130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 41x5,5 mm wires output (2 pcs)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Cockpit aluminium closing
1 x 11 mm Rubber pads (14 pcs)
1 x Cable grommet 9.5 mm (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Cable grommet Ø 5 mm (4 uds)
2 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x 140 mm rods + T patellas set for direction control
1 x 38x4,5 mm wires output (2 pcs)
1 x 28x5 mm wires output (2 pcs)
1 x 45 mm rods + T patellas set for direction control
1 x Allen wheel collar M3x3
2 x 100 mm rods + T patellas set for direction control
2 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Cable grommet Ø 4 mm (4 uds)
2 x 100 mm rods set for direction control
1 x Allen wheel collar M4x4
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 250 mm / 16 mm Airbrakes
1 x 90 mm rods + T patellas set for direction control
3 x Cable tie mounts 4.3 (4 uds)
2 x Canopy Lock V1 M3 Red (2 pcs)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x LUCAS pilot ARTF
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Parachute BACKUP X100
1 x Set cintas unión paracaídas 145 cm
2 x Trike XL motor set (motor+esc+prop)
1 x Wing OXY 0,5 pulgadas2
2 x Para-RC Mix
2 x Parachute PV6 for F3J
1 x Ballast 700gr OPALE
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor BackPack XXS 2
1 x Opale Rucksack
2 x Paramotor BackPack XXS (without accessories)
3 x ABS Strip 1.5x2.0x1000 mm
2 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
2 x ABS Strip 1.5x8.0x1000 mm
2 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Field folding model stand
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x SlowFlyer control horn (3 pcs)
2 x Horn 16,5x20 mm (2 pcs)
2 x LH long black aluminium horn L31xH30 (2pcs)
1 x Brass control horn M4 short for wire (10pcs)
2 x 6 mm red aluminium threaded horn with patella
2 x Angle of incidence meter
2 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
2 x Truck-trailer for gliders 720 x 285 mm
2 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Brass control horn M3 short for wire (2 pcs)
2 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Propeller balancer
2 x LH long aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x WingFix ULTRA Black Edition
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Horn 6/35 with M3 Bearing
1 x Field folding model stand SebArt
1 x Truck-trailer for gliders 720 x 239 mm
1 x Small aluminium horn gold (2pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Cable control set
3 x Small aluminium horn blue (2pcs)
2 x Horn 13,5x16 mm (2 pcs)
1 x Horn 6/27 with M3 Bearing
1 x 6 mm blue aluminium threaded horn with patella
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
2 x Propeller balancer
1 x Horn 5/10 with M2 Bearing
1 x Stainless steel cable Ø 0.5 mm (10 m)
2 x Canopy Latch
1 x Short ball link M2 (6 uds)
1 x Prolongador S-Bus JR/JR 20cm
1 x Glases Aspen
1 x Premium servo extension 75cm
2 x Cable grommet Ø 3.2 mm (4 uds)
1 x Albatros ,spare fuselage (Top Model)
1 x Cabin latch Fox MDM1 4m (pair)
3 x Windsock Ozone L - 700 mm
2 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Paramotor Trike XL
1 x Windsock Ozone L -1200 mm
1 x MAX pilot ARTF
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Allen wheel collar M4x6
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Propeller POWER-PROP 7x7
1 x Birch plywood plate 600x300x1.5 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
2 x Optical RPM Sensor
1 x Micro control horn T2 Ø 1
1 x Micro control horn (2 pcs)
1 x Medidor ángulos y/o incidencias
1 x Wheel collar 2 mm Ø (4 uds)
1 x SUS wire 3m (nylon coated)
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Wheel collar 6 mm Ø (4 uds)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Pushrod greyline 4/3 with coupler M3
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Pushrod greyline 3/2 with coupler M2
1 x Press fitting for 0,5 diam. steel cable (10 pcs)
1 x Snap pin for micro clevis (10 uds)
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x DYNAMOMETER S-1580
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Small aluminium horn red (2pcs)
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Switch Cap L (black)
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x Wheel collar 5 mm Ø (4 uds)
1 x Frontal support Speed 600
1 x Fan for A60
1 x Wing OXY 5,0 m2
1 x Wheel collar 4 mm Ø (4 uds)
1 x Aramid 50 daN 50 m
1 x Motor holder AXI
1 x Indoor motor holder
1 x Cooler motor type 280
1 x Combo AM480 T-Motor 650 Kv
1 x L-39 Albatros 138"/3.5m lenght ARF
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x Propeller MASTER 6x3,5
1 x Propeller MEJLIK 20x8 CFK
1 x 12x6 tree blades propeller
1 x 26x8 BIELA propeller
1 x 19x8 BIELA propeller
1 x 28x16 BIELA propeller (3-blades) Corsair Scale
1 x ABS tube 10.0x8.0x1000 mm
1 x Propeller MASTER 7x5
1 x Propeller POWER-PROP 16x8
1 x Propeller MASTER AIRSCREW 9x6
1 x Propeller MEJLIK 23x8 CFK
1 x 8x6 tree blades propeller
1 x Propeller MASTER 7x6
1 x Helice CLASSIC-Prop 20x10
1 x Propeller MASTER 5,5x4
1 x Propeller MEJLIK 18x8 CFK
1 x MASTER 16x10 tree blades propeller
1 x Futaba 54 mm servo arm with ball link
1 x Ball link M3 (10 pcs)
1 x 5 mm M2 variable horn
1 x Pushrod octagone 4/3
1 x Pushrod octagone 3/2 with coupler M2
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Snap long M2 (10 uds)
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Horn DUBRO 1/2A
1 x Cooler motor type 150
1 x Round Rod 4,0x1000 mm
1 x 22x10 BIELA pusher propeller
1 x 16x10 BIELA propeller (3-blades)
1 x 28x12 BIELA 3Bl Pusher propeller
1 x Strip 2,0x2,0x330 mm
1 x 25x14 4Bl Scale
15,328.49EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies