1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Tape GFK 25 mm |
1 x | Long ball link M1.6 (6 uds) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Pin hinge 39x20 mm (10 uds) |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
3 x | White smoke bombs AX-18 (5 pcs) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | PROFI Box JETI |
2 x | ABS Strip 1.5x4.0x1000 mm |
2 x | CC 02 |
2 x | 3 LiPo XH>EH adapter |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Softshell Hispano Aviación |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Oracover Black 2 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
4 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Straightened threaded rod M3 - 1m |
3 x | Long pinned hinge (6 uds) |
1 x | Paramotor BackPack XXS (without accessories) |
3 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Horn with ball 40x30 |
1 x | Esc X-75-OPTO-Pro |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
3 x | 25 mm reinforced hinge |
1 x | DLE 85 Ignition unit |
4 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
4 x | 37 mm PVC transparent battery termo-retract (1 m) |
3 x | Parachutist |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
3 x | Windsock Ozone L -1200 mm |
2 x | Buy Perforated film 145 cm / 50 m |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Connectors DEANS 4 pins (1 pair) |
4 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Esc X-55-SB-Pro |
1 x | 1/6 Pilot "Tony" |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Futaba male 40 cm extension |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | CC 01 |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | ABS Strip 1.5x2.0x1000 mm |
3 x | 1/10 Pilot "Jack" |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Circlick securite |
2 x | B4-0 rocket charges (6 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | 1000 cc gasoline fuel tank complet |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | SE Ring 480 mm (2 pcs) |
2 x | Red smoke canister 100 g |
1 x | Ball Link Plier |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | 18m Fitting barb |
4 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 100 mm rods set for direction control |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Esc X-70-OPTO-Pro |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | 1000 ml sealer (DOPE) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Bird (Aero-naut) |
3 x | 5 mm M2 variable inclined horn |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | M3 Maxi ball link (2 uds) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
3 x | 1/6 Pilot "Garry" |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Round Rod 2,0x1000 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | SE Ring 250 mm (2 pcs) |
1 x | ESC YGE 120 LVK |
1 x | 5 line servos wire black (1 m) |
1 x | Solvent Plasti Dip 1000 ml |
1 x | 90 mm rods + T patellas set for direction control |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
6 x | 6,4x1000 mm 2:1 green termoretract tube |
4 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | 1/7 Pilot "Japanese" |
2 x | 1/4 Pilot "Heidi" |
1 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Piloto Jet "Red" 1/6 Scale |
1 x | Connectors banna oro 3 mm (M/F) |
2 x | 20 g tin paste |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Wing OXY 5,0 m2 |
2 x | Spikes Band (5 m) |
2 x | 1/12 Pilot "Langley" |
2 x | Piloto jet 130 mm |
3 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Tape GFK 50 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
3 x | Esc KOSMIK 200 HV |
1 x | Cable set PREMIUM, fuselage/wing |
3 x | LUCAS pilot ARTF |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Spray Graphit 33 |
1 x | Motor DLE 430 cc - Paramotors |
4 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | ESC YGE 90 HV F3A |
1 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Spannlack 1000 ml |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | Profile ABS half cane 7.0x1000 mm |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Horn 6/20 with M3 Bearing |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
2 x | Hot Glue Stick BLACK |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | 140 mm rods set for direction control |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Ball link M1.6 (6 uds) |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | One Way bearing for EME55 starkit with key |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Esc MasterSPIN 75 Pro OPTO |
1 x | Threaded coupler M3 (10 uds) |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Esc X-70-SB-Pro 2-6S |
1 x | Extension silicon 10 cm (Graupner) |
2 x | TrainerCord (master-learner) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | Conector BEC male (10 pcs) |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Starter Sullivan-STAR 603 DINATRON |
3 x | Pin hinge 26x11 mm (10 uds) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
4 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Esc MasterSPIN 16 Pro |
1 x | Motor A2212/13T |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Round Rod 3,0x1000 mm |
1 x | BEC 3A FOXY |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Motor DLE 170 M- Paramotors |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | JIVE 80+HV Esc |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Interface Jack Adapter IKARUS |
4 x | Oracover Azul Cielo 2 m |
1 x | EasyFLY Addon |
3 x | Para-RC Trike "RC-Bullix" |
3 x | "S" set for boats |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | 4,8x1000 mm 2:1 black termoretract tube |
4 x | Connector CAN 15 |
1 x | Paint gun for sprays |
1 x | Optical RPM Sensor |
1 x | "Taxi Tank" Fuel Tank |
2 x | SE Ring 450 mm (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | USB Mini Camera endoscope |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Towing hook |
2 x | USB HLS prog. interface |
3 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | METEOR 1.000 mm kit |
1 x | Profile ABS half cane 6.0x1000 mm |
2 x | Ring 320 mm length (5 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | 160 mm carbon undercarriage (2pcs) |
4 x | 2 LiPo XH>EH adapter |
2 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Glases Innovation Plus |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Regulador Hobbywing Platinum PRO 130A-HV V4 |
2 x | Marker ties (20 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Vasa model Catapult |
3 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | PIT (Aero-Naut) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Esc MasterBasic 55SB |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Extension silicon 10 cm (Futaba) |
2 x | SE Ring 360 mm (2 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Cap Hispano Aviación |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Angle measurer |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
3 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Round Rod 2,5x1000 mm |
1 x | Flat washer 2.2 mm (20 pcs) |
3 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Oracover Brown 2 m |
2 x | 1/12 Pilot "Tom" |
1 x | Copier 2x20 cm pcs |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Regulador Jeti Jes 045 |
1 x | Ferrita 27x14x7 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | 45 mm rods set for direction control |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
4 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Parachute PV6 for F3J |
1 x | 20x200 mm battery rings |
3 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
3 x | Wing OXY 0,5 pulgadas2 |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
4 x | Esc KOSMIK 210 HV-I COOL |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | "S" set for planes |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
3 x | Round Rod 1,25x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
4 x | Esc KOSMIK 160+ HV COOL |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
2 x | 30 cm BEC cable (female) |
3 x | 20 mm carbon horn |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Xplorer2 anemometro |
2 x | Smoke set "Glider" |
3 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Canopy Latch |
4 x | 6 mm red aluminium threaded horn with patella |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | 110x55 mm C SLH KOVO wheel |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 55% silver electrodes (2 pcs) |
2 x | PCARD Wireless System |
3 x | 1/6 Pilot "Buddy" |
1 x | 22m Fitting barb |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Esc X-30-Pro BEC |
1 x | Round Rod 4,0x1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | Conector JR Servo female (10 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Ventral support for AX-18/AX-60 |
1 x | Kontronik ProgUnit |
1 x | Conector FUTABA Servo female (10 pcs) |
2 x | Blue smoke canister 140 g |
2 x | Trike XL motor set (motor+esc+prop) |
4 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | Gates hinge |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Partall paste 650 g |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Dust collector for mould cleaning |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | ABS I Strip 10x5x1000 mm |
1 x | Cinta Goldfix 1m |
2 x | 1,6x1000 mm 2:1 red termoretract tube |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Ball link Aluminio M3 (2 pcs) |
1 x | Tape GFK 38 mm |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | 102 mm aluminium spinner |
2 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Spray EC Red 400ml |
3 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | BALSA trip 4.0x4.0x1000 mm |
5 x | 30 cm BEC cable (male) |
3 x | Micro flex hinge (12 uds) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Connectors DEANS (T) |
1 x | White smoke bombs AX-9 (10 pcs) |
2 x | Glases Nimbus |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | Blue smoke canister 100 g |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Glases Flitemaster |
1 x | JETImodel SINGLE BEC |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 80 mm rods set for direction control |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Jeti Black cap |
2 x | Protective open Cover for wires Ø 13 mm 1000 mm |
3 x | Vest clothes Hispano Aviación |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Glases Stratus |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | One Way bearing for EME35 starkit with key |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | 1/4 Pilot "Mike" |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Remote electric ignition system |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | KOLIBRI 140 LV Esc |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Esc KOSMIK 200+ HV |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Horn with ball 55x40 |
1 x | Hovercraft sailcloth |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Esc MasterSPIN 80 Pro |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
4 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Round Rod 5,0x1000 mm |
2 x | Green smoke canister 140 g |
1 x | Digital scale up to 40 kg |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | TMM 2512-3S heli |
2 x | |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | CC 03 |
1 x | ORACOVER Fluor red (2 m) |
2 x | Cap closure 33/23.5mm (2 uds) |
3 x | PC-21 XXL 3.395 mm |
1 x | Universal Colour Paste deep black 250 g |
2 x | Smoke set "S" |
1 x | Towing hook |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | PIX Hawk with accesories |
2 x | KOBY 40 LV Esc |
2 x | Round Rod 6,0x1000 mm |
1 x | Starter EM Gear Power 250 |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | White smoke canister 140 g |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
5 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Round Rod 1,0x1000 mm |
1 x | Connectors MPX black female |
1 x | Extension silicon 50 cm (Graupner) |
4 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Parachute expulsion foam |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Esc MasterSPIN 66 Pro |
1 x | Big Crow DLE-170M |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Joint with bearing M3 22x5,5 |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | White smoke canister 100 g |
1 x | Esc MasterSPIN 70 Pro OPTO |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | M3 Maxi ball link (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | 2,5x60 mm allen screwdriver |
1 x | UBEC 6A KAVAN |
2 x | Starter 12v (Max 90 and 15ccm) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Starter Sullivan-STAR 601 |
3 x | 22 mm Cut Disc Proxxon/Dremmel |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Ferrita 14x8x5.5 mm |
3 x | MAX pilot ARTF |
1 x | Z Bender - S Type Tool |
1 x | ESC PULSAR A-40 |
1 x | Connectors banna oro 2 mm (M/F) |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Cable control set |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | Cable Cargador FUTABA |
1 x | 5 LiPo XH>EH adapter |
2 x | 6 mm aluminium horn with patella |
1 x | Ball Link Plier |
1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
2 x | Green silicone 0,25 qmm wire (50 m) |
2 x | 15 mm reinforced hinge |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Glases Nimbus "Black" |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Short ball link M3 (6 uds) |
2 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | 1/6 Pilot "Cindy" |
1 x | CC 05 |
2 x | 1/12 Pilot "Fighter" |
1 x | Carburetor DLE 20 |
1 x | Allen wheel collar M4x4 |
3 x | Control horn long w/ball |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Circlick securite |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Conector JR Servo male (10 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Green smoke canister 65 g |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Exhaust pipe BX 155 Left |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Hot Glue Stick RED |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Hobbylite Filler, Balsa colour |
1 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
3 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Xplorer4 anemometro |
3 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | 800TVL CMOS camera for FPV |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Hot Glue Stick GREEN |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | TMM 1210-3S heli |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Pilot "Anthony" (Slimline) |
3 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | DYNAMOMETER S-1580 |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | 2,0x50 mm allen screwdriver |
1 x | Dean "T" - Futaba Adapter |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Ferrita con funda |
1 x | Red smoke canister 140 g |
2 x | 1,5x50 mm allen screwdriver |
1 x | Threaded coupler M2 (10 uds) |
4 x | 4 LiPo XH>EH adapter |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Profile ABS half cane 5.0x1000 mm |
3 x | Strip 3,5x1,75x330 mm |
4 x | Carbon fiber flat 1000x3.0x0.5 mm |
3 x | 1,2x1000 mm 2:1 black termoretract tube |
2 x | Angled clevis with threaded rod M3 |
1 x | MPX-Dean "T" Adapter |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Exhaust pipe BX 155 Right |
3 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | Jeti Box mini |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Bag connector 2 mm |
2 x | Parachute BACKUP X100 |
1 x | Tube bender |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
2 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Aramid 50 daN 50 m |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Hacker X-Pro USB interface V2 |
2 x | SE Ring 330 mm (4 pcs) |
3 x | Initior Receiver FRX2 Wireless |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Cable with accesories |
4 x | Paramotor Trike XL |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | JETImodel Addcap 1640 |
2 x | Flap hinge (6 pcs) |
1 x | Tow hook for tug |
1 x | PPM Encoder Module |
2 x | 5 mm M2 variable horn |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
3 x | JIVE 80+LV Esc |
2 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Initior Transmitter FTX2 Wireless |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Stickers-digit for marking |
2 x | Smoke set "M" |
4 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Vacuum pump 12 CFM |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | 120x60 mm C SLH KOVO wheel |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Glases Ace |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Rubber profile 8-2 mm 2M |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | Plasti Dip Liquid Tape 429 ml black |
3 x | 12.7 mm 2:1 black termoretract tube |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | 3l Smoke oil |
1 x | Jeti Advance Plus Program Card |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | ESC YGE 8 S |
3 x | Horn 5/10 with M2 Bearing |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Conector JR Servo male (10 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Propeller balancer |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Sealing Iron Sleeve STD |
1 x | Fixed launching hook |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Short ball link M2 (6 uds) |
3 x | ABS Strip 1.5x3.0x1000 mm |
2 x | Swing 1000 |
1 x | Field folding model stand |
1 x | Long ball link M3 (6 uds) |
3 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Conector BEC female (10 pcs) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Green smoke canister 100 g |
1 x | Extra long horn 60x30 |
1 x | 1/12 Pilot "Cougar" |
2 x | Strip 2,0x2,0x330 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Horn mando long (2 pcs) |
3 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Small Crow DLE-170M |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Allen wheel collar M3x5 |
3 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | Windsock Ozone L - 700 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Field folding model stand SebArt |
1 x | Adaptador USB - YGE |
1 x | M3 INDUSTRIAL ball link (2 uds) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
3 x | Strip 1,5x1,5x330 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Medidor ángulos y/o incidencias |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Conector JR Servo female (10 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Servo NARO Max Std |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
6 x | Indoor hinge with servo arm integraded |
3 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Slave-cable USB Easy Sim |
3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Socket head ball link M3 (2 uds) |
2 x | Paramotor BackPack XXS 2 |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Vacuum pump P1-N |
1 x | Universal Filter |
3 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Horn DUBRO 1/2A |
1 x | Cooler motor type 400 |
1 x | Cooler motor type 300 |
1 x | |
1 x | Motor holder for AC 28/7 |
1 x | Cooler motor type 150 |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
2 x | EVOLUTION 10 GX gasoline motor |
2 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | DUPLEX 2.4GHz GPS |
1 x | Cable coupler M2 (10 uds) |
2 x | DUPLEX 2.4EX Central Box 320 |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Ball Link ALU M3 - RH (1 pcs) |
2 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
2 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2.4EX MULi 6s M |
3 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | DSM 10 Dual Switch Mixer |
2 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | Black large kwik link (10 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Cable coupler M2 (10 uds) |
2 x | AddCAP 10AS capacitors |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2.4EX Central Box 220 |
2 x | DUPLEX 2.4EX MFlow2 Gas 800 |
2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Brass control horn M2 long for wire (10pcs) |
1 x | KOBY 70 LV Esc |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Long horn 50x26 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
2 x | KOBY 90 LV Esc |
1 x | CM-3 |
1 x | 6 mm M3 variable horn |
3 x | KOLIBRI 90 LV-I Esc |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
2 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
2 x | JIVE 120+HV Esc |
2 x | Rudder forward 90x28 "type Kato" |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Adapter lead MPX/EC3 |
1 x | Horn mando small (2 pcs) |
2 x | Micro control horn T2 Ø 1 |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Rudder forward 80x28 "type Kato" |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Horns indoor |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Adapter lead MPX/XT60 |
2 x | JIVE 100+LV Esc |
1 x | Ventus 1:4 set of instruments |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Rudder forward 70x28 "type Kato" |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
2 x | ESC KOLIBRI 140 HV-I |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | PowerBox MERCURY SR2 |
1 x | PowerBox iGyro SRS |
3 x | Pin hinge 34x16 mm (10 uds) |
1 x | Propeller set 400 (2R+2L) |
1 x | PowerBox ROYAL SRS |
1 x | Extension for LC-Display 50cm |
2 x | PowerBox DigiSwitch V2 MPX/JR |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
3 x | 18 mm reinforced hinge |
1 x | External LED's (2 pcs) |
1 x | 2 piece mounting frame |
1 x | PowerBox PROFESSIONAL |
1 x | Extension for SensorSwitch 30cm |
1 x | Piloto JET 1:3,5 |
1 x | PowerBox Evo |
1 x | Motor OS 3820-1200 electric |
1 x | PowerBox iGyro SAT |
1 x | PowerBox DigiSwitch V2 JR/JR |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | FesEx-Uni8 System |
3 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Extension for SensorSwitch 60cm |
1 x | Surface Indicator Gauge Small |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | BlueCom™ Adapter (iOS) |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
1 x | Motor OS 3805-1200 electric |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
2 x | SAITO FG-36 carburetor |
3 x | ESC RAY G2 R-20B BEC |
2 x | ESC RAY G2 R-60SB SBEC |
1 x | Reed valve for DA 50-R |
1 x | BULLIT Wing 840 mm |
1 x | BETA 1400 ARF Red |
2 x | PARAGON Trainer 46-55 1580 mm |
5 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | CESSNA 50E White/Blue |
1 x | FunCup XL RR |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Dia. 25x20 mm tefon tube for escape |
2 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | BULLIT Wing 1095 mm |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Receiver bed (Blue) |
1 x | DRACO 2.0m Wheel set |
1 x | DRACO 2.0m PNP |
2 x | BETA 1400 RTF Red |
1 x | Extension 7.5 cm |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Extension 15 cm (Futaba) |
1 x | Motor mount VANQUIST 48" F3A |
3 x | Robart Door Hinge (Pk2) |
1 x | Miniature brass strap hinge, 1 m |
4 x | Round flex hinge (12 uds) |
1 x | Cabel "Y" 15 cm |
4 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Premium servo extension 100cm |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Electric rocket starters (6 pcs) |
1 x | JETCENTRAL ECU LIFE BATTERY 3800 MAH |
1 x | Turbine CHEETAH 160 SE |
1 x | Turbo Prop KS |
2 x | AX-60 starters (5 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
2 x | Light System |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
2 x | Electric starter BEE (old) |
1 x | TARANIS Q X7 |
1 x | Emisora HORUS X10S Carbone Fiber |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | "M" set |
1 x | AX-60 starters (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Red smoke canister 65 g |
3 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Dual Sequencer Gear and Canopy |
1 x | Turbine RHINO 200 SE 20.4 Kg |
1 x | Variable Flow Smoke Pump System |
2 x | Telemetry JETI |
1 x | 15 mm gas motor standoff |
2 x | DINO Glider ARC |
