Top » Catalog » Acces. for Motors » Fuel/Smoke Pumps » POWER8015

186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

under request

Reviews

Quick Find

Shopping Cart

1 x	Paramotor Kit Camo H1.5/ Ben Red
2 x	Paramotor BackPack XXS 2
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Paramotor BackPack XXS (without accessories)
1 x	Windsock Ozone L -1200 mm
1 x	Wing OXY 0,5 pulgadas2
2 x	Para-RC Mix
1 x	Windsock Ozone L - 700 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Liferaft 47 mm
1 x	MG cannon 1.8 cm (5 pcs)
2 x	Bandera Frankr 4x6
1 x	Antenna 50 mm (2 uds)
1 x	ALMIRALSANKER anchor 40 mm (2 uds)
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x	Anchor of tow Met. 60 mm
1 x	Railing L250 mm (10 pcs)
1 x	Ancla 16 mm (2 pcs)
1 x	Ancla Admiralsanker 60 mm (2pcs)
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Tirpiz Battleship 1:200
2 x	Coupling bush 5 - 5 mm
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	SCHARNHORST Battleship 1:200
1 x	Ancla Met. 16 mm (5 pcs)
1 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	Mounting base Ms 8 mm
1 x	Ancla Hist. 67 mm (2 uds)
1 x	75 mm
1 x	Anchor 25 mm (2 uds)
1 x	Mounting base Ms 12 mm
1 x	SC NAVY V15R
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Rescue 1,8m2 / BackPack
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Fox 4000 mm (Airwold)
1 x	Fox MDM 1 6000 mm
2 x	Motor 2212 (1000KV) Quadcopter F450
1 x	LO 100 ARC 3.3m
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	LS-8 GFK 6m Glider
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Fox 4000 mm with flaps (Airwold)
1 x	X-RAY Micro QR (Rudder)
1 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	ASK 21 6.5m + pylona
1 x	Kobuz 5000 mm (Airwold)
1 x	LO 100 ARC 3.3m,frame canopy
1 x	Chili Race F3K (aramid nose)
1 x	FESTO connector M7 Quick 6 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Check valve quick hose connector 4-4 mm
1 x	Fuel Fittings-Red
1 x	SAITO FG-36 carburetor
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Suction funnel for carburetor 90D-L (red)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Extension Arm for Carburetor
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x	Propeller diller for EME35 and DLE35
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Housing Ø 4 mm (2 pcs)
1 x	3 mm Leader (L 100 mm)
1 x	Feedthroughs 4 mm
1 x	1/4 Pilot "Mike"
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück
1 x	Ply-Span 450x600/13g Blue
1 x	Digital precision scale up to 2000 g
1 x	30 cm DEANS female connector
1 x	Futaba Female 40 cm extension
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller)
1 x	Optotronix Aurora Plug
1 x	FESTO connector M7 barb fitting 4mm
1 x	Quick hose connector 3-3 mm
1 x	Sheave Pl. 2R. 3 mm
1 x	Coupling for 3,2 mm axis
1 x	XH male balance (3S) connector (2 pcs)
1 x	Extension 30 cm (Futaba)
1 x	500 ccm gasoline fuel tank
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Cockpit plastic closing
1 x	PowerBox Smokepump
1 x	Bungee HLG Premium
1 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Recessed MPX connector support (6 pcs)
1 x	Angle support XT60 conector
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Albatros ,spare cockpit (Top Model)
1 x	Electric spoiler 300 mm (2 pcs)
1 x	Astra wing Joinner (Top Model)
1 x	Swift 5050 mm (Airwold)
1 x	Mini Infrared Thermomiter
1 x	Adjustable brass horn threaded M3
1 x	Rudder 2_Tray 4.5~5 inch
1 x	Bateria DJI Mini 2 2250 mAh
1 x	Propeller VESS 27A
1 x	Ojos de buey 13x9x6 mm (20 pcs)
1 x	EasyFLY Addon
1 x	3 mm Prop Adapter M6
1 x	ORACOVER Ferrari red (2 m)
1 x	Coupling for 4 mm axis
1 x	XH female balance (7S) connector (2 pcs)
1 x	Propeller 3BL 35 mm M4 plastic Left
1 x	Bocina 30 mm (1 pcs)
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Antiaircraft gun 3.7 cm (5 pcs)
1 x	Oracover Brown 2 m
1 x	Life guard Ø 35,0 mm (2 pcs)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Distanzstück motor OS 120 AX
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support ECU Xicoy X-45
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Servo HITEC D941 TW
1 x	Servo SAVOX SV-1270 TG
1 x	Servo HITEC HS-225 BB
1 x	Servo HITEC HS-5585MH
1 x	Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x	Gear set HITEC D645 MW
1 x	LO 100 ARC 3.3m,cabina
1 x	Gear set HITEC HS-311/322/325BB
1 x	Savox Brushless Servo SB-2271SG
1 x	SAGITA Alsema 4.0 m
1 x	Servo HITEC D145 SW
1 x	Swift S1 De-luxe 3.730 mm
1 x	Gear set HITEC HS-56 HB
1 x	SHK 4000 mm Scale 1:4.25, V-Tails
1 x	Servo Digital HITEC HS-5065 MG
1 x	Para-RC Trike "RC-Bullix"
1 x	50 mm servo arm with bearing (2 pcs)
1 x	Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x	POLARON EX 800w charger
1 x	Hose clips 6 mm
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	SZD-56 Diana-2 Carbon D-box wing
1 x	Ventus 2cx 4.5 m Canopy
1 x	Red aluminium servo arm V2-Futaba 2,0 inch
1 x	Propeller APC 14x6 Glow/Gas
1 x	Red aluminium servo arm V3-Futaba 3-3,5inch
1 x	Propeller APC 11x5 Glow/Gas
1 x	Red aluminium servo arm V2-Futaba 1,5" inch M3
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	Vess propeller 12x7 S
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	DPSI magnetic switch actuator (PCB)
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	10 mm portholes (10 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Welder 100W/200V
1 x	Motor OS MAX 120 AX
1 x	Optotronix X-Carrier
1 x	Propeller KAVAN 32x12 2-Bl
1 x	Life guard Ø 25,0 mm (2 pcs)
1 x	Propeller FIALA 15x8 3-Blade
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Pile railing 2D/16 mm (10 pcs)
1 x	Ringöse 12 mm (50 pcs)
1 x	Joint for loading boom 2 pairs, 10 x 5 mm
1 x	Koffeenagel Holz hell 8 mm (20 pcs)
1 x	XH male balance (6S) connector (2 pcs)
1 x	4 mm Prop Adapter M6
1 x	12.7 mm 2:1 black termoretract tube
1 x	Housing Ø 6 mm (20 pcs)
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Picas 12 mm (20 pcs)
1 x	PowerFuel RX V2 Fuel Pump
1 x	Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück
1 x	6 mm Prop Adapter M8
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Cabestrante 13 x12 mm (5 pcs)
1 x	Oracover Black 10 m
1 x	Propeller 3BL 30 mm M4 plastic Left
1 x	Top light 6mm/3V Red (2 pcs)
1 x	Oracover Black 2 m
1 x	Life guard Ø 8 mm (24 pcs)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Red 4 mm connector holder
1 x	G-Ring Ø3mm Ø3xØ6x3 mm
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White

27,327.05EUR