599.88EUR

Esc KOSMIK 160 HV
[KON4816]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

COOL KOSMIK
If you love style and function, the Cool KOSMIK is made just for you. With an integrated fan combined with an active heat sink, you will find no better cooling solution available. You will immediately notice the stylish design of the integrated cooling plate, and will appreciate the active cooling fan in low airflow situations.

COOL KOSMIK, a design that is made for the most demanding situations.

KOSMIK 160 HV specifications
- 5-14 Lipo, 20-59 V
- 160 A continuous current
- BEC 7 A cont. current
- BEC 20 A peak current
- 108x53x28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
3 x	Foil for sticking flaps and ailerons
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Towing hook
3 x	SE Ring 250 mm (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	SE Ring 360 mm (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
3 x	SE Ring 240 mm (2 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
2 x	SE Ring 200 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	20x200 mm battery rings
3 x	Tape GFK 25 mm
2 x	Cinta Goldfix 1m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x	Carbon fibre sleeve 12k 170 mm x 5m
3 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
3 x	Marker ties (20 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	SE Ring 480 mm (2 pcs)
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x
2 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Towing hook
1 x	SERVO HOLDER
2 x	Fixed launching hook
1 x	Tape GFK 50 mm
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
3 x	Tape GFK 38 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x	SE Ring 330 mm (4 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
4 x	Towing hook <3m
2 x	SE Ring 450 mm (2 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
2 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x	ABS tube 2.0x1.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 3.0x1.0x1000 mm
2 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 3.0x2.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Xplorer3 anemometro
1 x	AX-60 starters (5 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Extension silicon 100 cm (Futaba)
1 x	Oracover ROYAL RED 2m
1 x	Oracover light Grey 2m
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Buy Perforated film 100 cm / 10 m
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Soporte filtro FESTO (4 pcs)
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Support pump Xicoy X45
3 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Styrene plate 320x120x1.0 mm
1 x	Support pumb/filter Xicoy X45
1 x	Adjustable launching hook
2 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
2 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
2 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Pulley brass 16/2 (2 pcs)
1 x	Kwik link with arm M3xM2xL24
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Pulley brass 12/2 (2 pcs)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Servo NARO Max Std
1 x	Micro clevis (10 uds)
1 x	Porta Kwik link M4 4 mm (2 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
3 x	SE Ring 350 mm (2 pcs)
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Pulley brass 10/2 (2 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Circlick securite
2 x	Suction funnel for carburetor 90D-L (red)
1 x	P 17×5.8 Prop-2PCS/PAIR
2 x	Bateria DJI Mini 2 2250 mAh
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Adapter FUN 400/480
1 x	KIRA 400-34
1 x	FELIX SportJet Blue/Green 2200 mm
1 x	Boeing (TX) T-7A Camo
1 x	VIPER SL NAVY PNP 2270 mm
1 x	JP Hobby ER-120 Tricycle FELIX JR
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Gearbox KPG27/28 4,7:1pinion
1 x	Gearbox KPG25- 5,2:1pinion
1 x	Adapter SPEED 480 whit axle short
1 x	JIVE 80+LV Esc
1 x	KIRA 500-36 6,7:1
1 x	KIRA 480-43 5,2:1
1 x	KIRA 500-30 6,7:1
1 x	JIVE 80+HV Esc
1 x	SE Ring 400 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Spikes Band (5 m)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Tank GFK Opus/JEt 300 ml
1 x	FELIX SportJet Yellow 2200 mm
1 x	MIRAGE 2000 Camuflage PNP
1 x	PC-21 2.880 mm RAAF Sheme
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x	MB339 Saudi PNP
1 x	VIPER SL YELLOW PNP 2270 mm
1 x	SCHOCKJET ARF 2.050 mm
1 x	PC-21 2.880 mm WHITE/RED
1 x	MIRAGE 2000 RED/BLACK PNP
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	JETImodel SINGLE BEC
1 x	Glass fibre sleeve Ø 20 mm
1 x	Neck strap JETI DC
1 x	DUPLEX 2.4 EX MVario2
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	DLE 55 carburetor
2 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Propeller electric carbon 10.5x6
1 x	Propeller POWER-PROP 10x6
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace)
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	Cable coupler M3 (10 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Teacher / Student Cable
1 x	Universal Colour Paste deep black 50 g
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x	DUPLEX 2.4EX Expander E2
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x	DJI Mavic Air Fly More Combo
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Rear cover O-ring 26/30 cc
1 x	Cylinder-piston Assembly 30cc
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Propeller electric carbon 9.5x5
1 x	Propeller electric carbon 7x7
1 x	Propeller electric carbon 6x5
1 x	TS832 to Gopro AV/Power Cable
1 x	100 mm rods + T patellas set for direction control
1 x	Silencer Ring 7-35
1 x	VIPER SL Gold PNP 2270 mm

40,331.27EUR