534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Kwik link with arm M3xM2xL24
1 x	Cable coupler M2,5 (2 pcs)
2 x	Cable coupler M3 (10 uds)
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Black large kwik link (10 pcs)
2 x	Kwik link with arm M5xM2,5xL30
3 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
2 x	Aluminium red ball links M3 V1 (10 pcs)
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Cable coupler M2 (10 uds)
2 x	Brass ball links BS M3 V1 (10 pcs)
2 x	4 mm M3 red control terminal (4 pcs)
1 x	Kwik link AL M4 con Clip (2 pcs)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
2 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Cable coupler M2 (10 uds)
3 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
3 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler M2 (10 uds)
3 x	Green smoke canister 65 g
2 x	Extractor piñones 2.3/3.2 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
3 x	Yellow smoke canister 65 g
1 x	White smoke canister 100 g
3 x	Yellow smoke canister 100 g
1 x	White smoke canister 140 g
2 x	Remote electric ignition system
1 x	Threaded coupler M3 (10 uds)
1 x	Angled clevis with threaded rod M3
3 x	White smoke bombs AX-60 (5 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
3 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	"S" set for boats
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	Electric rocket starters (6 pcs)
2 x	Yellow smoke canister 140 g
1 x	Z type of cable coupler Ø 1.8 (2 uds)
2 x	PCARD Wireless System
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
2 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x	AX-60 starters (5 pcs)
2 x	Parachute expulsion foam
2 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Green smoke canister 100 g
2 x	White smoke bombs AX-18 (5 pcs)
1 x	Smoke set "S"
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x	Red smoke canister 140 g
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Smoke set "Glider"
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Ventral support for AX-18/AX-60
1 x	White smoke canister 65 g
2 x	Z type of cable coupler Ø 1 (2 uds)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	B4-0 rocket charges (6 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
2 x	Extension MPX-MPX 20 cm
1 x	Pulley brass 12/2 (2 pcs)
1 x	Turbina KINGTECH K320 G5
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
2 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
2 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
2 x	Starter EM Gear Power 80
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
2 x	Metal ball clevis M3 (10 uds)
1 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Glases Flitemaster
1 x	Glases Innovation Plus
1 x	Glases Stratus
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Ventus 1:4 set of instruments
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Ball Link Plier
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Screwdriver for Hexagon 1,27mm
1 x	Crimping tool
1 x	Hot Glue Stick RED
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	2,0x50 mm allen screwdriver
1 x
1 x	Digital scale up to 40 kg
1 x	Crimping tool
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Cut tube
1 x	Vacuum pump 12 CFM
2 x	Vacuum pump P1-N
2 x	Starter 12v (Max 180 and 30ccm)
1 x	Z Bender - S Type Tool
1 x	Dust collector for mould cleaning
1 x	Ball Link Plier
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Starter EM Gear Power 250
1 x	1,5x50 mm allen screwdriver
2 x	Starter Sullivan-STAR 601
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Copier 5x20 cm pcs
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Screwdriver for Hexagon 1,5mm
1 x	XH male balance (4S) connector (2 pcs)
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Steering arm 16 mm Ø 4 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Red smoke canister 65 g
2 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Wire easy tensioner (silver)
1 x	Green smoke canister 140 g
2 x	Blue smoke canister 100 g
1 x	"M" set
2 x	Support ECU Xicoy X-45
1 x	Angle support XT60 conector
1 x	Soporte filtro FESTO (4 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Soporte grifo FESTO (2 pcs)
2 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Cable video GoPro
2 x	Support FUEL DOT V3
2 x	Support XT60 conector (2 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	3l Smoke oil
2 x	Propeller POWER-PROP 14x9
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Emisora JETI Duplex DS-16 II SILVER Multimode
1 x	Hand Pads for Tray JETI
1 x	Transmitter JETI Duplex DS-12 SE Carbon RED
1 x	46 mm Futaba servo arm tandem with ball link
1 x	DUPLEX 2.4 EX MBar
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	Futaba 30 mm servo rounded arm
2 x	Switch Cap L (Blue)
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x	DUPLEX 2.4EX Expander E2
1 x	Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode
1 x	Futaba 38 mm servo arm with ball link
1 x	DSM 10 Dual Switch Mixer
1 x	Car Charger DC/DS-16
1 x	Adap/Exten for Futaba 12-14C
1 x	Transmitter JETI Duplex DS-12 EX Special Edition
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Cable control set
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Horn with ball 55x40
1 x	6 mm red aluminium threaded horn with patella
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	Spinner NUT 1/4x28
1 x	Spinner NUT M5
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Transmitter JETI Duplex DS-24 EX Carbon Line Multimode
1 x	TX-Tray V1 (L) (Black)
1 x	Transmitter JETI Duplex DS-12 EX Multimod BLACK
1 x	Futaba Neckstrap
1 x	SWTU2 switch
1 x	Neck strap JETI DC
1 x	Transmitter Balancer Futaba T-10CG
1 x	FUTABA 20 mm servo arm with ball link
1 x	JETI transmitter DC-14 II Blue Multimode
1 x	Switch Cap M (red)
1 x	Receiver FrSKY Archer R8pro 2,4 Ghz
1 x	Hitec 20 mm servo arm
1 x	Adapter rotula M3
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	6 mm ball link M3 (10 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Battery FUTABA 18MZ
1 x	DUPLEX 2.4EX MUI 75
1 x	Futaba Aero Large Case - Internal Foam
2 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	Switch Cap L (Red)
1 x	Transmitter JETI Duplex DS-24 EX Multimode
1 x	Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Futaba 25 mm servo arm with M3 ball link
2 x	DUPLEX 2.4EX Central Box 210
1 x	Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo
2 x	JETImodel SINGLE BEC
1 x	Heat Seal Iron
1 x	Propeller diller for EME35 and DLE35
1 x	Tachometer Hyperion Multi-pala
1 x	EC-Cutter
1 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Sealing Iron Sleeve STD
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x	ER-40eVo Set B [Complet Set + GS200]
1 x	Red smoke canister 100 g
1 x	Brake disc Electron Retracts
1 x	10-15mm Servo Arm
1 x	Parachutist
1 x	RB-45 Electronic
1 x	ER-50eVo Set A [2x ER50 + RB-45]
1 x	GS-200 Electronic
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x	PIX Hawk with accesories
1 x	QUANTUM II 55 Brushless Motor
1 x	Servo NARO Max Std
1 x	FesEx-Uni8 System
1 x
1 x	FesEx-Uni6 System
1 x	Hovercraft sailcloth
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	EasyFLY Addon
1 x	Motor OS 3820-1200 electric
1 x	RS-200 Touch Programmer
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Manual Controller
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Smoke set "M"
1 x	White smoke bombs AX-3 (10 pcs)
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	Blue smoke canister 140 g
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x	10-15mm Servo Arm HITEC
1 x	PPM Encoder Module
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	SkyMaxx 1.550 mm (kit)
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Turnbuckle M2x22/35 (2pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Hitec 38 mm servo arm with ball link
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Quick hose connector 4-3 mm
1 x	Quick hose connector 4-4 mm
1 x	FESTO connector M7 Quick 4 mm
1 x	T-Hose connector 4-4-4mm
1 x	Quick hose connector 6-6 mm
1 x	Quick hose connector 3-3 mm
1 x	T-Hose connector 2-2-2 mm
1 x	Racor 2/3 mm
1 x	JETI handheld transmitter DS-14 II Blue Multimode
1 x	Small adjustable control horn with bearing
1 x	Teacher-student connector T12FG/FX-30
1 x	JETI handheld transmitter DS-14 II Green Multimode
1 x	Horn 6/27 with M3 Bearing
1 x	Transmitter Balancer Futaba V
1 x	DUPLEX 2.4GHz GPS
1 x	Horn 6/20 with M3 Bearing
1 x	Shaft sleeve LAMA
1 x	FIALA Propeller 24x10
1 x	FIALA Propeller 18x8
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Pitot tube JETI MSpeed DUPLEX
1 x	Jeti SPIN 66 Pro
1 x	Horn 6/35 with M3 Bearing
1 x	Horizontal mounting servo holder
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Horn 5/10 with M2 Bearing
1 x	Receiver FUTABA R7014SB FASST Test

41,338.38EUR