84.90EUR

Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
[HK93100351]


Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
Product description and features
The TopFuel LiFe-EC cells are built in a flat, LiPo-like design and therefore fit perfectly into almost any existing battery compartment.
The main difference to LiPo and LiIon batteries is the lower voltage of 3.3 volts to a maximum of 3.6 volts per cell. LiFe batteries are significantly less sensitive to under- and over voltage. They are characterized by a very constant and flat discharge curve and a very high cycle stability.
The battery is readymade soldered with the XT60 connector system.
Connections
XT60 connector with gold contacts, suitable up to 60 amps permanent current.
XH balancer connector
Internal chip for battery telemetry
Battery data such as type, number of cells, capacity, C-rate or battery ID are stored on the passive MTAG chip. If desired* these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and be transferred to the transmitter telemetry system.
The built-in MTAG chip also offers the possibility of manually or automatically counting and storing the charging cycles. By using several identical batteries in serial or parallel operation, so more effective active battery management is possible.
*Note: It is up to the user if he wants to use the MTAG function or not. The TopFuel battery can be used without MTAG function like any ordinary battery.

Specifications
Battery type LiFe
Ausführung 3S
Cells 3
Nominal voltage [V] 9,9
Capacity [mAh] 3100
C rate 30C
Balancer connector XH
Dimensions and Weight
Length [mm] 136
Width [mm] 42
Height [mm] 23
Weight [g] 260


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fiber rod 5.0 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Jeti Black cap
2 x Foil for sticking flaps and ailerons
2 x SE Ring 480 mm (2 pcs)
2 x Cinta Goldfix 1m
1 x Tape GFK 50 mm
1 x SE Ring 200 mm (2 pcs)
3 x SE Ring 240 mm (2 pcs)
2 x SE Ring 360 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Spikes Band (5 m)
1 x Tape GFK 25 mm
1 x Bungee HLG Premium
3 x Vasa model Catapult
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x L-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x Profile ABS half cane 2.0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
2 x Profile ABS Square 2 x 1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Profile ABS half cane 3x1000 mm
2 x ABS "T" angle 10.0x10.0x1000 mm
2 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
2 x U Profile ABS 8,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Aluminium wide washer M4 Red (4 pcs)
1 x M3 black washers (4 pcs)
2 x Servo NARO Max Std
1 x 1/6 Pilot "Garry"
1 x Vest clothes Hispano Aviación
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Blades 330mm
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x Carbon fiber rod 20 mmx1000 mm
2 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
2 x Carbon fiber rod 6.0 mmx1000 mm
2 x NF-3m Heli Kit
1 x NF-2 RC set
2 x NF-3 RC set
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x LightBox SR
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x X-RAY Micro QR (Tail Tube)
1 x Release wax 250ml
1 x 20 g tin paste
1 x Nitroverdu 500 ml
1 x Ring support P-20 OPUS V-Jet 60mm
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x SE Ring 300 mm (2 pcs)
1 x Canopy Astra
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x DINO Glider ARC
1 x Electric spoiler 440 mm (2 pcs)
1 x TAKEO 3.6m electric
1 x 20x200 mm battery rings
1 x VAGABOND 1500 mm ARF V2 (Red)
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS half cane 7.0x1000 mm
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x LO 100 ARC 3.3m,cabina
1 x Profile ABS Square 4 x 1000 mm
1 x A50 Motor Mount Alu complete set
1 x Screwdriver for Hexagon 1,5mm
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x LA500 Autogyro
1 x Actuador lineal HLS12-100210-7.4v
1 x Side rudder
1 x A60 Motor Mount Alu complete set
1 x Backmountset complete A40
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Angled clevis with threaded rod M3
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Couple M4 for wire (10 pcs)
1 x DYMOND VTX UBS Programming adapter
1 x Bearing 3x6x2,5
1 x Head core bushing
1 x Steering lever
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Head upper part
1 x Squared carbon wing joinner 5x5x220 mm
1 x Tank GFK Opus/JEt 300 ml
1 x Head lower part New
1 x Balls 4 mm
1 x 
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x CA Glue fast 20g
1 x Buy Perforated film 100 cm / 50 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Buy Perforated film 100 cm / 10 m
1 x CA Glue (medium) 20g
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Program 5v SIO RS 232
1 x 9x4.7 * 22x12 carbon propeller
1 x X-RAY Micro QR (Elevator)
1 x Jet Afterburner Simulator NF-Jet2
1 x Jet Afterburner Simulator NF-Jet4 RY
1 x Jet Afterburner Simulator NF-Jet3 YSW
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x FOX ARF 2000 mm Red (Hacker Model)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Avia spare blue cockpit (Top Model)
1 x Bidule 111 3000 mm Canopy
1 x ALBATROS 3.0 m (orange/white)
1 x Albatros ,spare fuselage (Top Model)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x BULLIT Wing 840 mm
1 x CC 11 Conector
1 x Conector JR Servo female (10 pcs)
1 x CC 01
1 x Pilot "Goose" (Slimline)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Servo Controller Fibra optica
1 x Landing gear retract neumatic (Jet Legend)
1 x EasyFLY Addon
1 x PPS-4D Propeller
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x SERVO DES 588 BB MG
1 x Glider KNIRPS
1 x X-RAY Micro QR
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Profile ABS half cane 4x2.5x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
2 x Propeller 11x4,7 SlowFlyer
14,544.26EUR
Manufacturers
Manufacturer Info
Hacker
Hacker Homepage
Other products
Languages
Español English
Currencies