Top » Catalog » Acces. for Motors » Starters/CDi » SETOKW

16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]

This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spark motor OS nº 3

temporarily out of stock

Quick Find

Shopping Cart

1 x	Servo NARO Max Std
1 x	HITEC Power Supply 30A. Max. 540w
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Hovercraft sailcloth
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x
2 x	Power supply NT 40 Amp.
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	eFuel 30A Power Supply
1 x	Power supply NT 25 Amp.
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Vasa model Catapult
2 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Cable Cargador FUTABA
1 x	5 line servos wire black (1 m)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
2 x	100m servo "Premium" wire (white/red/blue)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
2 x	25 mm reinforced hinge
1 x	18 mm reinforced hinge
1 x	Gates hinge aluminium (1 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Miniature brass strap hinge, 1 m
3 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Oracover CARBON Metalic 1 m
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pilot "Anthony" (Slimline)
1 x	Profile ABS Square 1 x 1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Long ball link M3 (6 uds)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Xplorer3 anemometro
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Quick hose connector 4-3 mm
1 x	Check valve quick hose connector 4-4 mm
1 x	1000 ccm gasoline fuel tank
1 x	Fuel tank 500ml (17oz)
1 x	T- Fittings red color (2pcs)
1 x	Starter EM Gear Power 250
1 x	Quick hose connector 4-4 mm
1 x	Quick hose connector 6-6 mm
1 x	T-Hose connector 4-4-4mm
1 x	Compact on-board starting system (9724)
1 x	Fuel Fittings-Gold
2 x	FESTO connector M7 barb fitting 4mm
1 x	Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x	Support 45% Hopper JetsMunt
2 x	T-Hose connector 3-3-3 mm
1 x	Quick hose connector 3-3 mm
1 x	Aluminium ignition bad (red)
1 x	Starter EM Gear Power 80
1 x	Compact on-board starting system (9525)
1 x	Compact on-board starting system (9715)
1 x	Extra hard 1500 ccm complete gasoline fuel tank
2 x	280 cc gasoline fuel tank complet
1 x	FESTO connector M7 Quick 4 mm
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Glases Nimbus "Black"
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Glases Moritz
1 x	Paramotor BackPack XXS (without accessories)
1 x	Windsock Ozone L -1200 mm
1 x	Windsock Ozone L - 700 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Gates hinge
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Landing gear Rocket 400
2 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x	Battery charging cable XT60
1 x	A50 Backmountset complete V3/V4
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Bearings for motors hacker A50
1 x	A50 Motor Mount Alu complete set
1 x	A50 Backmountset complete
1 x	A30-M/L/XL Backmountset complete
1 x	A60-6XS V4 28-Pole
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	A60 Motor Mount Alu complete set
1 x	A50 Backmountset complete
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Cable set PREMIUM, fuselage/wing
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Hopper 125 ml XICOY
1 x	Simple take for fuel tank
1 x	FuelTank Cap (blue)
1 x	22m Fitting barb
1 x	Deposito DUBRO 360 ml - 12 oz
1 x	OS Engine 105HZ-R Heli with pipe 105
1 x	Motor OS 50 SX-Hyper
1 x	PHASOR RACE 2035/4100 1D
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Blue Aluminium lock nut M4 (4 pcs)
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Ferrita 14x8x5.5 mm
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Gear set HITEC HS-56 HB
1 x	Long pinned hinge (6 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	FESTO connector M7 Quick 4mm 90º
1 x	Refueling Cap V3 (RED)
1 x	"Taxi Tank" Fuel Tank
1 x	Tygon tube 6.35 x 3.18 mm 15 m
1 x	500 ccm gasoline fuel tank
1 x	FuelTank Cap (red)
1 x	Ignition bed V2 Red color
1 x	500 ccm complete gasoline fuel tank

9,247.21EUR