130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Big Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x Small Crow DLE-170M
1 x Motor DLE 200cc Premium Muffler
1 x Motor DLE 200cc Std
1 x Servo NARO Max Std
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Hovercraft sailcloth
3 x Silent-blocks DLE 170M
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Towing hook <3m
1 x Lock washer 3.2 mm (20 pcs)
1 x ABS tube 3.0x2.0x330 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Angle measurer
1 x ABS tube 7.0x5.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
2 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Stainless steel cable Ø 0.5 mm (20 m)
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
2 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Piloto JET 1:3,5
3 x 1/12 Pilot "Fighter"
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Round Rod 3,0x1000 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Xplorer3 anemometro
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Monokote ROJO misil (1.8x0.65m)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Oracover Azul Cielo 2 m
1 x 19 mm 2:1 black termoretract tube
1 x 10 mm Quick clamp_L (6 pcs)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Canister combo DLE 120 cc
1 x Gasket set DLE-30
1 x Gasket set DLE-20
1 x Carburetor DLE 170
2 x Carburetor DLE 20
1 x Gasket set DLE-55
2 x Gasket set DLE-120
1 x Canister combo DLE 170 cc
1 x DLE 85 / DLE111 / DLE120 Prop Washer
1 x Carburetor DLE 30
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x PIX Hawk with accesories
2 x 1/6 Pilot "Tony"
2 x 1/12 Pilot "Langley"
1 x Split M1,2x10 (10 pcs)
1 x DYNAMOMETER S-1580
1 x Stickers-digit for marking
1 x Optical RPM Sensor
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Battery plate
1 x LA500 housing-upper cyclic
1 x Head core
1 x Head lower part
1 x 1/12 Pilot "Tom"
1 x Control for forward wheel (MINI)
1 x 28x5 mm wires output (2 pcs)
2 x Vasa model Catapult
1 x Allen wheel collar M3x5
1 x Bungee HLG Premium
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Snap pin for micro clevis (10 uds)
1 x Allen wheel collar M3x3
1 x Locking cable tie 2.5x100 (uds)
1 x Allen wheel collar M4x6
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Snap for floding prop for 2 mm axi
1 x Landing gear frontal support 25x32x16
1 x Snap long M2 (10 uds)
1 x Cable grommet Ø 5 mm (4 uds)
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Canopy Latch
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cockpit plastic closing
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Lead with adhesive (2 pcs)
1 x Cable grommet Ø 4 mm (4 uds)
1 x Split pin 1.6x16 mm (10 uds)
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x 1/6 Pilot "Cindy"
1 x ABS Strip 1.0x4.0x1000 mm
1 x 1/6 Pilot "Buddy"
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Pilot "Goose" (Slimline)
1 x Pilot JAN 1/4 Saiplanes
1 x 1/10 Pilot "Jimmy"
1 x Round Rod 1,0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 1/6 Pilot "Garry"
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Piloto Jet "Green" 1/6 Scale
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Round Rod 2,5x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Pilot "Duke" Legends Series (Slimline)
1 x 1/12 Pilot "Cougar"
1 x Strip ABS 2.0x5.0x1000 mm
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x ABS Strip 1.0x5.0x1000 mm
1 x 1/7 Pilot "Japanese"
1 x Piloto jet 130 mm
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Blade holder lower
1 x Head runner
1 x Grub screw M3x3 shouldered (2 pcs)
1 x LA500 pre-rotation gear hub
1 x Bearing 3x6x2,5
1 x Balls 4 mm
1 x Head lower part New
1 x LA500 freewheel bearing
1 x LA500 nose
1 x LA500 Blades
1 x LA500 Autogyro
1 x LA500 pre-rotation gear
1 x Bearing housing
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x DLE 55-RA Muffler
1 x DLE-55RA Ignition unit
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x DLE 55 Ignition unit
1 x 15 mm floating pad (30 pcs)
1 x DLE Ignition 111/120/170
1 x CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x Needle bearing DLE55-RA
1 x 12x8 tree blades propeller
1 x 28 mm turnbuckle
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x Modulo reglaje avance V3
1 x 3 mm Prop Adapter M6
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium battery holder red
1 x Aluminium wide washer M3 blue (4 pcs)
1 x DLE 111 Old Crankshaft keyway
1 x CILINDER FOR DLE55, DLE111, DLE222
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x DLE 55 Muffler
1 x Cilinder DLE 30 - DLE 60
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x DLE 85 Ignition unit
1 x 11 mm Rubber pads (14 pcs)
1 x 6 mm Quick clamp_S (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x PROPELLER SCREW SET FOR DLE120 (6PCS)
1 x DLE 85/111/120 Crankshaft keyway
1 x 3.2 mm Prop Adapter M8
1 x "L" servo arm 65x49 mm (2 pcs)
1 x 3 mm Leader (L 100 mm)
1 x Sparkplug DLE CM6
1 x Piston DLE 30 - DLE 60
1 x 250 mm / 16 mm Airbrakes
1 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x Copier 5x20 cm pcs
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 
1 x 2,0x50 mm allen screwdriver
1 x BALSA trip 2.0x10.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x 
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Blind nut M6 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Blind nut M5 (10 pcs)
1 x PT 22x10 EL Propeller
1 x Crimping tool
1 x Starter 12v (Max 90 and 15ccm)
1 x BALSA triangular 10x10x1000 mm
23,268.00EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies