Top » Catalog » Multicopters » DJI » DJIFPVCOMBO

1,349.00EUR

DJI FPV Combo
[DJIFPVCOMBO]

DJI FPV Drone Combo

Contenido del Packete
1 X DJI FPV Racing Drone
1 X DJI Control Remoto
1 X DJI FPV Goggles V2
8 X Hélices (4XCW 4XCCW)

DJI FPV: The road to amazing adventures in FPV flying is now open, for everyone.
Discover the true meaning of flying, taking to the skies with power, speed and... complete control.
Creating incredible FPV images has never been so accessible.

The most immersive flying experience
With First Person View (FPV) through DJI Goggles V2, you'll experience flying on a different level. You see in Real-Time where you are flying to.

FPV for EVERYONE: 3 different modes
Whether you're a seasoned FPV expert or a complete beginner, 3 different flight modes make the drone suitable for everyone and you'll fly with confidence right from the start.
S Mode: Dynamic mix between the freedom & speed of an FPV drone with simplified controls like familiar DJI drones.
N Mode: Ideal for the (absolute) beginner. Feels like a regular DJI drone.
M Mode: Go all the way, with no limits. The full FPV experience with adjustable parameters. Accelerate faster than sports cars and go from 0-100 in 2s and tear past at up to 140kph.
Videos with cinematic quality & smoothness
Video quality: up to 4K at 60 frames per second. Super Wide View Angle of up to 150°.
120 Mbps bit rate. 1080p up to 120 FPS.
RockSteady Stabilization: EIS technology for extremely stable images, no matter how aggressively you fly.
Images in up to 3840x2160
The world through the DJI Goggles with DJI OcuSync 3.0 video transmission.
The DJI Goggles (glasses) through which you see the live view, receives real-time images at 810p and 120fps, with a high bit rate of 50Mbps. Images are transmitted to the goggles within 28 milliseconds (ms), up to a maximum distance of 10KM!
Small mistake? A moment of panic? No need to panic. The Emergancy Brake and Hover button is your wingman.
With one push of the button, the DJI FPV brakes and hovers in place. No matter which controller or flight mode you use, this button is always available.
Advanced safety features
Rest assured, with Smart Return To Home you can put the drone back down where it took off at the push of a button, fully automatically. (Also Low Battery RTH). Forward and downward sensors detect obstacles, and a downward facing light and colour-adjustable LEDs on the arms keep your drone visible in all conditions.
DJI Motion Control: the new way to control your aircraft
With the optional DJI Motion Control, you can control this drone with simple hand movements, in a natural way. This is not only super innovative, but simply a whole new way of flying. The standard controller enjoys a dynamic design, specially created for FPV.
Easily replaceable parts
Up to 20-min battery life
DJI Fly App
Aerobertics.be is official DJI dealer. The best support & service guaranteed. For all your questions, feel free to contact us or visit our 800m² shop in Bruges, with DJI Showroom or order now in our convenient webshop.
FEATURES
Drone:
Take Off Weight: ca. 795g
Dimensions: 255×312×127 mm (with propellers) / 178×232×127 mm (without propellers)
Diagonal Distance: 245 mm
Max Wind Resistance: 39-49kph

Goggles:
Weight: 420g all included
Dimensions: 184×122×110 mm (antennas excluded) / 202×126×110 mm
(antennas included)
Screen Size: 2-inches (×2)
Screen Refresh Rate: 144 Hz

under request

Reviews

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
2 x	Angled clevis with threaded rod M3
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	Profile ABS Square 1 x 1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
2 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
2 x	ABS angle 6,0x6,0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
2 x	U Profile ABS 1,0x2,0x1000 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS angle 5,0x5,0x1000 mm
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
3 x	SERVO HOLDER
2 x	Tow hook for tug
1 x	Towing hook
1 x	Towing hook <3m
1 x	Fixed launching hook
1 x	Towing hook
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Small pinned hinge (12 uds)
1 x	25 mm reinforced hinge
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Long pinned hinge (6 uds)
1 x	15 mm reinforced hinge
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Smoke set "Glider"
1 x	M3 black washers (4 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Ferrita con funda
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Gear for MICRO BB
1 x	120x60 mm SLH KOVO wheel
2 x	Gear for D 200 BX
2 x	Servo KST A08H V6.0 3,2Kg HV
2 x	Servo KST X10 MINI wing 10mm 23g 7.5Kg
3 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	PS-050 TONEGAWA Servo
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	SAVOX SH 0254 servo
2 x	ABS angle 2,0x2,0x1000 mm
2 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	ALU servo arm 90º 3 mm shaft
2 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x	Cable coupler M2x66 (2 uds)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	wire tensioner (black)
1 x	Cable coupler M3 (10 uds)
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	Turnbuckle M2x22/35 (2pcs)
1 x	Threaded coupler M2 (10 pcs)
1 x	wire tensioner (blue)
1 x	5 mm Prop Adapter M8
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	3 mm Short Prop Adapter M5
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	6 mm Prop Adapter M8
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Profile ABS Square 4 x 1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	DJI Mavic Air Fly More Combo
1 x	DJI FPV Combo
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x	TS832 to Gopro AV/Power Cable
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	Fournier RF-4D
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
2 x	Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Rubber profile 8-2 mm 2M
2 x	Profile ABS half cane 6.0x1000 mm
2 x	Profile ABS triangular 4.0x1000 mm 60º
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Adjustable launching hook
1 x	Profile ABS Square 2 x 1000 mm
1 x	Large flex hinge (12 uds)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	T-Hose connector 3-3-3 mm
1 x	Servo arm with 4 mm hole to FEMA 9810A
1 x	Landing gear strap small (4 uds)
1 x	Y-Hose connector 6-6-6 mm
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Retract undercarriage
1 x	150 Newtons FEMA absorber
1 x	Servo Dymond D 37 Eco
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Servo GO-09 9g
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Charger LiPo Charger4
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Air pressure gauge
1 x	Servo HITEC HS-65 HB
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Axle wheel with accesories
1 x	Servo KST X08 Plus 9g HV servo
1 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	AXI 2808/16 V2 Long
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	Z-shaped servo mount
1 x	Fiberglass motor-holder for electric motors
1 x	Wheel FEMA 70 mm / 5 mm
1 x	Brake for 140 mm wheels
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	A50 Motor Mount Alu complete set
1 x	Spring clamp for tube Ø50 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Elevator VENTUS 2cx 4.5m
1 x	GP 15 JETA
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	270 mm 3/3 mm shaft ship
1 x	GPS Logger Dymond
1 x	Soporte servo KST X08/H and Plus
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	USB programador GO servos
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Servo GO-02 Digital 1.8g
1 x	Servo GO-1053 MG 20.0kg
1 x	Servo GO-1013 MG 3.8kg
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Foreman, scale 1:32
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Spikes Band (5 m)
1 x	Receiver bed (Blue)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	AXI 2826/10 V2 Long
1 x	Propeller 12x6 Falcon electric
1 x	AXI 2814/10 V2 Long
1 x	AXI 2814/20 V2
1 x	AXI 2820/14 V2
1 x	Metalic motor holder for class 550-600
1 x	Size "M" motor holder for class 400
1 x	3.2 mm Prop Adapter M8
1 x	3 mm Long Prop Adapter M5
1 x	Absorver mount set for 5-10 Kg models
1 x	5 mm Prop Adapter M6
1 x	Mudguard wheels 112/127 mm
1 x	Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x	Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x	Covered closure or fairings
1 x	Profile ABS half cane 5.0x1000 mm

13,646.05EUR