130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip 2,5x1,25x330 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x 2,0x50 mm allen screwdriver
1 x Dust collector for mould cleaning
1 x Screwdriver for Hexagon 1,27mm
1 x Digital scale up to 40 kg
1 x Xplorer3 anemometro
1 x Xplorer4 anemometro
2 x Hot Glue Stick BLACK
1 x Ball Link Plier
1 x Hot Glue Stick GREEN
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Starter 12v (Max 180 and 30ccm)
1 x Z Bender - S Type Tool
1 x 
1 x Crimping tool
3 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Starter EM Gear Power 250
1 x Starter Sullivan-STAR 601
1 x Vacuum pump P1-N
1 x Xplorer2 anemometro
1 x Hot Glue Stick RED
1 x Starter EM Gear Power 80
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Copier 5x20 cm pcs
1 x Xplorer1 anemometro
1 x Vacuum pump 12 CFM
1 x 1,5x50 mm allen screwdriver
1 x Cut tube
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Tape GFK 25 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 450 mm (2 pcs)
2 x Foil for sticking flaps and ailerons
1 x SE Ring 360 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 350 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 20x200 mm battery rings
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Spikes Band (5 m)
1 x 20x1000 mm Ring Strap Back To Back
1 x Tape GFK 38 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 480 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Cinta Goldfix 1m
1 x Tape GFK 50 mm
1 x Interface Realflight Simulator
1 x Slave-cable USB Easy Sim
1 x Interface Jack Adapter IKARUS
1 x EasyFLY Addon
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 20 g tin paste
1 x Hobbylite Filler, Balsa colour
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Round Rod 2,5x1000 mm
1 x AX-60 starters (5 pcs)
1 x BALSA trip 5.0x5.0x1000 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Short ball link M1.6 (6 uds)
1 x Support pump Xicoy X45
2 x Z Bender - S Type Tool
1 x Tool for entel
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x 3,0x60 mm allen screwdriver
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Rubber Insert soft, 1 Pcs.
1 x Ball Link Plier
1 x Screwdriver for Torx® TX6
1 x Crimping tool
1 x Sealing Iron Profi LCD
1 x Pump hose (Ø 6/8 mm) transparent
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Rubber Insert hard, 1 Pcs.
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Copier 2x20 cm pcs
1 x Flap hinge (6 pcs)
1 x Large flex hinge (12 uds)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 15 mm reinforced hinge
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 1/10 Pilot "Jimmy"
1 x Piloto jet 130 mm
1 x Piloto Jet "Red" 1/6 Scale
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Female connector for 10 pines AWG
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Connector Sub-D 2+5 Male
1 x EWC3 100 cm wing connector
1 x Male connector for 6 pines AWG
1 x SE Ring 400 mm (2 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Fundas para el transporte F3A alas
1 x Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Ball Bearing Oil 25 ml
1 x ZEUS F3A 2m
1 x Connector CAN 15
1 x 10 mm Prop Adapter M12
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x VBar Control RX-Satellite
1 x VBar Control Touch, midnight black
1 x Miniature brass strap hinge, 1 m
1 x Pin hinge 26x11 mm (10 uds)
1 x Medium pin type hinge (12 uds)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Female connector for 20 pines AWG
1 x Extension 5 lipos JST/C - JST
1 x Interruptor RX/Batterie
1 x FX three-position switched channel, long
1 x Ventus 1:4 set of instruments
1 x Propeller POWER-PROP 11x9
1 x Porpeller HUNTER 400
1 x Propeller electric carbon 8.5x7
1 x 4 mm Prop Adapter CN-Spinner
1 x SCHARNHORST accessories
1 x 5 mm Prop Adapter CN-Spinner
1 x 3,2 mm Prop Adapter M6
1 x 2.3 mm Adapter for 30 mm spinners
8,454.84EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies