1 x 12V Car Adapter
1 x UHU hart 35 g
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Receiver replacement antenna, approx. 15
2 x Spikes Band (5 m)
1 x MZ-18, 9 Channel HoTT
3 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Sparkplug DLE CM6
1 x Sparkplug Saito 400
1 x Spark motor OS nº 3
1 x Charger 220/110v
3 x Aluminium sheet 500x250x0,5mm
2 x Transmitter Crystal 35 Mc/s Ch 77
2 x Foam plastic plates (310x210x2 mm)
1 x Propeller hub spacer 8/5.5
2 x POLARON EX 800w charger
1 x MZ-10, 5 Channel HoTT
1 x Decorative caps, multicoloured
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Mini Infrared Thermomiter
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Charger LiPo Charger4
1 x Receiver replacement antenna, approx. 85
1 x Propeller Pleg CAM-Prop 8x6
1 x Suction funnel for carburetor 90D-L (red)
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Extension Arm for Carburetor (red)
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Variable Flow Smoke Pump System
53,507.82EUR
Manufacturers
Languages
Español English
Currencies