Top » Catalog » Acces. for Motors » Starters/CDi » SETOKW

16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]

This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spark motor OS nº 3

temporarily out of stock

Quick Find

Shopping Cart

1 x	Servo TT ACE SHV 1504 MG
2 x	"S" set for planes
1 x	Yellow smoke canister 140 g
1 x	Ventral support for AX-18/AX-60
1 x	SERVO DES 658 BB MG
2 x	Blue smoke canister 100 g
4 x	Soporte metal para servos
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Green smoke canister 65 g
1 x	White smoke canister 140 g
2 x	"M" set
2 x	Blue smoke canister 140 g
1 x	3l Smoke oil
1 x	"S" set for boats
1 x	Parachute expulsion foam
1 x	AX-60 starters (5 pcs)
2 x	SERVO DES 588 BB MG
2 x	Remote electric ignition system
2 x	White smoke canister 65 g
1 x	White smoke bombs AX-3 (10 pcs)
2 x	Red smoke bombs AX-60 (5 pcs)
2 x	Red smoke canister 140 g
1 x	Initior Transmitter FTX2 Wireless
1 x	Smoke set "S"
1 x	Yellow smoke canister 65 g
2 x	SERVO DES 568 MG
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Servo inverter
1 x	BALSA leading edge 8x10x1000 mm
1 x	Horn for flap control (1 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	6 mm blue aluminium threaded horn with patella
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	BALSA triangular 15x15x1000 mm
2 x	BALSA trip 10x10x1000 mm
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Cable control set
1 x	Extractor piñones 2.3/3.2 mm
1 x	Horn 16,5x20 mm (2 pcs)
2 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Horn 5/20 with M2 Bearing
1 x	BALSA triangular 8x8x1000 mm
1 x	20 mm carbon horn
1 x	Pine wood slat 10x10x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	Green smoke canister 140 g
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Lock nut M4 (10 pcs)
2 x	Threaded insert M6 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Nut for mounting M3 (4 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	50 mm servo arm with bearing (2 pcs)
2 x	SERVO DES 707 BB MG
1 x	Screw M2x8 (10 pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
2 x	SERVO DES 806 Pignons
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Pan Head Screw M2x6 PH
1 x	Lock nut aluminium M2.5 (4 pcs)
2 x	40 mm servo arm with bearing (2 pcs)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Parachute XTRALITE S
1 x	ESC ALPHA 60A HV
1 x	Smoke set "M"
1 x	Smoke set "Glider"
1 x	Professional Servo tester
2 x	SERVO DES 806 Pignons
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	B4-0 rocket charges (6 pcs)
2 x	Servo HBS 690BB HV Digital
1 x	White smoke canister 100 g
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	DINO Glider ARC
1 x	UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x	Glidder Mü13e (Bergfalke)
1 x	BABY glider drawings (Aero-naut)
1 x	X-RAY Micro QR (Elevator)
1 x	Glider IKARUS
1 x	X-RAY Micro QR (Tail Tube)
1 x	X-RAY Micro QR (Rudder)
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	XICOY X45 rail
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Glow Plug Clip 1.3 Ah
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	USB Mini Camera endoscope
1 x	SERVO DES 707 BB MG, Pignons
2 x	Ventus 1:4 set of instruments
1 x	DLE 30 complete electronic ignition
1 x	GLOW 2C + accesories
1 x	Starter EM Gear Power 80
1 x	1/10 Pilot "Jack"
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Jet Afterburner Simulator NF-Jet3 YSW
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Bird (Aero-naut)
1 x	Bidule 55 2460 mm Cabina
1 x	6 mm M3 variable horn
1 x	140 mm rods + T patellas set for direction control
1 x	Servo inverter
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	EDGE 540-A 105" (2660 mm)
1 x	TMM 1210-3S heli
1 x	Yellow smoke canister 100 g
1 x	Glow starter with charger 230v
1 x	Starter EM Gear Power 250

12,356.49EUR