130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Aluminun wheel collar 2 mm Ø (4 uds)
2 x Aluminun wheel collar 2.5 mm Ø (4 uds)
2 x Cockpit aluminium closing
3 x Cable grommet 9.5 mm (4 uds)
3 x Cable grommet Ø 3.2 mm (4 uds)
4 x Cable grommet Ø 6.4 mm (4 uds)
3 x Aluminun wheel collar 5 mm Ø (4 uds)
3 x Aluminun wheel collar 3.5 mm Ø (4 uds)
3 x Allen wheel collar M4x4
1 x 250 mm / 16 mm Airbrakes
3 x Aluminium alloy coupler for carbon tube 6/M4
3 x Cabin latch Fox MDM1 4m (pair)
2 x Aluminun wheel collar 3 mm Ø (4 uds)
2 x Cable grommet Ø 4 mm (4 uds)
3 x 38x4,5 mm wires output (2 pcs)
2 x Allen wheel collar M3x5
2 x Cable grommet Ø 5 mm (4 uds)
4 x Allen wheel collar M3x3
1 x Aluminun wheel collar 6 mm Ø (4 uds)
4 x 140 mm rods set for direction control
2 x Allen wheel collar M4x6
2 x 45 mm rods + T patellas set for direction control
3 x Cable tie mounts 4.3 (4 uds)
3 x Clip mini fixing for wing (2 pcs)
1 x 11 mm Rubber pads (14 pcs)
2 x 80 mm rods set for direction control
2 x 140 mm rods + T patellas set for direction control
2 x 45 mm rods set for direction control
1 x 100 mm rods + T patellas set for direction control
2 x 90 mm rods + T patellas set for direction control
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x Canopy Latch
1 x Cap closure 33/23.5mm (2 uds)
1 x 41x5,5 mm wires output (2 pcs)
2 x Canopy Lock V1 M3 Red (2 pcs)
1 x 100 mm rods set for direction control
2 x Cierre cabina aluminio Ø4, I=10 mm
2 x Hovercraft sailcloth
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
4 x Steering arm 16 mm Ø 4 mm
2 x Wheel collar 5 mm Ø (4 uds)
3 x Steering arm 16 mm Ø 3 mm (2 uds)
3 x Tip wing protector 28x10x12 (2 pcs)
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
2 x Steering arm 12 mm Ø 4 mm (2 uds)
2 x Steering arm 12 mm Ø 4 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Tip wing protector 40x14 (2 pcs)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Wheel collar 4 mm Ø (4 uds)
2 x Wheel collar 3 mm Ø (4 uds)
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Brass rod Ø 1.5 mm x 1000 mm
2 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Landing gear frontal support 25x32x16
2 x LASER 73" 1.85m (05) PILOT
1 x Propeller POWER-PROP 14x9 Izda
1 x Split M1,2x10 (10 pcs)
1 x Lead with adhesive (2 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Split pin 1.6x16 mm (10 uds)
1 x Cockpit plastic closing
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x FALCON 20X9 CARBON PROPELLER (GAS)
2 x Stickers-digit for marking
1 x 3 LiPo XH>EH adapter
1 x Flap hinge 33x9 mm (6 pcs)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
2 x Landing gear frontal support 29x26x13,5
1 x 2,3 mm Prop Adapter M5
1 x Support Filtro FESTO
1 x 12 mm dogdrive props
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Adapter 4,0 mm M6
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x PIX Hawk with accesories
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x LOWER TOW HOOK
1 x Window mounting channel 5m
1 x Control for forward wheel (MINI)
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Screws M1,6x6 Allen
1 x Screws flush mount M2
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Strip 1,5x1,5x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x One touch canopy lock
1 x Oracover GREY Seafire Sea 2m
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x GameCommander USB Universal
1 x Wheel collar 3.5 mm Ø (4 uds)
1 x Propeller APC 14x8.5 Electric Pusher
1 x SERVO HOLDER
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Motor KAVAN PRO 2225-1600
1 x Clip fixing for wing (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Snap pin for micro clevis (10 uds)
1 x Side rudder
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Interface Realflight Simulator
1 x EasyFLY Addon
1 x 
1 x RF9 Flight Simulator with Spektrum Controller
1 x Slave-cable USB Easy Sim
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x SIMtransmitter 6 Mode 2
1 x F450/550 Quadcopter, landing gear
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x APM2.6 Power module with 5.3V DC BEC
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Round Rod 2,5x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x ABS Strip 1.5x8.0x1000 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Connectors banna oro 3,5 mm (M/F)
1 x CNC FPV Display screen&Transmitter Holder Vertical
3,778.23EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies