Top » Catalog » Acces. for Motors » Fuel/Smoke Pumps » POWER8015

186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

under request

Reviews

Quick Find

Shopping Cart

2 x	Tube Pitot to PIXHAWK
1 x	PIX Hawk with accesories
2 x	PPM Encoder Module
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Cockpit plastic closing
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Long pinned hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	25 mm reinforced hinge
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Small pinned hinge (12 uds)
2 x	15 mm reinforced hinge
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Large flex hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Connector CAN 15
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Support Filtro FESTO
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Allen wheel collar M4x4
1 x	45 mm rods set for direction control
1 x	Angle support XT60 conector
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	18 mm reinforced hinge
2 x	Small flex hinge (12 uds)
1 x	Spark plug key NGK MVVS
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	Miniature brass strap hinge, 1 m
1 x	Medium pin type hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Sparkplug NGK CM6
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Spark motor OS nº 3
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Z Bender - S Type Tool
1 x	Hot Glue Stick RED
1 x	Propeller diller for EME35 and DLE35
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	DLA 116 crankshaft
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Oil FUCHS 1 liter
1 x	Pin hinge 39x20 mm (10 uds)

1,337.22EUR