2 x | Round Rod 1,25x1000 mm |
2 x | Futaba Female 40 cm extension |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
3 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn for flap control (1 pcs) |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | 5 mm M2 variable inclined horn |
1 x | Adjustable brass horn threaded M3 |
4 x | Profile ABS Square 1 x 1000 mm |
2 x | ABS rectangular profile 10x5.0x1000 mm |
3 x | Profile ABS half cane 2.5x1000 mm |
2 x | Brass control horn M2 long for wire (10pcs) |
4 x | ABS angle 1.5x1.5x1000 mm |
5 x | Horn mando small (2 pcs) |
2 x | 5 mm M2 variable horn |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 6 mm aluminium horn with patella |
3 x | Cable with accesories |
3 x | Control horn long w/ball |
2 x | Brass control horn M2 large for wire (2pcs) |
4 x | Horn 13,5x16 mm (2 pcs) |
2 x | Horn DUBRO 1/2A |
2 x | 20 mm carbon horn |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
4 x | ABS angle 4,0x4,0x1000 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
4 x | Profile ABS half cane 3x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Horn 6/20 with M3 Bearing |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
2 x | L-Connector 1.5 mm x 1000 mm |
2 x | Profile ABS half cane 8.0x1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | 1/6 Pilot "Cindy" |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | Propeller APC 16x10 Glow/Gas |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Futaba 20 mm servo arm |
1 x | Solvent Plasti Dip 1000 ml |
1 x | FunCup XL RR |
1 x | Round Rod 1,5x1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Servo SAVOX SV-1273 TG |
1 x | 90x60 mm standart servo cover |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | EC-Cutter |
3 x | ABS angle 5,0x5,0x1000 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Gold antispark 5,5 mm plug |
1 x | Servo FUTABA BLS175 SV |
1 x | 3,0x60 mm allen screwdriver |
2 x | Stickers-digit for marking |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Servo inverter |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Cable coupler M3 (10 uds) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 50x45 mm micro-mini servo cover |
1 x | Red smoke canister 65 g |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | L-shaped servo mount |
1 x | Connector Sub-D 2+5 Male |
1 x | 25 mm carbon servo arm |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
3 x | Profile ABS half cane 4x1000 mm |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Servo TOPMODEL DS1413 T |
1 x | Futaba BLS152 - Upper Case |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Ferrita con funda |
1 x | Servos security connector (2 pcs) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Medidor ángulos y/o incidencias |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Tube Pitot to PIXHAWK |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Vest clothes Hispano Aviación |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | XT-60 connector (female) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Cable coupler M2 (10 uds) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Horn mando long (2 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | AX-60 starters (5 pcs) |
2 x | Spinner INO 89 mm Chrome (Imitacion metal) |
2 x | RH long aluminium horn (2pcs) |
2 x | SAVOX SH 0255 MG servo |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Interface Jack Adapter IKARUS |
1 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Birch plywood plate 600x300x2.0 mm |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | JETImodel SINGLE BEC |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | A/C quality beech plywood 498x247x1.2 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | 1/12 Pilot "Langley" |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Rubber profile 10-2 mm 2M |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | UBEC 6A KAVAN |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Servo FUTABA BLS172 SV |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
1 x | 140 mm rods set for direction control |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | Threaded coupler M3 (10 uds) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Conector Servo female 4 pines |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
1 x | White smoke canister 100 g |
1 x | Blind nut M5 (10 pcs) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Ferrita 27x14x7 mm |
1 x | Servo NARO Max Std |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Connectors DEANS (T) micro |
2 x | Cable control set |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Servo SAVOX SV-1260 MG |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Optotronix Aurora Plug |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Futaba BLS255/272/471SV - Gear Set |
1 x | DPS Switch JR/JR |
1 x | Socket head ball link M3 (2 uds) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Windsock Ozone L -1200 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Ball Link Plier |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Servo FUTABA BLS 272SV |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | 18 mm reinforced hinge |
1 x | Allen wheel collar M3x3 |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
2 x | L-Connector 1.0 mm x 1000 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Horn 5/20 with M2 Bearing |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Smoke set "Glider" |
1 x | ORACOVER Fluor red (2 m) |
1 x | Glases Nimbus "Black" |
1 x | Green smoke canister 100 g |
1 x | 20x200 mm battery rings |
1 x | Small aluminium horn red (2pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Pendulun 27g to tank |
1 x | Initior Receiver FRX2 Wireless |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Servo TOPMODEL S7520 MG |
1 x | Handle for PERMAGRIT lime |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Canopy Latch |
1 x | Ply-Span 450x600/13g Blue |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Electric rocket starters (6 pcs) |
1 x | Ferrita 17x10x6.5 mm |
1 x | Paramotor BackPack XXS 2 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
3 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Short ball link M3 (6 uds) |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Servo safety connector (10 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | 4 LiPo XH>EH adapter |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | XT-60 connector (male) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | CM-3 |
1 x | Medium pin type hinge (12 uds) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Para-RC Mix |
1 x | Stainless steel silencer for DA 85/170 |
1 x | Fast attachment for servos (25 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | 6 mm M3 variable inclined horn |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Servo Dymond D 37 Eco |
1 x | Short adjustable control horn 3x24 |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | 5 line servos wire black (1 m) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Oracover Orange 2 m |
2 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Spikes Band (5 m) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | 500 ml sealer (DOPE) |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | Oracover Brown 2 m |
1 x | Servo SAVOX SA-1256 TG |
1 x | M3 Maxi ball link (2 uds) |
1 x | 5 LiPo XH>EH adapter |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Glases Aspen |
4 x | Profile ABS half cane 6.0x1000 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Tape GFK 50 mm |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Hitec 20 mm servo arm |
3 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 11 mm wing servo holder |
1 x | Horn 5/15 with M2 Bearing |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | PCARD Wireless System |
1 x | Glases Stratus |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Heat Seal Iron |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | M3 Maxi ball link (2 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Servo Tester |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | SAVOX SH 0254 servo |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Parachute expulsion foam |
1 x | Metal gear set for HS81MG/5082MG |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Xplorer2 anemometro |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 1/12 Pilot "Tom" |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | AX-60 starters (5 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Futaba 3010 - Gear Set |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Ball link M2,5 (10 pcs) |
1 x | Servo SAVOX SA-1258 TG |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | 90x75 mm standart servo cover |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | 22m Fitting barb |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Long ball link M2 (6 uds) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Horn 6/27 with M3 Bearing |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Tape GFK 38 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Cable coupler M2 (10 uds) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Short ball link M2 (6 uds) |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | SAVOX SH 0254 servo |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Oracover Red 2 m |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Towing hook <3m |
1 x | Round Rod 2,0x1000 mm |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Opale Rucksack |
1 x | Strip 2,0x2,0x330 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Oracover Black 2 m |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Small flex hinge (12 uds) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Futaba 2x20 mm servo double arm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Hitec 25 mm servo arm with M3 ball link |
2 x | Horn with ball 55x40 |
1 x | Ball Link Plier |
1 x | Ball link M3 (10 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | CC 02 |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | ABS tube 10.0x8.0x1000 mm |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Small Crow DLE-170M |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Socket head ball link M3 (2 uds) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | 2 LiPo XH>EH adapter |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Servo FUTABA SBL 471 SV |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | XT-30 connector (pair) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | MPX Sub-D Adaptor |
1 x | Ring 320 mm length (5 pcs) |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Oracover Yellow CUB 2 m |
1 x | Micro control horn (2 pcs) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Connector Sub-D 2+5 Female |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Red smoke canister 140 g |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Extra long horn 60x30 |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Ply-Span 450x600/13g Orange |
1 x | 13 mm wing servo holder |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Slave-cable USB Easy Sim |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Connector CAN 15 |
1 x | Glases Ace |
1 x | Racor 4/6 mm |
1 x | Marker ties (20 pcs) |
1 x | Futaba male 40 cm extension |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | Field folding model stand |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Xplorer1 anemometro |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Motor DLE 200cc Std |
1 x | Copier 5x20 cm pcs |
1 x | Windsock Ozone L - 700 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Futaba 38 mm servo arm |
1 x | MPX-Dean "T" Adapter |
1 x | Long pinned hinge (6 uds) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | DLE 111 Carb gasket (V1) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Smoke set "S" |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Gear for MICRO BB |
1 x | Rescue 1,8m2 / BackPack |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 80 mm rods set for direction control |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Cap Hispano Aviación |
1 x | Towing hook |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Gear for D 200 BX |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | 65 mm mini servo cover |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | SAVOX SH 1250 MG servo digi |
1 x | 12 mm floating pad (49 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Cabling for Fox MDM1 wings |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | USB Mini Camera endoscope |
1 x | 1/4 Pilot "Heidi" |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Blind nut M4 (4 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Ply-Span 450x600/13g Black |
1 x | MIG 29 3D RTF, Servo |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | TrainerCord (master-learner) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Gold antispark 4 mm plug |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 18 mm wing servo holder |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Glases Flitemaster |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 1/10 Pilot "Jack" |
1 x | Extinguisher CO2 - 2 Kg |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Round Rod 1,0x1000 mm |
1 x | Propeller Pleg CAM Carbon 20x10 |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Ball link M2 (10 pcs) |
1 x | 6 mm M3 variable horn |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Servo TOPMODEL DS9010 T |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Oracover White 2 m |
1 x | Hobbylite Filler, Balsa colour |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Blind nut M8 (10 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Angle of incidence meter |
1 x | Horn with ball 40x30 |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | 1000 ml sealer (DOPE) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Balsa panel 10x100x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Bag connector 2 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | PIX Hawk with accesories |
1 x | Hitec 52 mm servo arm |
1 x | Red smoke canister 100 g |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | ABS tube 8.0x6.0x1000 mm |
|
18,508.34EUR |