199.00EUR

FesEx-Uni8 System
[HK10107849]

A very easy to remove propeller adapter transforms your Scaleglider in seconds from the electric model to a pure glider and back. Slight pressure on the Propadapter lock pin allows you to pull off the prop/adapter unit. The model is still a pure glider with the option for self-launch. Adaptable to various engines and models.
Easy installation without sawing the nose and thus maintaining the original look and the resale value
The FesEx-Uni8 shaft adapter does not protrude through the fuselage tip - not visible from the outside when the propeller is removed
Aerodynamically negligible - small prop adapter, closely fitting propeller blades
Safety for pilot, helper and spectator
Can be attached and removed from the outside within seconds without tools
Withdrawn propellers can be safely stowed away (e. g. in the fuselage or in the trouser pocket)
In the locking device, a pull line can be clicked to the model to the starting point and retreat.
Made in Germany by Torcman

Specifications
maximal motor power: 3,5 kW
maximal RPM: 15000 rpm
Diameter snap-on sleeve in front: 12mm
Diameter ball bearing front: 32mm
for motor shaft with 8mm (Adapter for 5 and 6mm shaftdiameter available)
Propadapter wide: 31mm
Weight: 87g

Delivery contents
Set contains: Locking sleeve, ball locking bolt with prop adapter, frontframe incl. ballbearing, mounting sleeve