3 x | 30 mm gas motor standoff |
1 x | BABY glider drawings (Aero-naut) |
1 x | Glider IKARUS |
1 x | Antenna holder bracket double |
1 x | E-FUN BUG (ROI-Import) |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Ballast 700gr OPALE |
1 x | 7 mm gas motor standoff |
2 x | Glider PIROL |
1 x | 180° TUBE-ANGLE Ø 25 mm |
2 x | COMFORT MOUNT ø 60mm |
1 x | Parachute P4 |
3 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | 90° TUBE-ANGLE Ø 28 mm |
2 x | 10 mm gas motor standoff |
2 x | Canister combo DLE 120 cc |
1 x | X-RAY Micro QR |
2 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | ESC MEZON 115 Opto |
4 x | X-RAY Micro QR (Tail Tube) |
2 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | LOWER TOW HOOK |
2 x | 20 mm gas motor standoff |
1 x | 200 mm extensión servo HITEC/JR |
2 x | Dia. 20x15 mm teflon tube for escape |
1 x | SERVO HOLDER |
1 x | Para-RC Mix |
1 x | 280 cc gasoline fuel tank complet |
2 x | COMFORT MOUNT ø 25 mm |
2 x | 25 mm gas motor standoff |
1 x | X-RAY Micro QR (Rudder) |
1 x | Rescue 1,8m2 / BackPack |
1 x | Set cintas unión paracaídas 145 cm |
2 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | 45 mm gas motor standoff |
2 x | Canister combo DLE 111 cc |
2 x | Carburetor menbrane for ZG 45SL/ ZG62/S/SL motor |
1 x | 35 mm gas motor standoff |
1 x | X-RAY Micro QR (Elevator) |
2 x | 50 mm gas motor standoff |
1 x | Canister combo DLE 120 cc |
1 x | 9x4.7 * 22x12 carbon propeller |
2 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Monokote ROJO misil (1.8x0.65m) |
2 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Motor DA 150 |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Motor D.A. 200 Magnesium |
1 x | Oracover CARBON Metalic 1 m |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
2 x | Yellow smoke canister 140 g |
2 x | 90x45 mm hard foam KOVO wheel |
2 x | Oratex White 2m |
1 x | Oracover Yellow CADMIO 2 m |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Monokote BLANCO jet (1.8x0.65m) |
3 x | Ply-Span 450x600/13g Orange |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
2 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | ABS I Strip 20x10x1000 mm |
2 x | Oracover Yellow CADMIO 10 m |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | DA 70 Twin Gas Engine |
2 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | Oracover White 10 m |
1 x | Oracover Azul 2 m |
2 x | Oratex Red Fokker 10 m |
1 x | Oracover ROYAL RED 2m |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | MYLAR film A350 (1000x500 mm) |
2 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Strip 2,5x1,25x330 mm |
1 x | Foil for sticking flaps and ailerons |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Motor DA 120 |
1 x | Oracover light Grey 2m |
2 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Oracover White 2 m |
1 x | Oracover Yellow CUB 10 m |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Screwdriver for Torx® TX6 |
1 x | LiPo TopFuel ECO-X 3800mAh 2s 20C MTAG |
2 x | Small pinned hinge (12 uds) |
1 x | 15x7 tree blades propeller |
1 x | Motor Moki S 250 cc 5 cylinders |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Electric coversion set |
1 x | Heli blades angle measurer |
1 x | A60 Motor Mount Alu complete set |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Propeller APC 10x10 Electric |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Canopy F9F Panther (Aero-naut) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo |
1 x | Esc MasterBasic 70SB |
2 x | Digital precision scale up to 2000 g |
1 x | 6 mm M3 variable inclined horn |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Motor mount EDGE 540 48" |
1 x | Propeller POWER-PROP 13x10 |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | UHU hart 35 g |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Rear crankcase DA-50R |
2 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | MPX PCB "Gender-Changer (5 pcs) |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Cable video GoPro |
3 x | PC-21 2.880 mm WHITE/RED |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Angle of incidence meter |
1 x | Esc KOSMIK 160 HV |
2 x | JetiBOX |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Giant Scale Muffler D.A. 70 |
1 x | JETI transmitter DC-14 II Green Multimode |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
3 x | 3,0x60 mm allen screwdriver |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Adjustable launching hook |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Program Card G2 RAY |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Horn 6/27 with M3 Bearing |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | ESC YGE 205 HVT BEC |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Medium pin type hinge (12 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | LA500 rotor head core |
2 x | LA500 front gear holder |
2 x | ESC MEZON 120 Lite |
1 x | EDF Ducted Fan JP Hobby 80mm + 6s Motor 2200KV (CCW) |
2 x | LA500 housing-upper cyclic |
1 x | Transmitter Stick Ends JETI DS-16/14 |
2 x | SBEC 30 D |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
3 x | Autogyro Cierva C30 Spain |
2 x | Electronic switch JETI SP06 Opto |
1 x | EDF Ducted Fan JP Hobby 120mm + 12s Motor 760KV (CW) |
3 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
2 x | Head upper part |
3 x | Complet landing gear |
1 x | DUPLEX R10 receiver REX Assist |
1 x | DUPLEX 2.4EX Central Box 210 |
2 x | Car Charger DC/DS-16 |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Metal clevis M2 (10 uds) |
1 x | wire tensioner (blue) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | M3 black washers (4 pcs) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | SPS Remote switch actuator |
1 x | Motor NGH GF 150 R5 |
1 x | SPS 70V 140/280 A |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Carbon plate 350x150x3.0 mm |
2 x | PSC 5 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | SBEC Jeti |
1 x | SlowFlyer control horn (3 pcs) |
3 x | Micro control horn (2 pcs) |
1 x | Small aluminium horn gold (2pcs) |
2 x | Small adjustable control horn with bearing |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Short adjustable control horn 3x24 |
1 x | SWTU2 switch |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | PSC 6 |
2 x | Multi-adapter balancer JST - TP |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | MAX BEC 2 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Horn 5/20 with M2 Bearing |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | FesEx-Uni6 System |
1 x | PowerBUS Splitter |
1 x | PowerBUS Lead 30 cm |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
3 x | Ply-Span 450x600/13g Black |
2 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | |
1 x | Dia. 25x5 mm tefon tube for escape |
3 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
2 x | Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm |
1 x | PowerBox VRegulador 6.0v |
1 x | USB interface ALTIS |
1 x | PowerBox Spare part magnetic sensor |
1 x | FuelTank Cap (blue) |
3 x | TX Tray V1 Hand Rests only |
1 x | Fuel dot V3 (Silver) |
1 x | JOKER 3 1550mm |
2 x | EDGE XL Orange |
1 x | WINGO 2 ARF |
1 x | Turbina X132 H "Compact Version" |
1 x | EXTRA 300L 1.2 m Blue |
1 x | Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2 |
1 x | Turbina X45 H "compact" |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | WINGO 2 PNP |
1 x | Fuel dot Gold color |
1 x | Hose clips 6 mm |
1 x | DLE 55 carburetor |
1 x | MAULE M-7-420 2.8m Red |
1 x | Turbo Timber Evolution 1.5m BNF |
2 x | Large flex hinge (12 uds) |
2 x | Turbina XICOY X180 light |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Caps multicolor Switch JETI |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Suction funnel for carburetor 90D-L (red) |
2 x | FuelTank Cap (red) |
2 x | Black tray 2,4EX DC-16/14/24 black |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Fuel line plugs (Silver) |
2 x | FunCub NG azul RR |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
2 x | Cable coupler M3 (10 uds) |
2 x | Cable coupler M3 (10 uds) |
2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop right) |
1 x | Spark Ceramic JETCENTRAL |
1 x | Colador RABBIT |
1 x | Turbina DRAGON 30 Kg |
2 x | Propeller CFK 13x9 |
1 x | Propeller CFK 14x8 Slim |
2 x | Propeller CFK 14x7 |
2 x | Small aluminium horn blue (2pcs) |
1 x | Propeller CFK 15x7 |
1 x | Propeller RF CFK 10x17 |
1 x | Propeller CFK 18x19 |
1 x | Propeller CFK 14x6.5 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Propeller CFK 12.5x7 |
2 x | Propeller CFK 15x16 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | PC-21 XXL 3.395 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Propeller CFK 15x13 |
1 x | Motor Scorpion HKIII 4035-560 Kv |
2 x | CAM-Carbon Light Prop 13x5" Q500 (Prop left) |
2 x | Campana Ms 14 mm (5 pcs) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | 89 mm double servo arm with bearing (2 pcs) |
2 x | SD HC 8 GB |
2 x | CAM-Carbon Light Prop 9x6" |
1 x | Festo 6mm Tubing Holder (10 uds) |
2 x | Catalog AERO-NAUT 2016 |
2 x | FELIX SportJet Blue/Green 2200 mm |
2 x | BD-5J ARF+ |
3 x | PC-21 2.880 mm SINGAPUR scheme |
2 x | CAM-Carbon Light Prop 13x5" Q500 |
2 x | Capstan of plastic 88x30x36 mm |
2 x | CAM-Carbon Light Prop 9x5" (Prop right) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | 65 mm mini servo cover |
1 x | 50x45 mm micro-mini servo cover |
1 x | Turbine LYNX 130 |
2 x | Bluetooth Adapter JET CENTRAL |
1 x | Charger LiPo Charger4 |
2 x | Propeller RF CFK 16x8,5 S |
1 x | SKY MASTER 3.000 mm ARF |
2 x | Long adjustable control horn with bearing |
1 x | TARANIS X9D - plus EU/LBT FrSky |
1 x | BABY glider (Aero-naut) |
1 x | Telemetry SPEKTRUM |
1 x | NoNa BB wheel Ø150x45mm in pair |
1 x | Oratex Natural White 2m |
1 x | White smoke bombs AX-3 (10 pcs) |
2 x | Motor DA 85 |
2 x | Superlight deluxe wheel 40 mm (2 pcs) |
1 x | Dia. 16x35 mm PTFE tube for escape |
3 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Tufnol Choke Lever Arm d=4,7mm |
3 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
2 x | Nose wheel 62 mm |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Oratex Yellow Cub 10 m |
1 x | Metalic joint for DA-150 cilinder/elbow |
2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Fixing Ring with Base 40 mm |
1 x | PROFICOVER 5m |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | Oracover Yellow CUB 2 m |
1 x | Tail boom |
1 x | LA500 pre-rotation gear |
1 x | Screws flush mount M2 |
1 x | Motor wall |
2 x | LA500 rotor head shaft |
1 x | Wheel keeper washer |
2 x | Side rudder |
2 x | Fiberglass plate 350x150x1.5 mm |
2 x | Fiberglass plate 350x150x3.0 mm |
2 x | Jeti SPIN 55 Pro |
1 x | Jeti Spin 300 OPTO |
1 x | Tension Springs (4pcs.) for DC/DS Tx DUPLEX 2,4EX |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | MB-339 Aermachi 84" ARF c/retractil electric |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
2 x | Bearing 3x6x2,5 |
1 x | LA500 cyclic central part |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 nose |
2 x | Blades 330mm |
1 x | Head lower part |
2 x | Head spacer |
1 x | Raer wall |
2 x | Screw M3x16 |
1 x | Cierva C30 Body Spain |
2 x | Rotorshape Elevator |
2 x | Screws M1,6x6 Allen |
1 x | Blade holder upper |
1 x | Washer 2.2×4 |
1 x | LA500 freewheel bearing |
1 x | EDF Jet-Flex 80 - 8 Kg |
1 x | LA500 housing-lower cyclic |
2 x | Ball joint long |
1 x | Nut M1,6 |
1 x | Pilot LA 500 |
2 x | LA500 Autogyro |
2 x | Baal link 4/14/4 (5 pcs) |
1 x | Battery plate |
1 x | Balls 4 mm |
1 x | Nut M2 |
2 x | Blade holder lower |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | JETI SPIN 80 Pro |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Jeti Spin 200 OPTO |
2 x | Fiberglass plate 350x150x2.5 mm |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Jeti SPIN 33 Pro |
1 x | Jeti Spin 220 Pro OPTO |
1 x | PHASOR RACE 2035/2100 2D |
1 x | Switch for DS: Long 2 Position |
2 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
2 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Jeti SPIN 66 Pro |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | JETI Counter for DC-24 Carbon Design 3 |
2 x | Fiberglass plate 620x540x1,0 mm |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | PHASOR RACE 2035/4100 1D |
1 x | RC Power Switch 5A |
1 x | Switch for DC: Long 3 Position |
1 x | Jeti Spin 22 |
1 x | Tray JETI for DS-12 Black |
1 x | Foam plastic plates (310x210x5 mm) |
2 x | Foam plastic plates (310x210x8 mm) |
2 x | Fiberglass plate 620x540x0,2 mm |
1 x | Foam plastic plates (310x210x2 mm) |
2 x | Foam plastic plates (310x210x3 mm) |
2 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Jeti Spin 77 OPTO |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Jeti Spin 99 OPTO |
2 x | Fiberglass plate 620x540x0,3 mm |
1 x | JETImodel DPS 40 |
1 x | Fiberglass plate 620x540x3,2 mm |
2 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Switch for DS: Short 2 Position |
2 x | Fiberglass plate 620x540x2,0 mm |
2 x | Film release agent PVA 25 ml |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Long adjustable control horn 3x34 |
1 x | SPARK Switch 12v |
2 x | Opto Gas Engine Kill Switch |
1 x | Motor NGH GF30 |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 30 mm servo rounded arm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 2x20 mm servo double arm |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Adapter rotula M3 |
1 x | Futaba 20 mm servo arm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Turbofan 2000 NG |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | SPARK Switch 5.9v |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Switching module high voltage SXH |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Female connector for 12 pines AWG |
2 x | Female connector for 6 pines AWG |
1 x | PowerBox SparkSwitch RS |
1 x | Male connector for 12 pines AWG |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | REVOLTO Blue |
1 x | Transmitter Stick Ends V1 Silver - M3 (2 pcs) |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | Turbina X45 H "Light Version" |
2 x | 90x60 mm standart servo cover |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | White spinner propeller pleg. 36 mm / 5 mm |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
2 x | Servo TOPMODEL S7520 MG |
2 x | Turbina JetsMunt M166TS |
1 x | Propeller CFK 12.5x6.5 |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 18x17 |
1 x | Propeller CFK 17x13 |
1 x | Kwik link unmount tool |
1 x | Cut tube |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Extension 2/3 lipos JST - JST/C |
2 x | VIPER SL NAVY PNP 2270 mm |
2 x | VIPER SL YELLOW PNP 2270 mm |
1 x | PC-21 2880 mm Spinner 5Blade blue |
2 x | PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite |
2 x | BD-5J PNP |
1 x | PC-21 2880 mm Spinner 5Blade red |
1 x | Capstan of plastic 91x44x45 mm |
1 x | 45 mm aluminium spinner. |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | Servo TOPMODEL DS9010 T |
1 x | 13 mm wing servo holder |
1 x | Glidder Mü13e (Bergfalke) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Oracover Orange 2 m |
1 x | Futaba 38 mm servo arm |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Hitec 38 mm servo arm |
1 x | Futaba 38 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Hitec 30 mm servo rounded arm |
1 x | Horizontal mounting servo holder |
1 x | Futaba 52 mm servo arm |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Vertical mounting servo holder |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Hitec 52 mm servo arm |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | DRACO 2.0m landing gear |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Fuel dot V3 (Blue) |
1 x | FunCub NG verde RR |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Wheel 38 mm V2 |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | Turbina XICOY X95 compact |
1 x | BULL MØ1 2.600mm "AeroPANDA" |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Spinner black 40-45mm |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Precision wrench L100 mm |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Propeller RF CFK 13x7 |
1 x | Propeller CFK 14x8 |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller CFK 16x13 |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
2 x | Propeller CFK 18x16 |
1 x | Dumper propeller 6/8 mm |
1 x | Connector Sub-D 2+5 Female |
2 x | FELIX SportJet Red/Yellow 2200 mm |
2 x | FELIX JR Yellow/Black 1750 mm |
2 x | PC-21 2.880 mm BLUE French Army Scheme |
2 x | Boeing (TX) T-7A Camo |
2 x | MIRAGE 2000 RED/BLACK PNP |
1 x | MB339 CANADA PNP 1790 mm |
2 x | PC-21 2880 mm Electric Landing Gear |
2 x | VIPER SL Gold PNP 2270 mm |
1 x | PC-21 2.880 mm RAAF Sheme |
2 x | Electric Landing Gear FELIX SporJet 2.200mm |
2 x | FELIX SportJet Yellow 2200 mm |
2 x | Spinner PC-21 JMB-Jets red 3 blade |
2 x | PC-21 2.880 mm RED |
1 x | Boeing (TX) T-7A RED HAWK |
2 x | MB339 Freece PNP 1790 mm |
1 x | JMB-Jets K8 Trainer Jet PNP 2050 mm |
1 x | FELIX SportJet Blue 2200 mm |
1 x | SCHOCKJET ARF 2.050 mm |
2 x | FELIX JR Red/Yellow 1750 mm |
1 x | MIRAGE 2000 Camuflage PNP |
2 x | PC-21 2.880 mm (w/o oracover) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | CAM-Carbon Light Prop 14x6" (Prop left) |
1 x | MXS-C (Mini) Blue |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop left) |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | CAM-Carbon Light Prop 8x4.5" (Prop left) |
1 x | CAM-Carbon Light Prop 12x6" |
1 x | DRACO 2.0m Helice 14.5x9 4-Blade |
1 x | Central piece 38 mm 0º |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Cannon 53/6 mm |
1 x | Capstan of plastic 125x72x45 mm |
1 x | CAM-Carbon Light Prop 14x6" (Prop right) |
1 x | Canadair CL-415 (aero-naut) |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
1 x | CAM-Carbon Light Prop 13x6" (Prop left) |
