479.00EUR

Wing OXY 5,0 m2
[OP12105]


Description
Have you ever dreamt of it? Opale Paramodels did it! Among the last new products from Opale Paramodels, Oxy 5.0 is the biggest wing ever marketed to practice RC paramotor, with its 5,10m wingspan. Thanks to its singleskin technology, Oxy 5.0 provides such an accessibility that make it suitable for beginners willing to begin with the discipline. Indeed, the wing is easy to inflate and its piloting is both smooth and accurate. Its range of use (4 to 15kgs) is very large and have a reduced consumption.

DS-Technology
Thanks to DS-Tech (short for Double-Stick Technology, developped by Opale Paramodels and patented by our R&D department), no folds can be found neither the tissue nor the leading edge, for a solid render: the wing is perfectly tensed and provide a clean render. While performing acrobatic tricks, the wing doesn't close, avoiding unpleasant surprises. Moreover, its 25 cells provide an irreproachable ballooning, leading through good performances and a clean surface state.

A unique quality control
Opale Paramodels warranty an unequalled quality of assembly. Made according to specific and technical criterias, each wing have a unique serial number, allowing its control at the end of production, and providing an optimal traceability for each of them.Oxy 5.0 is compatible with Backpack L, Trike L and Trike XL. For a bigger ease of use and repair, Oxy 5.0 is set up with new rings and bigger and more resistant risers as well.

Technical data:
- flat area: 5.10 m
- flat wingspan: 5.10 m
- Aspect ratio: 1:5
- Cells: 25
- Tissue: Ultra-light Nylon 32 g - Weight: 140 g

Compatible:
- Backpack: L
- Trike: L, XL - Weight range: 5 up to 15kg


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
6 x Coversion set HIROBO EX/EAGLE elektro
2 x Carbon blade 230 mm
3 x Rotor blade 3Bl Scale 1050R
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
2 x Carbon fiber rod 10 mm x 1000 mm
1 x Extinguisher CO2 - 2 Kg
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
3 x Paramotor Trike XL
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Motor EME 60 cc
1 x SE Ring 450 mm (2 pcs)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x SE Ring 350 mm (2 pcs)
1 x Silicone red 0,75 qmm wire ( 1 m)
1 x 110x55 mm C SLH KOVO wheel
1 x Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x Protective Cover for wires Ø 15 mm 1000 mm
3 x Carbon fiber rod 6.0 mmx1000 mm
2 x Pitts Mufflers EME 55/60 cc
1 x Silicone red 0,5 qmm wire ( 1 m)
1 x Epoxy 40 min. 4kg (Hardener)
1 x Vacuum bag, 1200 mm x 50 m
2 x Parachute BACKUP X100
1 x 22m Fitting barb
1 x Piston ring EME 35cc
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Receiver replacement antenna, approx. 15
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x 1/4 Pilot "Mike"
1 x CDI EME 120cc
1 x Cut tube
1 x Hot Glue Stick BLACK
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x White silicone 0,25 qmm wire (150 m)
1 x Suport PITOT
1 x TMM 2512-3S heli
1 x DUPLEX 2.4EX Expander E4
2 x Carbon fiber rod 4.0 mmx1000 mm
1 x Copier 2x20 cm pcs
1 x 35 mm gas motor standoff
1 x 102 mm aluminium spinner
1 x BALSA trip 5.0x5.0x1000 mm
1 x DUPLEX USB Adapter
1 x Pitts Mufflers EME 35 cc
1 x Hexagonal ball head 2.0 x 50 mm
1 x Aluminium ignition bad (red)
1 x 20x1000 mm Ring Strap Back To Back
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Vacuum pump P1-N
1 x Selfstarr EME35
1 x Z-shaped servo mount
1 x MT 125 temperature sensor
1 x 1/6 Pilot "Buddy"
1 x 12 mm floating pad (49 pcs)
1 x 20 mm carbon horn
2 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x 10 mm gas motor standoff
2 x Aramid 50 daN 50 m
3 x Para-RC Mix
1 x Propeller electric carbon 9.5x6
1 x USBCOM 5i
1 x Fresa corte diamante Ø 2.35mm (lentil)
2 x CDI EME 55/60 cc
1 x Squared carbon wing joinner 5x5x220 mm
1 x Propeller POWER-PROP 14x12
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon fiber flat 1000x6.0x0.8 mm
1 x 15 mm floating pad (30 pcs)
1 x Lock nut M2 (20 pcs)
1 x Autogyro Cierva C30 Spain
1 x FesEx-Uni6 System
1 x DUPLEX 2.4EX MT 300 EX
1 x Screws M1,6x6 Allen
1 x Pick up EME 55/60 cc
4 x Wing OXY 5,0 m2
1 x Ball joint long
1 x Epoxy 5 min. 500 g (Hardener)
1 x SERVO DES 806 Pignons
1 x PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x Prop Shaft Adapter 5 mm "long"
1 x DUPLEX R12 EPC receiver 2,4GHz
1 x Silicone red 0,25 mm² wire (25 m)
1 x L-shaped servo mount
4 x Para-RC Trike "RC-Bullix"
1 x Car Charger DC/DS-16
2 x Linden wood slat 3.0x3.0x1000 mm
1 x Switch for DC: Long 3 Position
1 x PowerBox Battery 4000
1 x DUPLEX R12 receiver REX Assist
1 x DPS Switch JR/JR
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Gear for MICRO BB
1 x Red silicone 1,0 qmm wire (50 m)
1 x PowerBox Smokepump
1 x 3.2 mm Prop Adapter M6
1 x Decorative caps, multicoloured, short
1 x Motor RACE 20 Navy 12v
1 x Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x Neck strap JETI DC
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 5 mm Prop Adapter CN-Spinner
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x Super light ∅45x9 mm axi ∅3 mm metalic core wheel
1 x Foam plastic plates (310x210x3 mm)
2 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x switch long 3-position DS Tx DUPLEX 2,4EX
3 x Motor A2212/13T
2 x Wing OXY 0,5 pulgadas2
1 x AddCAP 10AS capacitors
1 x BALSA trip 3.0x3.0x1000 mm
2 x 10 mm gas motor standoff
1 x Blade holder center
1 x DUPLEX R14 receiver 2,4GHz
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Propeller electric carbon 8.5x6
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x Epoxy 5 min. 500 g (Resin)
1 x Servo SAVOX SA-1256 TG
1 x Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch
1 x 5 mm gas motor standoff
1 x 45x19 mm hard foam KOVO wheel (2 pcs)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x Carbon fiber rod 2.5 mmx1000 mm
1 x Thundertail (RBC Kits)
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Head runner
1 x Propeller electric carbon 10x6
1 x Cabel charger transmitter GRAUPNER
1 x 3,2 mm Prop Adapter M6
1 x Nylon hinge 15x0,3 (10 pcs)
2 x Carbon fiber rod 12 mm x 1000 mm
1 x DUPLEX R18 EX 2,4GHz + Rsat2
1 x Hand Pads for Tray JETI
1 x Double conector with JR adapter and 200 mm extension
1 x Piston EME 35cc
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Propeller POWER-PROP 11x9
1 x Head spacer
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Propeller APC 10x6 Electric
1 x Marker ties (20 pcs)
1 x Motor EME 70 cc with autostarter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x DUPLEX 2.4EX Expander E2
1 x Winter-Glove DS tx
1 x White silicone 0,25 qmm wire (100 m)
1 x T-Motor U7-V2.0 Kv420
1 x 2,5x60 mm allen screwdriver
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x LUCAS pilot ARTF
1 x Carbon blade 3D 230 mm
1 x Electric spoiler 185 mm (2 pcs)
1 x Propeller APC 12x4.5 MR Electric Pusher
1 x Miss ULTIMATE 50E , Red Motor Cowl(SebART)
1 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
2 x Trike XL motor set (motor+esc+prop)
1 x Sukhoi 29S 140" 3D Monster, White cockpit(SebART)
2 x 
1 x Set cintas unión paracaídas 145 cm
1 x Big Crow DLE-170M
1 x Windsock Ozone L -1200 mm
1 x Swift ARF 2000 mm Red (Hacker Model)
2 x Parachute PV6 for F3J
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Premium Muffler
1 x Sensor telemetry FUTABA SBS-01C
1 x Propeller APC 12x4.5 MR
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Small Crow DLE-170M
1 x MAX pilot ARTF
1 x Opale Rucksack
2 x VBar NEO
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x Turbine KingTech K30G Restart
1 x 3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x SUPER DIMONA TC-80
1 x 4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Sukhoi 29S 140" 3D Monster, White cockpit(SebART)
1 x Motor DLE 200cc Std
1 x Paramotor BackPack XXS (without accessories)
1 x Oracover Azul Cielo 2 m
1 x Motor DLE 430 cc - Paramotors
1 x Pilatus PC-21 50E, Decal set (SebArt)
1 x P-51 Red PNP 1700 mm (FMS)
1 x 120x60 mm SLH KOVO wheel
1 x GROB G109 Elektro 2.770 mm
1 x Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt)
1 x Pilatus PC-21 50E, Yellow cabine (SebArt)
1 x Pilatus PC-21 50E, Pilots set (SebArt)
1 x Monoprep (RBC Kits)
1 x Skyray (RBC Kits)
1 x DC-3 Douglas (White/Blue) 1800 mm
1 x DC-3 Douglas (DAKOTA) 1800 mm
1 x Macchi MC72 50E RED/GOLD
1 x HM-16 "Pou du Ciel" (RBC Kits)
1 x Mig-29 "FULCRUM" (RBC Kits)
1 x F-35C (RBC Kits)
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x Mig-25 "FOXBAT" (RBC Kits)
1 x F-20 Tigershark (RBC Kits)
1 x Motor MVVS 2.0/1120
1 x Skyhawk (RBC Kits)
1 x Axi for MVVS 3.5 Sport
1 x F-22 Raptor (RBC Kits)
1 x Motor MVVS 5.6/690 GLIDER
1 x Pilatus PC-21 2100 mm BLUE/WHITE (SebArt)
1 x Pilatus PC-21 50E, Blue cowl (SebArt)
1 x Pilatus PC-21, Red cabine (SebArt)
1 x Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt)
1 x F-100 Super Sabre (RBC Kits)
1 x Hovercraft sailcloth
1 x Pilatus PC-21 2100 mm RED/WHITE (SebArt)
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Motor Set CHALLENGER Indoor
1 x Trailing leg 131 mm
1 x SERVO DES 588 BB MG
1 x EasyFLY Addon
1 x Rescue 1,8m2 / BackPack
1 x Program 5v SIO RS 232
1 x Servo Controller Fibra optica
1 x MAMBO 17
1 x KIRA 600-24 6,7:1
1 x KIRA 480-34
1 x KIRA 400-27
1 x KIRA 500-30 6,7:1
1 x KIRA 600-30 6,7:1
1 x KIRA 500-36 6,7:1
1 x KIRA 600-20
1 x KIRA 480-38
1 x KIRA 480-43
1 x KIRA 600-20 6,7:1
1 x KIRA 400-39 5,2:1
1 x PYRO 750-50L Competition
1 x KIRA 600-17
1 x PYRO 700-45 Long Axi
1 x KIRA 400-34
1 x KIRA FAI 5F5/4s
1 x KIRA 480-26 5,2:1
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x PYRO 800-40 Long Axi
1 x KIRA 600-38 6,7:1
1 x KIRA 600-22 6,7:1
1 x KIRA 480-34 5,2:1
1 x PYRO 600-11
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x LASER 73" 1.85m (05) PILOT
1 x DUPLEX 2.4EX Central Box 210
1 x SyRen 50A 6V-30V Regenerative Motor Driver
1 x SyRen 10A 6V-24V Regenerative Motor Driver
1 x Propeller POWER-PROP 13x9
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Conector JR Servo female (50 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x Conector XT-30 (hembra)
1 x Conector JR Servo male (10 pcs)
1 x Conector Servo female 4 pines
1 x Conector JR Servo female (10 pcs)
1 x BALSA trip 2.0x2.0x1000 mm
1 x Connectors banna oro 4 mm (M/F)
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Connector CAN 15
1 x Connectors banna oro 3,5 mm (M/F)
1 x BALSA trip 4.0x4.0x1000 mm
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Conector FUTABA Servo male (10 pcs)
1 x Conector JR Servo male (50 pcs)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x Conector BEC male (10 pcs)
1 x Walnut wood slat 1.5x1.5x1000 mm
49,631.30EUR
Manufacturers
Languages
Español English
Currencies