186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Support conector MPX (6 pcs)
1 x Support Pitot JETI
1 x 42 mm white plastic spinner for fixed propeller
1 x Spinner plastic white fixed propeller 42 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x 6 mm Quick clamp_S (10 pcs)
1 x Angle support XT60 conector
1 x MYLAR film A350 (1000x500 mm)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x Truck-trailer for gliders 720 x 239 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Allen wheel collar M4x4
1 x 37 mm PVC transparent battery termo-retract (1 m)
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x 5 line servos wire black (1 m)
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Propeller balancer
1 x Foam plastic plates (310x210x5 mm)
1 x Bearing block for noseleg landing gear
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x 90 mm rods + T patellas set for direction control
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Flap hinge (6 pcs)
1 x Distanzstück motor OS 120 AX
1 x Spinner plastic red fixed propeller 30 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Decorative caps, multicoloured, short
1 x Green silicone 0,25 mm² wire (25 m)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Flap hinge 33x9 mm (6 pcs)
1 x Oracover Azul Cielo 2 m
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Clip fixing for wing (2 pcs)
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Allen wheel collar M3x5
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Field folding model stand SebArt
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Support Flush MPX Conector (6 pcs)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x 36 mm black plastic spinner for fixed propeller
1 x Cable set Premium™ MAXI "one4two"
1 x 50m servo "Premium" wire (white/red/blue)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x PPM Encoder Module
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Buy Perforated film 100 cm / 50 m
1 x Blue silicone 0,5 qmm wire (50 m)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x 38x4,5 mm wires output (2 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Medidor ángulos y/o incidencias
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Allen wheel collar M3x3
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Conector XT-30 (hembra)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 30 cm DEANS female connector
1 x Dean "T" - Futaba Adapter
1 x Double conector with JR adapter and 200 mm extension
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x F3A carbon 85 mm spinner for AXI
1 x Spinner INO 89 mm Chrome (Imitacion metal)
1 x DPS Switch JR/JR
1 x Conector MR-60 (pareja)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Adapter lead MPX/EC3
1 x Conector JR Servo female (10 pcs)
1 x Connectors banna oro 4 mm (M/F)
1 x Spinner 42 mm EXTRA 330SC
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x Connectors banna oro 3,5 mm (M/F)
1 x CC 05
1 x Cabling for Fox MDM1 wings
1 x 20x1000 mm Ring Strap Back To Back
1 x Connectors banna oro 0,8 mm (M/F)
1 x Deposito combustible tipo "turbina" 330 ml
1 x 18m Fitting barb
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Electron 22 mm Fitting barb
1 x Sparkplug ROSSI R8
1 x Deposito DUBRO 360 ml - 12 oz
1 x Electromotor starter EME 35cc
1 x DLE Ignition unit
1 x Compact on-board starting system (9713)
1 x 550 cc gasoline fuel tank complet
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Secraft Fuel system v2, red color
1 x 
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
2,348.52EUR
Manufacturers
Languages
Español English
Currencies