Top » Catalog » Multicopters » DJI » DJIFPVCOMBO

1,349.00EUR

DJI FPV Combo
[DJIFPVCOMBO]

DJI FPV Drone Combo

Contenido del Packete
1 X DJI FPV Racing Drone
1 X DJI Control Remoto
1 X DJI FPV Goggles V2
8 X Hélices (4XCW 4XCCW)

DJI FPV: The road to amazing adventures in FPV flying is now open, for everyone.
Discover the true meaning of flying, taking to the skies with power, speed and... complete control.
Creating incredible FPV images has never been so accessible.

The most immersive flying experience
With First Person View (FPV) through DJI Goggles V2, you'll experience flying on a different level. You see in Real-Time where you are flying to.

FPV for EVERYONE: 3 different modes
Whether you're a seasoned FPV expert or a complete beginner, 3 different flight modes make the drone suitable for everyone and you'll fly with confidence right from the start.
S Mode: Dynamic mix between the freedom & speed of an FPV drone with simplified controls like familiar DJI drones.
N Mode: Ideal for the (absolute) beginner. Feels like a regular DJI drone.
M Mode: Go all the way, with no limits. The full FPV experience with adjustable parameters. Accelerate faster than sports cars and go from 0-100 in 2s and tear past at up to 140kph.
Videos with cinematic quality & smoothness
Video quality: up to 4K at 60 frames per second. Super Wide View Angle of up to 150°.
120 Mbps bit rate. 1080p up to 120 FPS.
RockSteady Stabilization: EIS technology for extremely stable images, no matter how aggressively you fly.
Images in up to 3840x2160
The world through the DJI Goggles with DJI OcuSync 3.0 video transmission.
The DJI Goggles (glasses) through which you see the live view, receives real-time images at 810p and 120fps, with a high bit rate of 50Mbps. Images are transmitted to the goggles within 28 milliseconds (ms), up to a maximum distance of 10KM!
Small mistake? A moment of panic? No need to panic. The Emergancy Brake and Hover button is your wingman.
With one push of the button, the DJI FPV brakes and hovers in place. No matter which controller or flight mode you use, this button is always available.
Advanced safety features
Rest assured, with Smart Return To Home you can put the drone back down where it took off at the push of a button, fully automatically. (Also Low Battery RTH). Forward and downward sensors detect obstacles, and a downward facing light and colour-adjustable LEDs on the arms keep your drone visible in all conditions.
DJI Motion Control: the new way to control your aircraft
With the optional DJI Motion Control, you can control this drone with simple hand movements, in a natural way. This is not only super innovative, but simply a whole new way of flying. The standard controller enjoys a dynamic design, specially created for FPV.
Easily replaceable parts
Up to 20-min battery life
DJI Fly App
Aerobertics.be is official DJI dealer. The best support & service guaranteed. For all your questions, feel free to contact us or visit our 800m² shop in Bruges, with DJI Showroom or order now in our convenient webshop.
FEATURES
Drone:
Take Off Weight: ca. 795g
Dimensions: 255×312×127 mm (with propellers) / 178×232×127 mm (without propellers)
Diagonal Distance: 245 mm
Max Wind Resistance: 39-49kph

Goggles:
Weight: 420g all included
Dimensions: 184×122×110 mm (antennas excluded) / 202×126×110 mm
(antennas included)
Screen Size: 2-inches (×2)
Screen Refresh Rate: 144 Hz

under request

Reviews

Quick Find

Shopping Cart

1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 50 cm (Futaba)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Circlick securite
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension silicon 25 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension silicon 75 cm (Futaba)
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 100 cm (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 30 cm male (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
2 x	Lock washer 2.2 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
2 x	Quicklock washer 1 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
2 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	25 mm reinforced hinge
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	15 mm reinforced hinge
1 x	Large flex hinge (12 uds)
1 x	18 mm reinforced hinge
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Miniature brass strap hinge, 1 m
2 x	Small pinned hinge (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Z Bender - S Type Tool
1 x	Copier 2x20 cm pcs
1 x	Crimping tool
1 x	Ball Link Plier
1 x	Vacuum pump 12 CFM
1 x	Copier 5x20 cm pcs
1 x	Dust collector for mould cleaning
1 x	Hot Glue Stick BLACK
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Horn 5/20 with M2 Bearing
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Small aluminium horn gold (2pcs)
1 x	Digital scale up to 40 kg
1 x	Horn 6/35 with M3 Bearing
1 x
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	2,5x60 mm allen screwdriver
1 x	Screwdriver for Torx® TX8
1 x	RH long aluminium horn (2pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	20 mm carbon horn
1 x	LH long aluminium horn L31xH30 (2pcs)
2 x	Hexagonal ball head 2.0 x 50 mm
1 x	6 mm red aluminium threaded horn with patella
2 x	Hot Glue Stick RED
1 x	Starter EM Gear Power 250
1 x
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Ball Link Plier
1 x	Horn for flap control (1 pcs)
1 x	Cable with accesories
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Vacuum pump P1-N
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 6/27 with M3 Bearing
2 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Crimping tool
1 x	Starter 12v (Max 90 and 15ccm)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Small aluminium horn red (2pcs)
3 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Starter 12v (Max 180 and 30ccm)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Xplorer1 anemometro
1 x	Xplorer2 anemometro
1 x	Motor DLE 430 cc - Paramotors
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "Tony"
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Futaba Female 40 cm extension
1 x	Extension 100 cm (Futaba)
1 x	Screw M3x20 (10 pcs)
1 x	Pan Head Screw M1,6x8 (10 pcs)
1 x	Socket Head Screw M2x10
1 x	Screw M2x6 (10 pcs)
1 x	Socket Head Screw M2x8
1 x	Aluminium wide washer M4 Blue (4 pcs)
3 x	Spare Part Frame Set for EACHINE RACER 250
1 x	DJI FPV Combo
1 x	Propeller POWER-PROP 7x7
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Support Flush MPX Conector (6 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Motor OS 3820-1200 electric
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Support FUEL DOT V3
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Landing gear Rocket 400
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Cable control set
1 x	3,0x60 mm allen screwdriver
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Tail tube RAINBOW
1 x	Fuselage Autogyro RAINBOW
1 x	Washer 2.2×4
1 x	Blade holder upper
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	AC-10 pre-rotacion with motor
1 x	Robart Door Hinge (Pk2)
2 x	Servo Fork
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	SkyMaxx 1.550 mm (kit)
1 x	Long ball link M2 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	Nitroverdu 500 ml
1 x	Universal Colour Paste deep black 250 g
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Indoor hinge with servo arm integraded
1 x	Gates hinge aluminium (1 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Bearing 3x6x2,5
1 x	Long pinned hinge (6 uds)
1 x	MPX 8 pins plug mold
1 x	Bearing housing
1 x	Tail support (2 pcs)
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Blade Holder Full (4 blades)
1 x	Rotor Mast
1 x	Side rudder
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Mini Lock Grips 2PCS
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Long adjustable control horn 3x34
1 x	Nut M2 securing
1 x	Steering lever
1 x	Blade holder center
1 x	DJI Mavic Air Fly More Combo
1 x	Propeller POWER-PROP 10x6
1 x	Propeller POWER-PROP 12x8
1 x	16x10 tree blades propeller Master Airscrew
1 x	Propeller electric carbon 8.5x7
1 x	Propeller POWER-PROP 11x6
1 x	Propeller POWER-PROP 14x12
1 x	Dumper propeller 6/8 mm

15,990.28EUR