4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Extension MPX-MPX 20 cm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock
Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	XT-60 connector (male) temporarily out of stock

Quick Find

Shopping Cart

3 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Cable S.BUS 3 salidas 300 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Extension 100 cm (Futaba)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
3 x	Premium servo extension 50cm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
3 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Futaba male 40 cm extension
2 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	Extension silicon 30 cm male (Futaba)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Extension 90 cm (Futaba)
2 x	200 mm extensión servo HITEC/JR
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
4 x	Extension silicon 35 cm male (Futaba)
2 x	Cabel "Y" 30 cm (graupner)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
2 x	Carbon fiber flat 1000x6.0x0.8 mm
3 x	Extension lead 15 cm Multiplex
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Cabel "Y" 15 cm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Hot Glue Stick GREEN
1 x	3,0x60 mm allen screwdriver
2 x	Starter 12v (Max 90 and 15ccm)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Hot Glue Stick RED
2 x	Starter Sullivan-STAR 601
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Vacuum pump P1-N
2 x	Starter EM Gear Power 80
1 x	Ball Link Plier
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Starter EM Gear Power 250
1 x	Crimping tool
1 x	Z Bender - S Type Tool
3 x
1 x	1/12 Pilot "Cougar"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Piloto Jet "Red" 1/6 Scale
1 x	1/6 Pilot "Garry"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Vasa model Catapult
1 x	Bungee HLG Premium
1 x	Marker ties (20 pcs)
1 x	Conector BEC male (10 pcs)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Support pump Xicoy X45
3 x	Circlick securite
2 x	Extension silicon 25 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
2 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
3 x	Extension silicon 35 cm (Futaba)
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Dremel 3000 130W
1 x	Propeller POWER-PROP 7x7
1 x	Heli blades angle measurer
1 x	Mini Lock Grips 2PCS
2 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Tube bender
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Hot Glue Stick BLACK
1 x	2,5x60 mm allen screwdriver
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
2 x	CNC FPV Display screen&Transmitter Holder Vertical
2 x	Carbon fiber rod 3.0 mm x 1000 mm
3 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension 7.5 cm
2 x	Extension silicon 10 cm (Graupner)
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Bearing housing
1 x	Washer 2.2×4
1 x	Head spacer
1 x	Aqua RACE 70 (without motor)
1 x	460 mm EPP Floats
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Red aluminium servo arm V2-Futaba 1,5" inch M3
1 x	120x60 mm SLH KOVO wheel
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Buy Perforated film 100 cm / 10 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x
1 x	Steel Screw M1x8 (10 pcs)
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	CA Glue fast 20g
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Red aluminium servo arm V3-Futaba 3-3,5inch
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Extension 15 cm (Futaba)
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Premium servo extension 25cm
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Wheel keeper washer
1 x	Extension silicon 50 cm (Futaba)
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	Extension silicon 75 cm (Futaba)
1 x	Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
1 x	Servo Mount S (red)
1 x	Futaba Female 40 cm extension
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Red aluminium servo arm V2-Futaba 2,0 inch
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Premium servo extension 75cm
1 x	Extension silicon 30 cm male (Graupner)
2 x	Premium servo extension 100cm
1 x	Red aluminium servo arm V3-Futaba 1,5inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	PT 20x13 EL Propeller
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Fuel bottle 500 ccm
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Engine mounts for .09 - .19 engine
1 x	Glow filter
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	PropCover 16-20" (2 pcs)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
2 x	Glow Plug Clip 1.3 Ah
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Telemetry interface ALTIS 12 cm
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	1/10 Pilot "Jack"
1 x	L-shaped servo mount
1 x	Ball joint long
1 x	Blade holder lower
1 x	Screws flush mount M2
1 x	Blade holder upper
1 x	Motor wall
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	Glow/Gas/Smoke/Kerosene filter
1 x	Glow starter with charger 230v
1 x	Tachometer Hyperion Multi-pala
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	ESC Ripmax QUANTUM 80A SBEC
1 x	Program Card KAVAN ES
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	Compact on-board starting system (9724)
1 x	Raer wall
1 x	Side rudder
1 x	Blade holder center GFK 0,5 mm
1 x	Balls 4 mm
1 x	Tail support (2 pcs)
1 x	Battery plate
1 x	Blade holder center
1 x	Screws M1,6x6 Allen
1 x	Nut M1,6
1 x	Head core bushing
1 x	Side Plate
1 x	Nut M2 securing
1 x	Head upper part
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Optotronix X-Carrier
1 x	DPSI Ampere & Voltage bundle
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	Release film 100 cm x 50 m
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m

14,344.38EUR