186.00EUR

Bomba de humo JETs PowerBox 2 salidas
[POWER8015]


Bomba de humo JETs PowerBox 2 salidas
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Funda hélices 16-20" (1 pcs)
1 x Hélice MEJZLIK 20x13 Electric light (41 g)
1 x Hélice MEJZLIK 20x10 Electric light (36 g)
1 x Funda hélices 16-20" (2 pcs)
1 x Alicate para hacer "Z"
1 x Banda lijado g. 80 para BSL 220/E (5 pcs)
2 x Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x Barra pegamento caliente Negro
1 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x Arrancador Sullivan-STAR 601
1 x Alicate para "Ball-Link"
1 x Barra pegamento caliente Verde
1 x Copiador 2 unidades de 20 cm
1 x Bomba de vacio 12 CFM completa
1 x Crimpadora
1 x Destornillador allen 2,5x60 mm molibdeno
1 x Bascular < 40 Kg
1 x Arrancador Sullivan-STAR 603 DINATRON
1 x Acumulador polvo para limpieza moldes
1 x Bascula precision 0.1-2000 g
1 x Bomba de vacio P1-N
1 x Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x Arrancador EM Gear Power 250
1 x Destornillador Torx® TX6
1 x Conector "T" 6-6-6 mm tubo bomba vacio
1 x Destornillador Allen 1.5 mm
1 x Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x Alicate para hacer "Z"
1 x Crimpadora
1 x Barra pegamento caliente Rojo
1 x Destornillador allen "Hex" Ø 2.0 molibdeno
2 x Varilla latón Ø 1,0 mm x 1000 mm
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla Aluminio Ø 4,0 mm x 3000 mm
3 x Varilla acero roscada M3 -1m
1 x Varilla acero Ø 1,0 mm x 1000 mm
2 x Varilla acero Ø 8,0 mm x 1000 mm
2 x Varilla acero Ø 2,0 mm x 1000 mm
2 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Varilla acero Ø 3,0 mm x 1000 mm
2 x Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x Gorra Jeti Negra
1 x Cartucho de humo Rojo 140 g
1 x PCARD sistema wireless
1 x Iniciadores para AX-60 (5 pcs)
1 x Cartucho de humo Verde 140 g
1 x Cartucho de humo Amarillo 140 g
1 x Cartucho de humo Azul 140 g
1 x Soporte ventral para AX-18/AX-60
1 x Arandela 4.3 mm (20 pcs)
1 x Fibra carbono tela 160g/m2 127 cm x 1 m
1 x Arandela conica ancha alumino M3 oro (4 pcs)
1 x Arandela conica alumino M3 rojo (8 pcs)
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Arandela conica ancha alumino M4 Negro (4 pcs)
1 x Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x Arandela abierta 4.1 mm (20 pcs)
1 x Arandela 3.2 mm (20 pcs)
1 x Fibra carbono tela 160g/m2 100 cm x 3 m
1 x Bolsa vacio 1200 mm x 50 m
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x Arandela dentada 3.2 mm (20 pcs)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m
1 x Arandela 2.7 mm (20 pcs)
1 x Arandela conica ancha alumino M3 azul (4 pcs)
1 x Circlick para eje 1.9 mm (10 pcs)
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x Arandela abierta 2.6 mm (20 pcs)
1 x Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x Fibra carbono tela 160g/m2 100 cm x 5 m
1 x Circlick para eje 1.5 mm (10 pcs)
2 x Arandela 1.7 mm (20 pcs)
1 x Arandela dentada 2.7 mm (20 pcs)
1 x Helice PT 21x13 EL
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Hélice Falcon 21x14 eléctrica en carbono (64 g)
1 x Anillo espaciador para hélice graupner 8/5.5 mm
1 x Hélice Falcon 20x13 eléctrica en carbono (64g)
1 x Hélice Falcon 20x15 eléctrica V2
1 x Hélice Falcon 12x6 eléctrica
1 x Hélice Falcon Tripala 19.5x13 V2 eléctrica en carbono (54g)
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x Horn aluminio negro LH largo L31xH30 (2pcs)
1 x Cable acero trenzado Ø 0,62 mm (10 m)
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Oracover Gris Seafire Sea 2m
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Tubo ABS 7,0x5,0x1000 mm
1 x Tubo ABS 12,0x10,0x1000 mm
1 x Tubo ABS 5,0x3,0x1000 mm
2 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
2 x Varilla silverlot 45% - 1,50x500 mm (2 pcs)
2 x Funda plancha entelar PROF
1 x Soporte bomba/flitro Xicoy X45
1 x Soporte Antena 2.4 Ghz (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Roller cutter 28 mm, cuchilla recambio (2 pcs)
2 x Varilla acero Ø 7,0 mm x 1000 mm
1 x Arrancador EM Gear Power 80
1 x Varilla acero Ø 1,5 mm x 1000 mm
1 x Lija con papel de 13 mm
1 x Varilla acero Ø 5,0 mm x 1000 mm
2 x Varilla acero Ø 2,5 mm x 1000 mm
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Varilla acero Ø 1,2 mm x 1500 mm
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Varilla acero Ø 5,5 mm x 1000 mm
1 x Varilla acero Ø 4,0 mm x 1000 mm
1 x Pegatinas Cierva C30 versión española
1 x Set asiento-piloto LA500
1 x Parte inferior del rotor Nueva
1 x Tuerca M2
1 x Hub corona pre-rotación LA500
1 x Tuerca para asegurar tornillos M2
1 x Destornillador allen 3,0x60 mm molibdeno
1 x Servo Fork
1 x Rodamiento 3x8x4
1 x Palanca del cíclico LA500
1 x Tren de aterrizaje completo
1 x Destornillador allen 1,5x50 mm molibdeno
1 x Manta bolsa de vacio 300 gr/m2 Bobina 1m
1 x Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 10m
1 x Repelente agent PVA 250 ml
1 x Arandela M3 negra (4 pcs)
1 x Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x Tornillo Servos M4x5/8 aluminio anodizado rojo (4 pcs)
1 x Tuerca para montaje M5 (4 pcs)
1 x Tuerca autoblocante M2 aluminio azul (4 pcs)
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Arandela abierta 2.1 mm (20 pcs)
1 x Arandela de bloqueo 2.5 mm (10 pcs)
1 x Círculo autoadhesivo 15 mm (30 pcs)
1 x Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x Arandela conica ancha alumino M3 rojo (4 pcs)
1 x Plancha de goma espuma (310x210x3 mm)
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x Bomba combustible manual gas/glow
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Bomba Combustible RX V2
1 x Escape Pitts en kit para CAP 21
6,855.08EUR
Fabricantes
Información del Fabricante
PowerBox Systems
PowerBox Systems Página Principal
Otros productos
Idiomas
Español English
Monedas