186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Parachute BACKUP X100
2 x Trike XL motor set (motor+esc+prop)
2 x Set cintas unión paracaídas 145 cm
1 x Wing OXY 0,5 pulgadas2
2 x Aramid 50 daN 50 m
1 x MAX pilot ARTF
2 x Rescue 1,8m2 / BackPack
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Ballast 700gr OPALE
1 x Paramotor BackPack XXS (without accessories)
1 x Windsock Ozone L - 700 mm
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor BackPack XXS 2
1 x Para-RC Mix
1 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "Garry"
1 x Civilian pilot "Curt" size 9cm (Slimline)
2 x 1/6 Pilot "John"
2 x Pilot JAN 1/4 Saiplanes
1 x Civilian pilot "Pamela" size 9cm (Slimline)
2 x Piloto jet 130 mm
1 x 1/6 Pilot "Cindy"
1 x 1/10 Pilot "Jimmy"
1 x 1/4 Pilot "Heidi"
1 x Pilot "Adolf" Legends Series (Slimline)
2 x Piloto Jet "Green" 1/6 Scale
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/7 Pilot "Japanese"
1 x Small aluminium horn blue (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 5/10 with M2 Bearing
1 x Cable control set
1 x Brass control horn M3 short for wire (2 pcs)
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Z Bender - S Type Tool
1 x Digital precision scale up to 2000 g
1 x Starter Sullivan-STAR 603 DINATRON
1 x Vacuum pump P1-N
1 x Cut tube
1 x Hexagonal ball head 2.0 x 50 mm
1 x Hot Glue Stick BLACK
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x Starter EM Gear Power 250
2 x 
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x M3 black washers (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
2 x Lock washer 2.7 mm (20 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Flat washer 2.2 mm (20 pcs)
2 x Flat washer 2.7 mm (20 uds)pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Premium servo extension 50cm
1 x Slave-cable USB Easy Sim
1 x Quick hose connector 3-3 mm
1 x Fiberglass landing gear for 140-160
1 x Fail Safe air retract
1 x Landing gear strap small (4 uds)
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Nylon gear block Ø 6 mm (2 uds)
1 x Landing gear strap large (4 uds)
1 x Brake for 140 mm wheels
1 x Paramotor Trike XL
1 x Windsock Ozone L -1200 mm
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Extra long horn 60x30
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x 1/4 Pilot "Mike"
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Pilot "Dick" Legends Series (Slimline)
1 x 5 mm M2 variable inclined horn
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Pilot "Anthony" (Slimline)
1 x Wing OXY 5,0 m2
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Welder 100W/200V
1 x Precision wrench L100 mm
1 x Concave-Convex sandpaper file 13 mm
1 x Alu servo arm double RHINO
2 x Fresa corte diamante Ø 2.3mm (bola)
1 x Servo arms set HS-65HB/MG/5065MG
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
2 x 22 mm Cut Disc Proxxon/Dremmel
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Steel brush wheel with 2.35mm
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x "L" servo arm 65x49 mm (2 pcs)
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Tube bender
1 x Crimping tool
1 x Tachometer Hyperion Multi-pala
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Schul-Malpinsel Gr.5
1 x Z-shaped servo mount
1 x Sandpaper file 13 mm
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x 10-15mm Servo Arm HITEC
2 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x Servo TT ACE SHV 1504 MG
1 x Servo holder for retract
1 x Sealing Iron STANDARD
1 x Dust collector for mould cleaning
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Tube Pitot to PIXHAWK
1 x Sealing Iron Sleeve STD
1 x Screwdriver for Hexagon 1,5mm
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x 3,0x60 mm allen screwdriver
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Sealing Iron Sleeve PROF
1 x Servo Tester
1 x 2,5x60 mm allen screwdriver
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Red aluminium servo arm V1-Futaba 20 mm M2
1 x Goma arrancador Ø36 mm x 30 mm
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Blue aluminium double servo arm HITEC 2,5 inch M3
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Vacuum pump 12 CFM
1 x USB programador GO servos
1 x Socket Screw M3x9 mm
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x GPS Altis
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Futaba 3010 - Gear Set
1 x Screw M2.5x10 (10 pcs)
1 x Blind nut M4 (10 pcs)
1 x Hexagonal Nut M4 (20 pcs)
1 x Telemetry interface ALTIS to Futaba
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x PowerBox Smokepump
9,219.28EUR
Manufacturers
Languages
Español English
Currencies