1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | Ventus 1:4 set of instruments |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | CM-3 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
3 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Adapter lead MPX/XT60 |
3 x | CC 03 |
2 x | Cabel charger transmitter GRAUPNER |
3 x | 30 cm BEC cable (male) |
1 x | CC 02 |
1 x | USB HLS prog. interface |
1 x | Dean "T" - Futaba Adapter |
1 x | 5 line servos wire black (1 m) |
1 x | Universal Colour Paste deep black 250 g |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | 30 cm DEANS female connector |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Baseplate servo |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Support pumb/filter Xicoy X45 |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Multi-adapter balancer JST - TP |
1 x | USB interface ALTIS |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Hardener Aero EPH 161 (250 g) |
2 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
2 x | Ball link M3 (6 uds) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Ferrita 14x8x5.5 mm |
2 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Set Altimeter SHRead |
1 x | PSC 5 |
1 x | PSC 6 |
2 x | TP/TopFuel - XH 2/3S Adapter |
3 x | Spare Shaft Ø4mm L:450x23mm M4 |
2 x | Kardan Black (without pinions) |
2 x | Ball link M2,5 (10 pcs) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
2 x | 270 mm 3/3 mm shaft ship |
3 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
2 x | U Profile ABS 5,0x10,0x1000 mm |
3 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | L-Connector 1.0 mm x 1000 mm |
2 x | Rigid coupling brass Ø 4 mm L: 25 mm |
2 x | Rudder 107-06 |
3 x | Rigid coupling brass Ø 5 mm L: 25 mm |
4 x | 290 mm M5 Prop shaft |
3 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
2 x | Flat Connector 4.0 mm x 1000 mm |
3 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
3 x | Cross Connector 4.0 mm x 1000 mm |
2 x | Spare Shaft Ø4mm L:450x18mm M4 |
2 x | L-Connector 1.5 mm x 1000 mm |
3 x | 290 mm M4 7/8x212 mm shaft ship |
2 x | Spare Shaft Ø6mm L:450mm M5 |
3 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
3 x | L-Connector 4.0 mm x 1000 mm |
2 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
2 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
2 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | |
1 x | Cotton Flocks, bag/ 500 g |
1 x | MEKP Harderner 100 g |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Gates hinge |
1 x | Bags wings/rudder ODYSSEY |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Battery Protection Circuit Board 22.2v 6s |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | Ball Link Plier |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | White gelcoat 1 Kg |
1 x | Female connector for 6 pines AWG |
1 x | MPX-Dean "T" Adapter |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Male connector for 6 pines AWG |
2 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
2 x | Ball link M2 (10 pcs) |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Cable Cargador FUTABA |
1 x | Bags wings/rudder ASPIRE |
1 x | Bags de Luxe ASPIRE |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Antenna holder bracket double |
1 x | Bags de Luxe ODYSSEY |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Extender tip (6 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Extension 2/3 lipos JST - JST/C |
2 x | Shaft for A60-20/22/24S (120 mm) |
2 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
2 x | Connector CAN 15 |
2 x | Screwdriver for Torx® TX8 |
1 x | JETImodel Addcap 820 |
2 x | 290 mm 290 mm M5x18 mm shaft ship |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Long ball link M2 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
2 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | Strip 2,5x1,25x330 mm |
1 x | Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Female connector for 12 pines AWG |
2 x | Battery charging cable XT60 |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Extension 5 lipos JST - JST/C |
1 x | Turbo light spinner cap white 32mm |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Propadapter for motor A50-V3 |
1 x | Shaft for A60-L V4 |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | ABS I Strip 20x10x1000 mm |
2 x | 290x4 mm M4 shaft ship |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Propeller RABOESCH M5 90 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | FesEx-Uni8 System |
1 x | Axle for motor A30-XL V2 |
1 x | A60 Motor Mount Alu complete set |
1 x | Shaft for A60-L (140mm) |
1 x | DUPLEX 2.4EX RC Switch |
1 x | FesEx-Uni6 System |
1 x | JETImodel Addcap 1640 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Backmountset complete A40 |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Cable adapter iCharger |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | A60-6XS V4 28-Pole |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Screwdriver for Torx® TX6 |
1 x | Axle for motor A20-S (3 uds) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Short ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Ball link M3 (10 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Left hydropropeller) |
1 x | Strip 2,0x2,0x330 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Left hydropropeller) |
1 x | Repair set for RAB0108-31 |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH.Ms 60R (5 Blades) (Right hydropropeller) |
|
11,454.26EUR |