130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x 290 mm M4/4 mm Prop shaft
1 x Blind nut M6 (4 pcs)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x 2 LiPo XH>EH adapter
1 x PPM Encoder Module
1 x 10 mm floating pad (72 pcs)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Green smoke canister 100 g
1 x 15 mm floating pad (30 pcs)
1 x 50 mm white plastic spinner for fixed propeller
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Beech dowels 3.0 x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Pin hinge 26x11 mm (10 uds)
2 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x Carbon fiber rod 16 mm x 1000 mm
1 x Extension silicon 30 cm male (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Propeller balancer
2 x Flap hinge (6 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x Buy Perforated film 100 cm / 50 m
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Cable S.BUS 3 salidas 100 mm
1 x Propeller balancer
2 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Truck-trailer for gliders 720 x 285 mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Extension 7.5 cm
2 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x 1/6 Pilot "Tony"
1 x Interface Jack Adapter IKARUS
1 x Horn 6/27 with M3 Bearing
1 x Cable set PREMIUM, fuselage/wing
1 x Joint with bearing M3 22x5,5
2 x Civilian pilot "Curt" size 9cm (Slimline)
2 x 5 line servos wire black (1 m)
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x 6 mm Quick clamp_S (10 pcs)
1 x Horn DUBRO 1/2A
1 x Ball link M3 (10 pcs)
1 x Plasti Dip Liquid Tape 429 ml black
1 x 1/12 Pilot "Tom"
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Bird (Aero-naut)
1 x Motor A50-14L Turnado V3 Glider
1 x AXI 2814/16 V2
1 x AXI 2820/12 V2 Long
1 x Adpater for mounting VMKG gearbox in 480 motor
1 x AXI 2820/10 V2 Long
1 x Axle for motor A30-XL V2
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x AXI 2808/24 V2
1 x Shaft for A60-L (140mm)
1 x Actro 32-3 Heli MAX 5mm
2 x AXI 2814/6D V2
1 x Shaft for A60-20/22/24S (120 mm)
1 x Motor A50-12 L V4
1 x Motor A30-12 L V4
1 x USB Mini Camera endoscope
1 x Axle for motor A20-S (3 uds)
1 x AXI 4120/14 V2
1 x Motor Advance 50-6
1 x Shaft for A60-XS-V2 (112,5mm)
1 x AXI 2820/12 V2
1 x Motor Advance 30-10 F3A
1 x AXI 2808/16 V2 Long
1 x AXI 2820/10 V2
1 x AXI 2217/12 V2
2 x Motor A20-26 M EVO
1 x Motor A200-6
1 x AXI 2814/20 V2
2 x AXI 2808/20 V2
1 x Motor A50-16 S V4
1 x Size "M" motor holder for class 400
1 x AXI 2814/16 V2 Long
1 x AXI 2820/8 V2
1 x Shaft for A60-L V4
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Motor holder for AC 28/7
2 x Radial mount for electric 2.5-5.6
1 x Motor A10-7 L 4,4:1
1 x Hacker A30-S Radial Set
1 x Motor Mega AC 16/15/03
1 x MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Spinner propeller pleg. 40 mm / 3,0 mm
1 x Long pinned hinge (6 uds)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Fiberglass plate 350x150x3.0 mm
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Foam plastic plates (310x210x8 mm)
1 x Carbon plate 350x150x1.0 mm
1 x Carbon plate 350x150x5.0 mm
1 x Gates hinge aluminium (1 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Spinner propeller pleg. 30mm axle 3,0 mm
1 x Small pinned hinge (12 uds)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x Fiberglass plate 350x150x2.5 mm
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x PowerBox Smokepump JETs 2x outside
1 x Horn 5/10 with M2 Bearing
1 x 30 cm MULTIPLEX female connector
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Cable with accesories
1 x Horn 6/20 with M3 Bearing
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x Fiberglass plate 350x150x1.0 mm
1 x Carbon plate 700x550x0.5 mm
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Micro flex hinge (12 uds)
1 x Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Spinner propeller pleg. 30 mm / 3,2 mm
1 x Large flex hinge (12 uds)
1 x Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Aluminium sheet 500x250x0,5mm
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Carbon plate 550x350x4.0 mm ECOTECH
1 x Styrene plate 320x120x0.5 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Carbon plate 350x150x2.5 mm
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Spinner Alumin. propeller pleg. 30 mm / 3,0 mm
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 25 mm reinforced hinge
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Foam plastic plates (310x210x5 mm)
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Foam plastic plates (310x210x3 mm)
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x Carbon plate 350x150x2.0 mm
1 x Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Interface Realflight Simulator
1 x Slave-cable USB Easy Sim
1 x Crimping tool
1 x EasyFLY Addon
1 x RF9 Flight Simulator with Spektrum Controller
1 x Conector JR Servo female (50 pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Conector JR Servo male (50 pcs)
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Horn 5/20 with M2 Bearing
1 x Smoke Oil Blue 5 l
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Adapter lead MPX/EC3
1 x 50m servo "Premium" wire (white/red/blue)
1 x Conector JR Servo male (10 pcs)
1 x Extension for SensorSwitch 30cm
1 x Extension for LC-Display 50cm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x 100m servo "Premium" wire (white/red/blue)
1 x BlueCom™ Adapter (Android / WP)
1 x Extension for SensorSwitch 60cm
1 x SlowFlyer control horn (3 pcs)
1 x Brass control horn M2 short for wire (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Brass control horn M4 short for wire (10pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Pilot "Goose" (Slimline)
1 x Pilot JAN 1/4 Saiplanes
1 x Piloto JET 1:3,5
1 x 1/6 Pilot "Buddy"
1 x 1/4 Pilot "Mike"
1 x ABS tube 5.0x4.0x156 mm
1 x Axle for AXI 2217/xx motors
1 x AXI 2814/10 V2
1 x VM 2020/20 rear
1 x Motor A200-8
1 x AXI 2826/6 V2
1 x AXI 2826/12 V2
1 x AXI 2826/6 V2 Long
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x Frontal Adapter for AXI53xx
1 x AXI 2808/24 V2 Long
1 x Cable set Premium™ MAXI "one4two"
1 x Brushes for VM 2014, 2020, 2028 motors
1 x AXI 2814/12 V2 Long
1 x Motor A40-10 L V2 14-Pole Glider
11,707.07EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies