Inicio » Catálogo » FPV » Monitores-Gafas FPV » ROIEV800D

130.00EUR

Gafas FPV Eachine EV800D
[ROIEV800D]

Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP
A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)

pocas unidades

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Manga viento Ozone S - 700 mm
1 x	Paramotor BackPack XXS 2
1 x	Paracaídas PV6 para F3J
1 x	Piloto MAX ARTF
2 x	Manga viento Ozone L -1200 mm
1 x	Paramotor BackPack XXS (sin accesorios)
1 x	Paramotor Trike XL
1 x	Vela OXY 5.0 m2
1 x	Paracaídas de seguridad 1,8 m2
1 x	Piloto LUCAS ARTF
1 x	Para-RC Mix
1 x	Paracaidas BACKUP X100
1 x	Motorización Trike XL (motor+regulador+helice)
3 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
1 x	Rótula M3
2 x	Rótula con rodamiento M3 22x5,5
2 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
2 x	Rótula V2 M2,5 5Diam negra (2 pcs)
2 x	Rótula metálica M2/2 azul (2 pcs)
2 x	Rótula M3 RPA's-UAV's
2 x	Rótula con rodamiento M2 22x5,5
2 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
2 x	Rótula M3 con tornillo y tuerca(6 uds)
2 x	Rótula larga M1.6 con bola/base (6 uds)
2 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
2 x	Rótula M3
2 x	Rótula larga M2 con bola/tornillo (6 uds)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
2 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
2 x	Rótula con bola plana M3 (10 pcs)
1 x	Rótula 6 mm con bola M3 (10 pcs)
3 x	Rótula corta M1.6 con bola/base (6 uds)
2 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
2 x	Rótula metálica M3/3 azul (2 pcs)
3 x	Chaleco Hispano Aviación
1 x	Chaqueta Hispano Aviación
2 x	Gorra Hispano Aviación
2 x	Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
2 x	Liston ABS 1,5x2,0x1000 mm
2 x	Liston ABS I 3,5x1,75x330 mm
1 x	Motor DLE 200cc Premium Muffler
1 x	Liston ABS 1,5x4,0x1000 mm
2 x	Corona pequeña autoarranque DLE-170M
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Motor DLE 200cc Std
1 x	Varilla ABS 4,0x1000 mm
2 x	Liston ABS 1,0x5,0x1000 mm
2 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Liston ABS I 20x10x1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Crimpadora
1 x	Barra pegamento caliente Verde
1 x	Alicate para hacer "Z"
2 x	Destornillador allen 2,0x50 mm molibdeno
1 x	Barra pegamento caliente Rojo
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Destornillador Torx® TX6
1 x	Arrancador 12v (Max 90 and 15ccm)
1 x	Destornillador allen 3,0x60 mm molibdeno
1 x	Bascula precision 0.1-2000 g
2 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Copiador 2 unidades de 20 cm
1 x	Alicate para "Ball-Link"
1 x	Destornillador allen 1,5x50 mm molibdeno
2 x	Corta tubos aire
1 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Barniz Tensor 1000 ml
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Ballast 700gr OPALE
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
1 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Rótula V2 corta M2 5Diam negra (2 pcs)
2 x	Gafas FPV Eachine EV800D
2 x	Destornillador allen 2,5x60 mm molibdeno
3 x	Liston ABS 1,0x4,0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Helice FALCON 32,5x11 PUSHER Carbono
1 x	Piloto 1/4 "Mike"
1 x	Piloto 1/6 "Tony"
1 x	Aramid 50 daN 50 m
1 x	Rótula corta M2 con bola/tornillo (6 uds)
1 x	Alicate para "Ball-Link"
1 x	Medidor de ángulos digital para helicóptero
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
2 x	Soporte lija 25 mm
1 x	Plastilina para moldeado (1 Kg)
1 x	Rueda 102x26 centro aluminio Ø6.0 mm
2 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
2 x	Rótula M1.6 con tornillo y tuerca (6 uds)
1 x	Gafas Aspen
2 x	Gafas Nimbus "Black"
2 x	Motor DLE 170 M - Paramotores
1 x	Gafas Nimbus
1 x	Silent-blocks DLE 170M
1 x	Freno de rueda para ruedas de 140 mm de diámetro
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Fibra vidrio 80g/m2 (100cm x 1m) cruzada
1 x	Plancha termoformable 0,3 mm (0,039") DIN A4
1 x	Plancha PVC 320 x 194 x 0,23 mm (marrón)
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Plancha estireno 320x120x0.5 mm
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Conexión alas 2 servos Futaba 50 cm
1 x	Disipador motor tipo 300
1 x	Disipador motor tipo 400
1 x	Gafas Innovation Plus
1 x	Varilla ABS 1,0x1000 mm
1 x	Gafas Stratus
2 x	Gafas Ace
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Tubo bomba vacio 8/6 mm transp. (25 m)
1 x	Bascular < 40 Kg
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Mango para lima PERMAGRIT
1 x	Tijeras curvas 16cm - GFK/CFK/Aramid
1 x	Hoja sierra PROXXON (50mm-20T) para KS-230
2 x	Set brocas PROXXON 0.5-3.2mm (10 pcs)
1 x	Disco Corte Proxxon/Dremmel 22 mm
1 x	Soldador 100W/200V
2 x	Perforador hélices para EME35 y DLE35
1 x	Copiador 5 unidades de 20 cm
2 x	Set Perma-Grit "Fine" 7 piezas
1 x	Perforador hélices DA-85/100/120/150/200 y VM 60-210
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x	Bomba de vacio P1-N
1 x	Mini-clip
1 x	Molde conector MPX V1
1 x	Rótula con bola M2 (10 pcs)
1 x	Plancha estireno 320x120x1.0 mm
1 x	Repelente agent PVA 250 ml
1 x	Fibra de vidrio 49 g/m² (1,10 x 1m)
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Plancha fibra vidrio 350x150x1.5 mm
1 x	Plancha de goma espuma (310x210x8 mm)
1 x	Manga de fibra de vidrio Ø 20 mm x 5m
1 x	Plancha de goma espuma (310x210x2 mm)
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Rótula MAXI sin bola M3 (2 uds)
1 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Rótula V3 aluminio M3/5 Diam con base corta (2 pcs)
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Soporte CNC para pantalla FPV smitter Holder Vertical (Soportes

15,341.07EUR