Top » Catalog » Acces. for Motors » Starters/CDi » SETOKW

16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]

This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spark motor OS nº 3

temporarily out of stock

Quick Find

Shopping Cart

1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Ballast 700gr OPALE
1 x	LUCAS pilot ARTF
1 x	Propadapter for motor A50
1 x	Filler Gauges
1 x	Selfstarr EME35
1 x	Compact on-board starting system (9713)
1 x	RCEXL Electronic ignition twin A-02
2 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	DLE 30 complete electronic ignition
1 x	Set stickers JEEMO "Andy"
1 x	Propeller POWER-PROP 7x7
2 x	Electric spoiler 440 mm (2 pcs)
1 x	SkyMaxx 1.550 mm (kit)
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	E-FUN BUG (ROI-Import)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 38 mm
2 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Compact on-board starting system (9724)
1 x	O-ring Saito FG-73 5cyl
2 x	Spring Clip Ø25 mm
1 x	Compact on-board starting system (9512)
1 x	Ignition bed V2 Red color
1 x	Aluminium ignition bad (red)
1 x	Opto Gas Engine Kill Switch
1 x	RCEXL Electronic ignition twin CM-6
1 x	Ring 320 mm length (5 pcs)
1 x	Compact on-board starting system (9525)
1 x	Retract undercarriage for gliders up to 3,5 Kg
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	Sprung retractable undercarriage (Alfa model)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
2 x	Retract undercarriage
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
2 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
2 x	FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent)
1 x	Spring clamp for tube Ø50 mm
1 x	Distanzstück motor OS 120 AX
1 x	Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
2 x	Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Pitts Muffler kit for CAP 21
1 x	Giant Scale Muffler D.A. 70
1 x	11 mm wing servo holder
1 x	Turbine RABBIT 100 SE 11 Kg
1 x	Turbo Prop KS
2 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Skyray (RBC Kits)
2 x	Canopy Sweet / Siesta
1 x	Electric spoiler 185 mm (2 pcs)
1 x	Avia spare fouselage CF reinforced (Top Model)
2 x	Electric spoiler 250 mm (2 pcs)
1 x	Pilatus PC-21 50E RED/WHITE (SebArt)
1 x	13 mm wing servo holder
1 x	X-RAY Micro QR
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Cap Hispano Aviación
1 x	Turbina DRAGON 30 Kg
1 x	Turbine CHEETAH 160 SE
1 x	Turbine MAMMOTH 25.4 Kg
1 x	Turbine HORNET 85 SE
1 x	Aluminium ignition bad (blue)
1 x	FIALA Propeller 24x12
1 x	FIALA Propeller 24x10
1 x	FALCON 27X11 CARBON PROPELLER (GAS)
1 x	DORNIER DO 335 EP ARF 1724 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 360 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 25 mm
1 x	20x200 mm battery rings
1 x	Xoar Electric Beechwood Prop 20x10
1 x	DLE 85 Ignition unit
1 x
1 x	ER40eVo set B (20 Kg)
1 x	Canister combo DLE 111 cc
1 x	Escape DLE-60 Dcha
1 x	KIRA 600-24 6,7:1
1 x	KIRA 480-38 5,2:1
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	JP Hobby ER-120 Tricycle Full Set with Brakes (JSM Xcalibur Ripm
1 x	Brake disc Electron Retracts
1 x	Canister combo DLE 170 cc
1 x	Muffler DLE 20
1 x	PC-21 2.880 mm SINGAPUR scheme
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Kontronik ProgUnit
1 x	BEC extension JIVE
1 x	Adapter SPEED 480 whit axle short
1 x	PYRO 600-12
1 x	KIRA 480-43 5,2:1
1 x	KIRA 500-26 6,7:1
1 x	KIRA 500-36 6,7:1
1 x	Xoar Electric Beechwood Prop 15x8

34,247.85EUR