130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler M3 (10 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Ball link Aluminio M3 (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Angled clevis with threaded rod M3
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x PT 20x13 EL Propeller
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Cabel charger transmitter GRAUPNER
1 x TP/TopFuel - XH 2/3S Adapter
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x CM-3
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 1/4 Pilot "Mike"
2 x BEC 3A FOXY
1 x APM2.6 Power module with 5.3V DC BEC
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x CC 03
1 x Piloto Jet "Green" 1/6 Scale
1 x Pilot JAN 1/4 Saiplanes
1 x USB HLS prog. interface
2 x Adapter lead MPX/EC3
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x JETImodel SINGLE BEC
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Pilot "Dick" Legends Series (Slimline)
1 x 3 LiPo XH>EH adapter
2 x 30 cm BEC cable (female)
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x 1/6 Pilot "John"
1 x Dean "T" - Futaba Adapter
1 x 4 LiPo XH>EH adapter
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Steering arm 16 mm Ø 3 mm
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
3 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Stainless steel cable Ø 0.5 mm (2 m)
3 x Cierre cabina aluminio Ø4, I=10 mm
1 x Locking cable tie 2.5x100 (uds)
2 x 9x4.7 * 22x12 carbon propeller
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Xoar Electric Beechwood Prop 22x10
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Long pinned hinge (6 uds)
1 x Green smoke canister 100 g
2 x Yellow smoke bombs AX-60 (5 pcs)
2 x Female connector for 10 pines AWG
1 x EWC3 40 cm wing connector
1 x DPSI Ampere battery backer
2 x EWC6 40 cm wing connector
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Female connector for 6 pines AWG
1 x Extension 2/3 lipos JST - JST/C
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Extension 2/3 lipos JST/C
1 x Electronic switch JETI SP6 0-15v/6A
1 x Hacker X-Pro USB interface V2
2 x CC 05
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 1/12 Pilot "Tom"
1 x UBEC 6A KAVAN
1 x 1/6 Pilot "Garry"
1 x SPS 70V 140/280 A
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Canopy Latch
1 x 11 mm Rubber pads (14 pcs)
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Allen wheel collar M4x6
1 x Tip wing protector 30x10 (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x 45 mm rods + T patellas set for direction control
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Cable grommet 9.5 mm (4 uds)
1 x Cabin latch Fox MDM1 4m (pair)
1 x 100 mm rods + T patellas set for direction control
1 x Aluminun wheel collar 6 mm Ø (4 uds)
2 x JR silicone servo wire 0,35 qmm / 5m
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
2 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Locking cable tie 3.2x142 (uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x White silicone 0,25 qmm wire (150 m)
1 x 6 mm aluminium horn with patella
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Horn 6/27 with M3 Bearing
1 x Horn for flap control (1 pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Brass control horn M4 short for wire (4 pcs)
1 x 5 mm M2 variable horn
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x 20 mm carbon horn
1 x Brass control horn M2 short for wire (2 pcs)
1 x Shirt Hispano Aviación
1 x Cap Hispano Aviación
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Horn 5/20 with M2 Bearing
1 x Horn 6/20 with M3 Bearing
1 x Cable control set
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Control horn long w/ball
1 x Set propellers 5x3 Multicopter (2cw+2ccw)
1 x Set propellers 10x4.5 SF Carbon Multicopter
1 x Servo AN-8 HBA
1 x Futaba 38 mm servo arm
1 x Antonov AN2 Scale 1/6 - 3m
1 x Futaba 14/20 mm servo pull-pull double arm with ball link
