109.00EUR

GRE-18 RTR Crawler 1:18 Orange
[KAV06GRE180O]


Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
2 x Aluminium rod Ø 4.0 mm x 3000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
2 x Brass rod Ø 1.5 mm x 1000 mm
3 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
3 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Tube Pitot to PIXHAWK
1 x PIX Hawk with accesories
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Futaba 30 mm servo arm with M3 ball link
1 x 46 mm Futaba servo arm tandem with ball link
1 x Para-RC Mix
1 x Parachute PV6 for F3J
1 x Gates hinge aluminium (1 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 6 mm ball link M3 (10 pcs)
1 x Servoarm Aluminium SH-82
1 x BALSA triangular 10x10x1000 mm
1 x Smoke set "M"
1 x Flat Connector 4.0 mm x 1000 mm
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Wheel collar 5 mm Ø (4 uds)
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Wheel collar 2 mm Ø (4 uds)
1 x Futaba Aero Large Case - Internal Foam
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Futaba BLS152 - Upper Case
1 x FUTABA 6L + R3106 2.4GHz
1 x Soporte grifo FESTO (2 pcs)
1 x SAVOX SH 0254 servo
2 x Savox Brushless Servo SC-1267 SG
2 x Actuador lineal HLS12-100210-7.4v
1 x Servo BLUE Bird BLS-H71B v2
1 x Carbon plate 350x150x1.0 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Receptor MINIMA 6S HITEC
2 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Glass fibre sleeve Ø 20 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Ferrita 14x8x5.5 mm
1 x Paramotor BackPack XXS 2
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Servo HITEC HS-225 MG
1 x Servo HITEC HS-635HB Carbonite
1 x Servo HITEC HS-85 BB
1 x Servo HITEC HS-81
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Servo HITEC HS-45 HB, servo box
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Fiberglass plate 350x150x0.5 mm
1 x Aluminium sheet 500x250x0,5mm
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Servo FUTABA BLS 272SV
1 x SE Ring 400 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Module 2.4GHz T-FHHS "F" Series
1 x Programador FUTABA USB CIU-3
1 x Futaba TM-24 "F" Series 2.4GHz T-FHSS Module
1 x SERVO S9177SV HV S-Bus2 Programable
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Tape GFK 25 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 350 mm (2 pcs)
1 x Tape GFK 38 mm
1 x Ring 320 mm length (5 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 
1 x 20x200 mm battery rings
1 x Foil for sticking flaps and ailerons
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x TWIST planeador gomas
1 x Servo BMS-4112
1 x 45 mm black plastic spinner for fixed propeller
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pick up DA50/100/150
1 x Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x 42 mm black plastic spinner for fixed propeller
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x Reed valve for DA 50-R
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Piston ring for DA-50R and DA-100
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Carburetor for ZG45SL and ZG62/S/SL
1 x Cylinder for ZG20
1 x Piston ring for DA-150
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spring clamp for tube Ø50 mm
1 x Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC
1 x Tufnol Choke Lever Arm d=4,7mm
1 x Covered closure or fairings
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Piston ring for DA-60 and DA-120
1 x Piston ring for ZG 20 and G240RC
6,332.00EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies