534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x	Surprise XII Rudder (Freudenthaler)
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller POWER-PROP 13x9
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	X-RAY Micro QR (Tail Tube)
1 x	Aramid 50 daN 50 m
1 x	Bidule 55 2460 mm Cabina
2 x	90x75 mm standart servo cover
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Angle of incidence meter
1 x	Chili Race F3K (aramid nose)
1 x	Ball link M3 (6 uds)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	AddCAP 10AS capacitors
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	MYLAR film A350 (1000x500 mm)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Oracover Red 2 m
1 x	Tow hook for tug
1 x	DUPLEX 2.4EX MULi 6s M
1 x	Oracover GREY Seafire Sea 2m
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Oratex White 2m
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	4 LiPo XH>EH adapter
1 x	Straightened threaded rod M3 - 1m
1 x	Socket head long ball link M3 (6 uds)
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover Black 2 m
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	JETImodel SINGLE BEC
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Short ball link M3 (6 uds)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	5 LiPo XH>EH adapter
1 x	Oracover Yellow CUB 10 m
1 x	Oracover Yellow CADMIO 2 m
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Cabel charger transmitter GRAUPNER
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	ABS tube 5.0x3.0x1000 mm
1 x	DUPLEX 2.4EX Expander E2
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	SERVO HOLDER
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	TrainerCord (master-learner)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Pine wood slat 10x10x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	BALSA triangular 15x15x1000 mm
1 x	Antenna holder bracket double
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Beech dowels 4.0 x 1000 mm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	ABS tube 16.0x14.0x1000 mm
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	ORACOVER transparent Yellow (10 m)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Short ball link M1.6 (6 uds)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
2 x	DUPLEX 2.4EX Expander E4
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
3 x	X-RAY Micro QR (Fuselage with canopy)
1 x	SAGITA Alsema 4.0 m
2 x	Ventus 2cx 4.5 m de Luxe
1 x	SHK 4000 mm Scale 1:4.25, V-Tails
1 x	Ventus 2cx 4.5 m Winglets
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Mobile Terminal
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
2 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	F450/550 Quadcopter, landing gear
3 x	Swift S1 De-luxe 3.730 mm
1 x	Albatros ,spare cockpit (Top Model)
1 x	Stickers-digit for marking
2 x	57 mm micro-mini servo cover
1 x	NoNa BB wheel Ø125x35mm in pair
2 x	65 mm mini servo cover
1 x	NoNa BB wheel Ø175x55mm in pair
1 x	Servo TOPMODEL STANDARD S3217
1 x	Servo TOPMODEL DS9010 T
1 x	7 mm gas motor standoff
1 x	COMFORT MOUNT ø 55 mm
2 x	THERMIK DREAM 3.000 mm (Topmodel)
1 x	Ventus 2cx 4.5 m
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
2 x	50x45 mm micro-mini servo cover
1 x	L ELBOW 90º ø 25 mm
1 x	11 mm wing servo holder
1 x	MPX Support
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	Clip mini fixing for wing (2 pcs)
1 x	Canopy Sweet / Siesta
1 x	Towing hook
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	34 mm Alu spinner 4 mm pleg. propeller
1 x	Towing hook <3m
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Astra wing Joinner (Top Model)
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Electric coversion set
1 x	Spare screw M3 6pcs.
1 x	Adjustable launching hook
2 x	58 mm micro servo cover
1 x	Avia spare blue cockpit (Top Model)
1 x	Horn for flap control (1 pcs)
1 x	Elevator VENTUS 2cx 4.5m
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
2 x	Siesta T tail (Topmodel)
2 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Swift S1 De-luxe 3.140 mm
1 x	NoNa BB wheel Ø105x35mm in pair
1 x	ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A
1 x	NoNa BB wheel Ø150x45mm in pair
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
2 x	COMFORT MOUNT ø 25 mm
1 x	Regulador XC4018BA V2 (40Amp)
2 x	SWEET Electro ARF "CFR fuselage " (Top Model)
1 x	Servo TOPMODEL S7520 MG
1 x	Servo TOPMODEL DS1413 T
1 x	NoNa BB wheel Ø200x60mm in pair
1 x	Set of buckles and strap, 1:4 scale.
1 x	Swift S1 De-luxe JEPPESEN 3.140 mm
1 x	Ventus 2cx 4.5 m Canopy
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	Ventus 2cx 4.5 m Cabling wings
1 x	COMFORT MOUNT ø 60mm
1 x	Mini DART 2 F3K carbon light 1m Green
1 x	switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Servo Metal Horn 15.5 mm MKS
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Servoarm SH-81, two sides, aluminium
1 x	BlueCom™ Adapter (iOS)
1 x	Charging Extension 50cm for 2 Battery
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	Conector JR Servo female (50 pcs)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Servo SAVOX SV-0236 MG HV
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	FIALA Propeller 26x10
1 x	CYCLONE XT 6.2m ARF
1 x	Allen wheel collar M4x6
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
2 x	Fixed launching hook
1 x	Pan Head Screw M1,6x6 (10 pcs)
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	DUPLEX 2.4EX MUI 75
1 x	Towing hook
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	DUPLEX 2,4GHz MRPM EX
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Nylon Screw M5x30
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Tension Springs (4pcs.) for DC/DS Tx DUPLEX 2,4EX
1 x	Pan Head Screw M2x6 PH
1 x	PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	40 mm servo arm with bearing (2 pcs)
1 x	SIG Coverall 1.2x4.5 m
1 x	Quicklock washer 1 mm (10 pcs)
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	SWTU2 switch
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	VARIO module Hott
1 x	Pitot tube JETI MSpeed DUPLEX
1 x	switch long 3-position DC Tx DUPLEX 2,4EX

18,998.39EUR