2 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 9.0x8.0x1000 mm |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
5 x | ABS tube 9.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Xplorer2 anemometro |
1 x | Xplorer3 anemometro |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
3 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Propeller POWER-PROP 14x9 Izda |
2 x | DUPLEX 2.4EX Central Box 210 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Digital scale up to 40 kg |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Bungee HLG Premium |
1 x | Support FUEL DOT V3 |
1 x | Angle support XT60 conector |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | ABS tube 3.0x2.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Motor OS 3820-1200 electric |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Propeller POWER-PROP 13x9 |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Round Rod 2,5x1000 mm |
2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
2 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
2 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
2 x | Soporte servo KST X08/H and Plus |
1 x | USB programador GO servos |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Oracover light Grey 2m |
1 x | Oracover Green10 m |
1 x | Oratex Antik 2m |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Oracover CARBON Metalic 1 m |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Oracover Orange 2 m |
1 x | Oracover Black 10 m |
1 x | Oratex White 2m |
1 x | Oratex Silver 2m |
1 x | Oracover White 2 m |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Oratex Natural White 20m |
1 x | Oracover ROYAL RED 2m |
1 x | Oracover Yellow CADMIO 10 m |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Oracover White 10 m |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | XT-60 connector (female) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | XH LiPo extension lead |
1 x | Connectors MPX black female |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Conector MT-60 (pair) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Propeller POWER-PROP 14x9 |
1 x | LA500 rotor head core |
1 x | Head lower part |
1 x | MPX housing with flange (4 pcs) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Blade Holder (3 blades) |
3 x | 2 mm Prop Adapter M6 |
2 x | 300x4 mm M4 shaft ship |
1 x | 3 mm Prop Adapter M6 |
1 x | Pulley brass 12/2 (2 pcs) |
2 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Kwik link with arm M3xM2xL24 |
2 x | MPX screwable clips (4 pcs) |
2 x | Battery plate |
3 x | Cierva C30 Elevator |
2 x | Bearing housing |
3 x | LA500 Autogyro |
3 x | Head core bushing |
1 x | LA500 rotor head shaft |
1 x | LA500 ciclic lever |
2 x | LA500 housing-upper cyclic |
1 x | LA500 front gear holder |
1 x | LA500 pilot-seat set |
1 x | Ball joint long |
1 x | Blade holder center |
2 x | Cierva C30 simulated motor |
2 x | LA500 housing-lower cyclic |
1 x | Head spacer |
1 x | Head runner |
2 x | Baal link 4/14/4 (5 pcs) |
2 x | Autogyro Cierva C30 Spain |
2 x | Blade holder center GFK 0,5 mm |
1 x | Head core |
1 x | LA500 pre-rotation gear |
2 x | Complet landing gear |
3 x | Head upper part |
2 x | Cierva C30 spanish decoration Stickers |
1 x | Baering 3x8x4 |
2 x | Blade holder lower |
1 x | LA500 freewheel bearing |
4 x | Blade Holder Full (3 blades) |
2 x | 3 blades set |
3 x | Fuselage Autogyro RAINBOW |
2 x | Blade Holder Full (4 blades) |
2 x | 4 blades set |
2 x | Tail tube RAINBOW |
2 x | 15x7 tree blades propeller |
1 x | 15x7 tree blades propeller LEFT |
1 x | 14 mm portholes (10 pcs) |
2 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
4 x | 3.2 mm Prop Adapter M8 |
1 x | 31,0 mm propeller (rigth propeller) |
2 x | 10 mm Prop Adapter M12 |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 290 mm 8x4 M4 shaft ship |
2 x | 3,2 mm Prop Adapter M6 |
1 x | 12x6 tree blades propeller |
2 x | 3.2 mm Prop Adapter M6 |
1 x | 10x7 tree blades propeller |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 11x7 tree blades propeller |
2 x | 2,3 mm Prop Adapter M6 |
2 x | 12x8 tree blades propeller |
2 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
2 x | 250 mm / 16 mm Airbrakes |
2 x | "L" servo arm 65x49 mm (2 pcs) |
4 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 29,0 mm propeller (left propeller) |
1 x | 10 mm portholes (10 pcs) |
1 x | 1000 ml sealer (DOPE) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Ply-Span 450x600/13g White |
1 x | Ply-Span 450x600/13g Red |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
2 x | Servo GO-02 Digital 1.8g |
1 x | Servo GO-09 9g |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | PROFI TX fastening rings |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Ply-Span 450x600/13g Blue |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Starter EM Gear Power 80 |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Refueling Cap V3 Black |
1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | Cleat 10 mm (2 pcs) |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | Connectors MPX female |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | 6 mm Prop Adapter M8 |
1 x | Central piece 52 mm + 2,5º |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Bag connector 2 mm |
1 x | 500 ml sealer (DOPE) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | 30 cm MULTIPLEX female connector |
1 x | Conector MR-60 (pareja) |
1 x | Conector BEC male (10 pcs) |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Motor wall |
1 x | Set EDF Mini Avanti Full Aluminium |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | 4 mm Prop Adapter M8 |
1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Cleat 15 mm (2 pcs) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | Dingi Pl. 26 mm (5 pcs) |
1 x | Cleat 20 mm (2 pcs) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Chigre de amarre Scale 1:32 |
1 x | Central piece 47 mm + 5º |
1 x | Mounting frame MPX male connector |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Central piece 47 mm 0º |
1 x | 42 mm central piece for 4 blades |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Tail support (2 pcs) |
1 x | LA500 pre-rotation gear hub |
1 x | JETFAN JF90 V2 + motor HET 700-60-1865 Kv |
1 x | JETFAN JF80 + motor HET 700-68-2100 Kv |
1 x | EDF 60/15 Mk.2 MEga |
1 x | Capstan of plastic 88x30x36 mm |
2 x | 6 mm Prop Adapter M8 |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
2 x | La Capitania di Venetia accesories |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 45 mm / 6 mm |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Central piece 47 mm - 2,5º |
1 x | Central piece 72 mm 0º |
1 x | Chain 1.5mm x 1m |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Central piece 52 mm - 5º |
1 x | Gold antispark 5,5 mm plug |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Central piece 42 mm + 5º |
1 x | Conector JR Servo male (10 pcs) |
1 x | 12 mm portholes (10 pcs) |
1 x | Gold antispark 4 mm plug |
1 x | 30 cm DEANS female connector |
1 x | 40 mm black plastic spinner for fixed propeller |
1 x | Connectors MPX male |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | Conector JR Servo female (10 pcs) |
1 x | 42,0 mm propeller (left propeller) |
1 x | Central piece 42 mm - 2,5º |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Doppelpoller 17 mm (6 uds) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | Conector JR Servo female (10 pcs) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | Conector XT-30 (macho) |
1 x | Conector JR Servo female (50 pcs) |
1 x | Rocket D9-7 |
1 x | Rocket D3-P |
2 x | Bearing 3x6x2,5 |
1 x | Motor rotor LA-500 |
1 x | LA500 nose |
1 x | Nut M2 |
1 x | Rotorshape Elevator |
1 x | Steering lever |
1 x | Turbina KINGTECH K320 G5 |
1 x | Servo Fork |
1 x | Screws M1,6x6 Allen |
1 x | Screws flush mount M2 |
1 x | Wheel keeper washer |
1 x | Blades 330mm |
1 x | Pilot LA 500 |
1 x | MiniFan 480 |
1 x | Turbofan 2000 NG, rotor |
1 x | Aceite SHELL 560 Turbina 0.9Kg |
1 x | Propeller Pleg CAM Carbon 18x11 |
1 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
1 x | Turbofan 2000 NG |
1 x | Turbofan 1000 |
1 x | Cadena 1.0mm x 1 m |
1 x | Dumper propeller 6/8 mm |
1 x | Klumpblock (Plastik), Höhe 6 mm, 1 Rille, 20 Stück |
2 x | SCHARNHORST Battleship 1:200 |
1 x | BOX-Setup Actro-marine |
1 x | Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück |
1 x | Aero-Master Fuselage (Aero-naut) |
2 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Klumpblock (Plastik), Höhe 3 mm, 1 Rille, 20 Stück |
1 x | 4 mm Prop Adapter M8 |
2 x | Aero-Master Wings (Aero-naut) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Aero-Master (Aero-naut) |
1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Capstan of plastic 91x44x45 mm |
|
16,948.53EUR |