224.27EUR

Compact on-board starting system (9525)
[FEM9525]


Suitable for:
- Titan ZG 45

Different from the universal on-board starting system, the starting device and the starter engine of the compact on-board starter are attached directly to the internal combustion engine. Thus the internal combustion engine and the on-board starter form a compact unit. According to the available space it has to be decided individually for every model which one of the two variations can be used.

Advantages of the compact on-board starting system:
> The internal combustion engine can easily be assembled and dismantled, together with the complete on-board starter - on the model as well as on the test-bench.
> Internal combustion engine or on-board starter can easily be reached when being serviced.
> The complete driving unit can easily be hung up on the dynamically damped elements.

Control of electronic on-board starting systems:
The electronic on-board starter is controlled via micro switches operated from an IC-servo. This has, in comparison to an electronic unit, a higher operational safety. The operation of petrol engines with built-in magneto ignition requires for the control of the electronic on-board starter only a micro switch which can be operated directly from an IC-servo. The heater plug of a heater plug engine can, in conjunction with a switch combination, be switched independently from the starter engine via a channel of the tele control.

Required NC-battery:
For internal combustion engines up to 15 cc: 9.6 volt, at least 0.75 Ah.
More than 15 cc: 12 volt, at least 1 Ah.



temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connector CAN 15
2 x Propeller balancer
1 x Banna gold connector 2,5 mm (M/F)
1 x Field folding model stand SebArt
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x XH female balance (5S) connector (2 pcs)
1 x Medidor ángulos y/o incidencias
1 x Angle measurer
1 x 2 mm female connector (2 pcs) with safety connector
1 x Conector BEC male (10 pcs)
1 x Conector Servo female 4 pines
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH female balance (4S) connector (2 pcs)
1 x Gold antispark 4 mm plug
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors banna oro 3 mm (M/F)
1 x XH male balance (3S) connector (2 pcs)
1 x WingFix ULTRA Black Edition
1 x Surface Indicator Gauge Small
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Truck-trailer for gliders 720 x 285 mm
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Optotronix Aurora Plug
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x XH male balance (2S) connector (2 pcs)
3 x Connectors DEANS (T)
2 x XH female balance (2S) connector (2 pcs)
1 x Conector BEC female (10 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
2 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Cockpit plastic closing
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (2 m)
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x Steering arm 16 mm Ø 4 mm
1 x Cabin latch Fox MDM1 4m (pair)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
2 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
2 x Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ABS tube 5.0x4.0x1000 mm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x ABS tube 3.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 5.0x4.0x156 mm
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x ABS tube 5.0x3.0x1000 mm
2 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x ABS tube 16.0x14.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 8.0x6.0x1000 mm
2 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Cabel charger transmitter GRAUPNER
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x 3,2 mm Prop Adapter M6
1 x Trike XL motor set (motor+esc+prop)
1 x Parachute expulsion foam
1 x SE Ring 480 mm (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Protector Connector MPX (1 pair)
1 x Mounting frame MPX female connector
1 x Connectors DEANS (T) micro
1 x Conector XT-30 (hembra)
1 x XH female balance (8S) connector (2 pcs)
1 x Conector JR Servo male (10 pcs)
1 x XH female balance (6S) connector (2 pcs)
1 x Soporte carbono MR30 (2 pcs)
1 x Field folding model stand
2 x Window mounting channel Type H 2.5x0.5 (2 m)
2 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cockpit latch closing I=10 mm
1 x Split M1,2x10 (10 pcs)
1 x Pushrod octagone 3/2 with coupler M2
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x Tip wing protector 40x14 (2 pcs)
2 x STEERING FRONT WHEEL SYSTEM BIDULE 111
2 x Triple rod con. 2mm Pushrod (2 pcs)
1 x Landing gear frontal support 25x32x16
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Cable tie mounts 4.3 (4 uds)
1 x Actuator Electric 25 mm HIGH TORQUE
1 x Split pin 1x8 mm (10 uds)
1 x Allen wheel collar M3x3
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Clip mini fixing for wing (2 pcs)
1 x Wheel collar 5 mm Ø (4 uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x ABS tube 10.0x8.0x1000 mm
1 x Air pressure gauge
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x XH male balance (4S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x 
1 x RX external cable for estandar receivers
1 x Cooler motor type 280
1 x Landing gear retract neumatic (Jet Legend)
2 x 800TVL CMOS camera for FPV
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x EasyFLY Addon
1 x Crystal RX 35.120 Ch 72
1 x Cooler motor type 150
1 x Electronic switch JETI SP6 0-15v/6A
1 x MPS Gas-Cap-Powerswitch
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Long Switch On/Off micro
1 x MAX BEC 2D plus EX
1 x Multi-adapter balancer JST/C - TP
1 x Interruptor RX/Batterie
1 x Crystal TX 35.100 Ch 70
1 x MAMBO 17
1 x SERVO DES 588 BB MG
1 x Crystal TX 35.010 Ch 61
1 x Crystal Universal RX 35.140 Ch 74
1 x SD HC 8 GB
1 x Indoor Brushed motor kit
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x Extension 5 lipos JST/C
1 x Support Flush MPX Conector (6 pcs)
1 x Soporte grifo FESTO (2 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x Lead with adhesive (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Support conector MPX (6 pcs)
1 x Support XT60 conector (2 pcs)
1 x Support Filtro FESTO
1 x Soporte grifo FESTO vertical (1 pcs)
1 x One touch canopy lock
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x Locking cable tie 3.2x142 (uds)
1 x Screw-lock connector M2 (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x Pushrod octagone 4/3 with coupler M3
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Sparkplug 1/4-32 Glow
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Actuator Electric 25 mm
1 x Compact on-board starting system (9525)
1 x Tank BULL MØ1 3L+14L Smoke (CMJets)
1 x Conector MR-60 (pareja)
1 x Sparkplug NGK CM6
1 x Secraft Fuel system v2, red color
1 x Sparkplug DLE CM6
1 x 15 mm gas motor standoff
1 x Spark motor OS nº 3
1 x 12 mm floating pad (49 pcs)
1 x Antenna Hole Cap V1 (Silver)
1 x Sparkplug Saito 400
1 x 11 mm Rubber pads (14 pcs)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Controller Retract Box ER-200 V2
1 x Compact on-board starting system (9512)
1 x Tren electrico JP ER200 F-16 1:6 TOPRC
1 x Selfstarr EME35
1 x Compact on-board starting system (9713)
1 x DLE Ignition unit
5,890.70EUR
Manufacturers
Manufacturer Info
FEMA
FEMA Homepage
Other products
Languages
Español English
Currencies