1 x | CAM-Carbon Light Prop 13x5" (Prop right) |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | 57 mm micro-mini servo cover |
1 x | FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M |
1 x | 58 mm micro servo cover |
1 x | 90x75 mm standart servo cover |
1 x | 3D Spinner for DLE 30 |
1 x | Turbina JetsMunt VT98 NG |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | 70 mm aluminium spinner. |
1 x | 11 mm wing servo holder |
1 x | Servo TOPMODEL DS1413 T |
1 x | 64 mm aluminium spinner |
1 x | Turbina JetsMunt M122 NG |
1 x | 57 mm aluminium spinner. |
1 x | Telemetry adapter JestMunt |
1 x | 76 mm aluminium spinner. |
1 x | 18 mm wing servo holder |
1 x | 60 mm aluminium spinner (Kavan) |
1 x | 89 mm aluminium spinner. |
1 x | 38 mm aluminium spinner. |
1 x | Flex-headers for Valach VM 85B2-FS |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | VALACH VM 85 B2-FS |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
2 x | Plastic wheels 36 mm (2 pcs) |
2 x | PVC transparent battery termo-retract 51 mm (1 m) |
2 x | Propeller diller for EME35 and DLE35 |
2 x | Plastic wheels 28 mm (2 pcs) |
2 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=16mm |
1 x | NoNa BB wheel Ø125x35mm in pair |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Set stickers JEEMO "Andy" |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | Head runner |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Rotor Mast |
1 x | Servo Fork |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | MRPM-AC revolution sensor |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Master MEZON 120 |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | switch 1-Spring-UP 3-position DS Tx DUPLEX 2,4EX |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Red 3m5 mm connector holder |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
2 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m |
1 x | Wheels 270mm (2 pcs) |
1 x | L ELBOW 90º ø 25 mm |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
2 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | COMFORT MOUNT ø 55 mm |
1 x | Wheel ø180 mm AIRTOP Ballon pneumatic |
2 x | Plastic wheels 30 mm (2 pcs) |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
1 x | Connectors MPX male |
1 x | Superlight deluxe wheel 56 mm (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | Giant Scale Muffler D.A. 150 (2 pcs) |
1 x | Giant Scale Muffler D.A. 70 (2pcs) |
1 x | Pitts Muffler for D.A. 100 |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Ø 50-60 mm canister holder |
1 x | EXHAUST STACK Ø 25 mm GP-61/123 |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | 40 mm gas motor standoff |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | EXHAUST STACK Ø 28 mm DA75/150B2 |
1 x | NoNa BB wheel Ø105x35mm in pair |
1 x | Selfstart electronic switch |
1 x | Canister combo DLE 55 cc |
1 x | Dia. 15x25 mm tefon tube for escape |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | Dia. 28x15 mm PTFE tube for escape |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | Lightweight aircraft wheel, 55x18.5x3 |
1 x | Stainless Steel Tuned Pipe for engines from 45 to 80 cc |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m |
2 x | NoNa BB wheel Ø200x60mm in pair |
1 x | TUNED PIPE for motors up to 40-60 & 70-85 cc |
1 x | Saito FG-36 motor support |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Pitts Muffler for D.A. 120 |
1 x | Rotorhead pushrod |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Fuselage Bags JEEMO |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | LA500 pilot-seat set |
1 x | Rotorshape Autogyro |
2 x | Blade holder center |
2 x | Nut M2 securing |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Tx JETI Duplex DC-24 II Carbon Line Ruby |
1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | EnLink 2RS Plus - DUO |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | DUPLEX case for Jeti DS handheld transmitter |
1 x | Foam wheel Ø 38 mm (2 pcs) |
2 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Ply-Span 450x600/13g Red |
1 x | Escape Krumscheid 81-6 hasta 55 cc |
1 x | Jet wheels 65 mm E-brake 4 mm shaft |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
1 x | Stainless Steel Bend D 18x0,5 mm |
1 x | JETImodel Addcap 820 |
2 x | Superlight deluxe wheel 68 mm (2 pcs) |
2 x | Mini wheels (3 pcs) |
1 x | NoNa BB wheel Ø130x40mm in pair |
2 x | Superlight deluxe wheel 45 mm (2 pcs) |
2 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Wheels 220mm (2 pcs) |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Menbrane joint for DA 50-R |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | 76 mm light wheels (2 pcs) |
1 x | Opto Gas Engine Kill Switch |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | D.A. Fueling Valve |
1 x | Captador OS GT 33 cc |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
1 x | Pendulun "luxe" to tank |
1 x | Pendulun "Special" to tank 75g |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
2 x | NoNa BB wheel Ø175x55mm in pair |
1 x | Foam air filter Ø 48 mm, blue |
1 x | Silencer with rear exhaust DA-120 |
1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Fixing Ring with Base 60 mm |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Silencer with rear exhaust MTW TDH 110 |
1 x | Futaba F14 Twin Boat Stick |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | DA-50R motor alumine support |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | KS86 S-6 muffler up to 65cc |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Stainless Steel Bend D 25x0,5mm |
2 x | Superlight deluxe wheel 50 mm (2 pcs) |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | Tail support (2 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Wings Bags JEEMO |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | wire tensioner (red) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Super DECATHLON Red 2.450mm |
![](images/pixel_black.gif) |
321,745.50EUR |