130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Kwik link with arm M3xM2xL24
1 x Cable coupler M2,5 (2 pcs)
1 x Cable coupler M3 (10 uds)
2 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x Black large kwik link (10 pcs)
2 x Kwik link with arm M5xM2,5xL30
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
2 x Aluminium red ball links M3 V1 (10 pcs)
2 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Cable coupler M2 (10 uds)
2 x Brass ball links BS M3 V1 (10 pcs)
1 x 4 mm M3 red control terminal (4 pcs)
1 x Kwik link AL M4 con Clip (2 pcs)
2 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x Crimping sleeves for 1.1 mm cable (10 pcs)
2 x M4xM2,5xL30 nylon clevis and arm (10 uds)
2 x Kwik link AL M3 con Clip (2 pcs)
1 x Cable coupler M2 (10 uds)
3 x Ball link duraluminium M3 V1 (10 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
2 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x Couple M4 for wire (10 pcs)
1 x Threaded coupler M2 (10 uds)
2 x Green smoke canister 65 g
2 x Extractor piñones 2.3/3.2 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Yellow smoke canister 65 g
1 x White smoke canister 100 g
2 x Yellow smoke canister 100 g
1 x White smoke canister 140 g
1 x Remote electric ignition system
1 x Threaded coupler M3 (10 uds)
1 x Angled clevis with threaded rod M3
2 x White smoke bombs AX-60 (5 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Yellow smoke bombs AX-60 (5 pcs)
1 x "S" set for boats
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x Red smoke bombs AX-60 (5 pcs)
1 x Electric rocket starters (6 pcs)
1 x Yellow smoke canister 140 g
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x PCARD Wireless System
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Ball link Aluminio M3 (2 pcs)
2 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x AX-60 starters (5 pcs)
1 x Parachute expulsion foam
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Green smoke canister 100 g
1 x White smoke bombs AX-18 (5 pcs)
1 x Smoke set "S"
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Red smoke canister 140 g
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Smoke set "Glider"
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Ventral support for AX-18/AX-60
1 x White smoke canister 65 g
2 x Z type of cable coupler Ø 1 (2 uds)
2 x Ball Link ALU M3 - RH (1 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Extension MPX-MPX 20 cm
1 x Pulley brass 12/2 (2 pcs)
1 x Turbina KINGTECH K320 G5
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
2 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
2 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
2 x Starter EM Gear Power 80
1 x Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x Pin to cable coupler M1,6 ⌀ (6 pcs)
2 x Metal ball clevis M3 (10 uds)
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x Glases Flitemaster
1 x Glases Innovation Plus
1 x Glases Stratus
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Ventus 1:4 set of instruments
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Ball Link Plier
1 x Starter Sullivan-STAR 603 DINATRON
1 x Screwdriver for Hexagon 1,27mm
1 x Crimping tool
1 x Hot Glue Stick RED
1 x Hexagonal ball head 2.0 x 50 mm
1 x 2,0x50 mm allen screwdriver
1 x 
1 x Digital scale up to 40 kg
1 x Crimping tool
1 x Starter 12v (Max 90 and 15ccm)
1 x Cut tube
1 x Vacuum pump 12 CFM
1 x Vacuum pump P1-N
1 x Starter 12v (Max 180 and 30ccm)
1 x Z Bender - S Type Tool
1 x Dust collector for mould cleaning
1 x Ball Link Plier
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Starter EM Gear Power 250
1 x 1,5x50 mm allen screwdriver
1 x Starter Sullivan-STAR 601
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Copier 5x20 cm pcs
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Screwdriver for Hexagon 1,5mm
1 x XH male balance (4S) connector (2 pcs)
1 x ABS angle 2,0x2,0x1000 mm
1 x Steering arm 16 mm Ø 4 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Red smoke canister 65 g
1 x Turnbuckle M2,5x27/43 (2pcs)
1 x Wire easy tensioner (silver)
1 x Green smoke canister 140 g
2 x Blue smoke canister 100 g
1 x "M" set
1 x Support ECU Xicoy X-45
1 x Angle support XT60 conector
1 x Soporte filtro FESTO (4 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Soporte grifo FESTO (2 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Cable video GoPro
1 x Support FUEL DOT V3
1 x Support XT60 conector (2 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x 3l Smoke oil
1 x Propeller POWER-PROP 14x9
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
9,904.03EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies