186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x METEOR 1.000 mm kit
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x L-39 Albatros 138"/3.5m lenght ARF
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Extension lead 15 cm Multiplex
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Ferrita con funda
1 x Tape GFK 38 mm
1 x SE Ring 360 mm (2 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Extension silicon 30 cm male (Futaba)
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x RF9 Flight Simulator with Spektrum Controller
1 x Extension silicon 100 cm (Graupner)
1 x Flat Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Profile ABS Square 3 x 1000 mm
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Ball link Aluminio M3 (2 pcs)
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Small aluminium horn blue (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Bateria DJI Mini 2 2250 mAh
1 x Small aluminium horn gold (2pcs)
1 x 20 mm carbon horn
1 x Tube Pitot to PIXHAWK
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Threaded coupler M3 (10 uds)
1 x Horn for flap control (1 pcs)
1 x Horn with ball 55x40
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x 6 mm aluminium horn with patella
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x PPM Encoder Module
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn 6/27 with M3 Bearing
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x PT 16x10 E Propeller
1 x PT 21x13 EL Propeller
1 x Propeller 11x4,7 SlowFlyer
1 x Propeller 9x4,7 SlowFlyer
1 x Propeller 3x3
1 x Propeller 3x2
1 x Propeller 10x4,7 SlowFlyer
1 x Propeller 9x7 SlowFlyer
1 x Propeller 8x4 Electric
1 x Premium servo extension 25cm
1 x Extension 100 cm (Futaba)
1 x Extension 7.5 cm
1 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 25 cm (Futaba)
1 x Extension silicon 50 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x ARS 300 91" ARF 2311mm ORANGE
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x TS832 to Gopro AV/Power Cable
1 x Turnbuckle M1,6x17/27 (2pcs)
1 x Wire easy tensioner (silver)
1 x Electron 22 mm Fitting barb
1 x Double side nipple
1 x 
1 x Hose clips 6 mm
1 x Extra hard 1500 ccm complete gasoline fuel tank
1 x SAITO FG-36 carburetor
1 x Motor Advance 30-10 F3A
1 x FOXY G2 C3530-700
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Indoor hinge with servo arm integraded
1 x Long adjustable control horn with bearing
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Rudder forward 90x28 "type Kato"
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Stickers-digit for marking
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x DPSI RV Mini 5 Magic
1 x Propeller VESS 27A
1 x FIALA Propeller 18x8
1 x FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS)
1 x FIALA Propeller 24x8
1 x EDGE 540-A 74" (1880 mm)
1 x 500 ccm gasoline fuel tank
1 x 550 cc gasoline fuel tank complet
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x Check valve V2
1 x "Taxi Tank" Fuel Tank
1 x Deposito combustible tipo "turbina" 330 ml
12,742.56EUR
Manufacturers
Languages
Español English
Currencies