Top » Catalog » Acces. for Motors » Fuel/Smoke Pumps » POWER8015

186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

under request

Reviews

Quick Find

Shopping Cart

2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	CC 01
1 x	Double conector with JR adapter and 200 mm extension
1 x	CC 03
1 x	Dean "T" - Futaba Adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Circlick securite
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	30 cm BEC cable (male)
1 x	4 LiPo XH>EH adapter
1 x	UBEC 6A KAVAN
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Connector Sub-D 2+5 Female
1 x	5 LiPo XH>EH adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 05
1 x	CM-3
1 x	2 LiPo XH>EH adapter
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Cabling for Fox MDM1 wings
1 x	3 LiPo XH>EH adapter
1 x	30 cm BEC cable (female)
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Futaba male 40 cm extension
2 x	Extension PVC 150 cm (Graupner)
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 30 cm male (Futaba)
2 x	Extension 7.5 cm
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension 30 cm (Futaba)
2 x	Extension 15 cm (Futaba)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
2 x	Lock washer 2.2 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Quicklock washer 4 mm (10 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
2 x	Lock washer 4.3 mm (20 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Slave-cable USB Easy Sim
1 x	Xplorer4 anemometro
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	PSC 6
1 x	Medidor ángulos y/o incidencias
1 x	Support pump Xicoy X45
1 x	"Taxi Tank" Fuel Tank
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 02
1 x	Electric Fuel pump
1 x	PowerBox Smokepump
1 x	Starter EM Gear Power 250
1 x	Compact on-board starting system (9724)
1 x	Starter EM Gear Power 80
1 x	Propeller diller for DLE111 and DA85-150
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Premium servo extension 50cm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Hovercraft sailcloth
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension 90 cm (Futaba)
1 x	Extension 100 cm (Futaba)
1 x	Extension silicon 75 cm (Futaba)
1 x	Servo NARO Max Std
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Blind nut M3 (4 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Nylon Screw M4x20
1 x	Nut for mounting M3 (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
2 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Lock nut M2 (20 pcs)
1 x	9x4.7 * 22x12 carbon propeller
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Lock nut M3 (10 pcs)
1 x	Canopy Latch
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Nut for mounting M6 (4 pcs)
1 x	Blind nut M4 (10 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Nylon Screw M6x40
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Lock nut aluminium M2 (4 pcs)
1 x	Lock nut M2 (10 pcs)
1 x	Blind nut M5 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	M3 black washers (4 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	JM electric Pump
1 x	Secraft Fuel system v2, red color
1 x	RCEXL Electronic ignition twin A-02
1 x	Recess mount-rem. glow plug set

2,306.63EUR