under request

Reviews

Quick Find

Shopping Cart

2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	DPS Switch JR/JR
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	CM-3
3 x	Circlick securite
3 x	CC 03
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
3 x	APM2.6 Power module with 5.3V DC BEC
1 x	Double conector with JR adapter and 200 mm extension
3 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Connector Sub-D 2+5 Male
2 x	CC 01
2 x	2 LiPo XH>EH adapter
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Cabling for Fox MDM1 wings
2 x	30 cm BEC cable (male)
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Connector CAN 15
3 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	3 LiPo XH>EH adapter
2 x	Cabel charger transmitter GRAUPNER
2 x	4 LiPo XH>EH adapter
2 x	CC 05
2 x	CC 02
2 x	30 cm BEC cable (female)
1 x	Dean "T" - Futaba Adapter
2 x	MAX BEC
1 x	SBEC Jeti
1 x	MAX BEC 2D plus EX
1 x	Multi-adapter balancer JST - TP
2 x	PSC 6
1 x	SPS Remote switch actuator
2 x	Male Prolonger TP 4/5S
2 x	Extension 2/3 lipos JST/C
2 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Extension 5 lipos JST/C - JST
2 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	SPS 70V 100/200 A
2 x	Extension 6 lipos XH > EH
2 x	Servo slow down unit (0,7-14,7 sec )
1 x	Interruptor SPS 70v 60/120A
2 x	Prolonguer for Balancer Thunder Power 6S
1 x	Extension 5 lipos JST - JST/C
1 x	Extension 5 lipos JST/C
1 x	SWTU2 switch
2 x	SBEC 40
2 x	Pins M connect Multipin connectors AWG 20-24
1 x	Magnetic Interruptor MULTIPLEX
2 x	MAX BEC 2
2 x	Switching module high voltage SXH
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
3 x	Interruptor RX/Batterie
1 x	USB interface ALTIS
1 x	Interface Realflight Simulator
1 x	Slave-cable USB Easy Sim
1 x	EasyFLY Addon
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Interface Jack Adapter IKARUS
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Xplorer1 anemometro
3 x	Extension 2/3 lipos JST - JST/C
1 x	Pilot "Anthony" (Slimline)
1 x	Switc electronic 30 Amp
1 x	Multi-adapter balancer JST/C - TP
1 x	SBEC 30 D
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Xplorer4 anemometro
1 x	Long Switch On/Off micro
1 x	Adapter lead MPX/EC3
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	MPX-Dean "T" Adapter
3 x	TP/TopFuel - XH 2/3S Adapter
1 x	5 LiPo XH>EH adapter
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Adapter lead MPX/XT60
2 x	TrainerCord (master-learner)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	BEC 3A FOXY
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	USB HLS prog. interface
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Glases Aspen
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Connector Sub-D 2+5 Female
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Support ECU Xicoy X-45
1 x	SPS 70V 140/280 A
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Three-position switched channel, short
1 x	Opto Gas Engine Kill Switch
1 x	Opto Gas Engine Kill Switch
4 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	GameCommander USB Universal
3 x	PowerBox SparkSwitch RS
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Hardener Aero EPH 161 (500 g)
1 x	resin-hardener L-385 H-385 (625 g)
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	PSC 5
1 x	Epoxy Resin L (2.5 Kg)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/6 Pilot "Buddy"
1 x	1/4 Pilot "Heidi"
1 x	1/6 Pilot "Tony"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	1/7 Pilot "Japanese"
1 x	1/10 Pilot "Jimmy"
1 x	1/12 Pilot "Tom"
1 x	1/12 Pilot "Langley"
1 x	1/12 Pilot "Fighter"
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	DPSI V-Match
1 x	Bec MR UBEC 5A (5v/6v/7v)
3 x	Carburador OS (Type 40K) 46AXII
1 x	Motor OS 81 FS 4T
3 x	Captador OS GT 33 cc
1 x	Axle for motor A50-L
2 x	JETImodel Addcap 820
1 x	Shaft for A60-20/22/24S (120 mm)
1 x	JETImodel Addcap 1640
1 x	Motor OS 46 AX II
2 x	Motor OS 3820-1200 electric
2 x	QUANTUM II 55 Brushless Motor
2 x	OS 37 SZ-H, Crankshaft
3 x	OS 40-FG 4T Motor
2 x	Bujia OS G5 gasolina
1 x	Motor OS MAX 160 AX
4 x	OS Engine 105HZ-R Heli with pipe 105
2 x	Motor OS FS-62V 4T
1 x	OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
3 x	Motor OS 15 LA
3 x	Motor OS 37 SZ-H
1 x	Motor OS MAX 120 AX
1 x	Motor OS MAX 65 AX (incl. muffler)
1 x	OS GT15 W/E-4040 for airplane
1 x	Turbo light spinner cap white 32mm
1 x	Propadapter for motor A50-V3
1 x	Propadapter for motor A50
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Screwdriver for Hexagon 1,5mm
1 x	A60 Motor Mount Alu complete set
1 x	Screwdriver for Torx® TX6
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
2 x	FesEx-Uni6 System
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
3 x	Axle for motor A20-S (3 uds)
1 x	Screwdriver for Torx® TX8
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
3 x	Cable adapter iCharger
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
2 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Axle for motor A30-XL V2
1 x	FesEx-Uni8 System
2 x	Suncover 100cc Red
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	L-39 Albatros 1:4.75, Electric retract landing gear
1 x	Electric Landing Gear GALEB G4
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	F4E Phantom Scale 1:7
2 x	Propeller hub spacer 8/5.5
2 x	Motor OS 50 SX-Hyper
1 x	Shaft for A60-XS-V2 (112,5mm)
1 x	F4U CORSAIR 93", Electric retract Landing gear
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Short Switch On/Off micro
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	POLARON EX 800w charger
1 x	eFuel 30A Power Supply
1 x	Motor A50-12 L V4
1 x	Motor A30-14 L V4
1 x	A60-6XS V4 28-Pole
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
2 x	Motor OS FS 95 V 4T
1 x	Shaft for A60-L (140mm)
1 x	EDF Stream-Fan 110mm kv780
1 x	Motor A30-10 XL V4
1 x	Motor B20-10 L + 4:1 gearbox
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	Motor A20-26 M EVO
1 x	Motor A50-16 S V4
2 x	A40 Backmountset complete
1 x	PT 22x10 EL Propeller
1 x	Esc master MEZON 120 Lite
1 x	A30-M/L/XL Backmountset complete
1 x	PT 16x10 E Propeller
1 x	Esc MasterBasic 70SB
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
2 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
2 x	A50 Motor Mount Alu complete set
1 x	DUPLEX 2.4EX RC Switch
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
2 x	Motor OS FS 75 AX
1 x	Motor OS 55 AX
1 x	OS Engine 105HZ-R Heli
1 x	A50 Backmountset complete
1 x	Motor OS FS 95 AX

31,052.67EUR