1 x Futaba 54 mm servo arm with ball link
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Futaba 76/92 mm servo pull-pull double arm with ball link
1 x ALU double servo arm 3 mm shaft
1 x Extension MPX-MPX 20 cm
2 x METEOR 1.000 mm kit
1 x Hitec 25 mm servo arm with M3 ball link
1 x Futaba 38 mm servo arm with ball link
1 x Futaba 25 mm servo arm with M3 ball link
1 x Futaba 52 mm servo arm
1 x 54 mm Futaba servo arm tandem with ball link
1 x Futaba 2x20 mm servo double arm
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Futaba 30 mm servo arm with M3 ball link
1 x Futaba 20 mm servo arm
1 x Hitec 25 mm servo arm with ball link
1 x "L" servo arm 65x49 mm (2 pcs)
1 x XTorque CFK Servohebel 38
1 x HITEC 20 mm servo arm with ball link
1 x Hitec 38 mm servo arm
1 x Hitec 20 mm servo arm
1 x Hitec 52 mm servo arm
1 x Hitec 46 mm servo arm with ball link
1 x Futaba 25 mm servo arm with ball link
1 x Hitec 30 mm servo rounded arm
1 x 46 mm Futaba servo arm tandem with ball link
1 x XTorque CFK Servohebel 38 HITEC 25T
1 x Futaba 17 mm servo arm with ball link HITEC
1 x Adapter rotula M3
1 x Hitec 38 mm servo arm with ball link
1 x 17 mm servo arm with ball link DES Graupner
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Futaba 46 mm servo arm with ball link
1 x Conector MR-60 (pareja)
1 x Jet Pipe for ULTIMATUM 2m
1 x Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x SPARK Switch 5.9v
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Male connector for 16 pines AWG
1 x PWC4 wing/fuselage connector for 4 servos
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x Avia spare blue cockpit (Top Model)
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x CC 01
1 x CC 02
1 x 1/6 Pilot "Buddy"
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x JETImodel DPS 40
1 x SPARK Switch 12v
1 x Extension 5 lipos JST - JST/C
1 x SBEC 40
1 x Prolonguer for Balancer Thunder Power 6S
1 x Opto Gas Engine Kill Switch
1 x Selfstart electronic switch
1 x PSC 6
1 x Male connector for 6 pines AWG
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x MPX-Dean "T" Adapter
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Female connector for 20 pines AWG
1 x JETImodel Addcap 1640
1 x SPARK Switch 7.4v
1 x Electronic switch JETI SP06 Opto
1 x Female connector for 12 pines AWG
1 x MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x BULLIT Wing 1095 mm
1 x 58 mm micro servo cover
1 x ARTIST 1.560 mm
1 x ULTIMATUM 2.0 m orange/blue
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x ULTIMATUM 2.0 m green/black
1 x ULTIMATUM 2.0 m yellow/blue
1 x TMM 2512-3S heli
1 x TMM 1210-3S heli
1 x Prop CAM-Carb-Light 8x4,5"
1 x CAM-Carbon Light Prop 9x6"
1 x Landing gear frontal support 25x32x16
1 x 20x13 Falcon electric carbon prop (64g)
1 x 20x15 Falcon electric V2
1 x LiPo Storage Box Type "BIG"
1 x MAMBO 17
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x 10 mm Quick clamp_L (6 pcs)
1 x Remote electric ignition system
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Snap long M2 (10 uds)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Pilot "Anthony" (Slimline)
1 x 1/4 Pilot "Heidi"
1 x CAM-Carbon Light Prop 10x6"
1 x CAM-Carbon Light Prop 10x7"
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x 
1 x Indoor Brushed motor kit
1 x Albatros ,spare cockpit (Top Model)
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x AX-60 starters (5 pcs)
1 x Rocket D3-P
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x White smoke bombs AX-9 (10 pcs)
1 x AX-60 starters (5 pcs)
1 x Plastic caps for AIR BURTS (30 pcs)
1 x White smoke bombs AX-18 (5 pcs)
1 x White smoke bombs AX-3 (10 pcs)
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Red smoke bombs AX-60 (5 pcs)
1 x Ventral support for AX-18/AX-60
1 x Black smoke bombs AX-60 (5 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x Parachute expulsion foam
25,986.99EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies