1 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita con funda |
1 x | Ferrita 27x14x7 mm |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
2 x | Lock washer 2.7 mm (20 pcs) |
3 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Flat washer 4.3 mm (20 pcs) |
3 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | M3 black washers (4 pcs) |
3 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | PIX Hawk with accesories |
1 x | Round Rod 1,25x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Round Rod 4,0x1000 mm |
2 x | Round Rod 1,0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
2 x | Round Rod 1,5x1000 mm |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Pilot "Anthony" (Slimline) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Horn 6/27 with M3 Bearing |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Xplorer3 anemometro |
1 x | Yellow smoke canister 140 g |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Screw M3x8(10 pcs) |
2 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Support XT60 conector (2 pcs) |
2 x | 10 mm floating pad (72 pcs) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
3 x | Blind nut M5 (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Screw M3x20 (10 pcs) |
2 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Tube support Ø 6mm (10 pcs) |
2 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
2 x | Glass Bubbles (0,12 g) 350 ml |
2 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Blind nut M3 (4 pcs) |
2 x | Ventus 1:4 set of instruments |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
3 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Lock nut M5 (20 pcs) |
2 x | Threaded insert M6 (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
3 x | 3.2 mm Prop Adapter M6 |
1 x | SCHARNHORST accessories |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 2,3 mm Prop Adapter M6 |
2 x | Aero-Master Wings (Aero-naut) |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
2 x | 3 mm Prop Adapter M6 |
1 x | 10 mm Prop Adapter M12 |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | 5 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | La Capitania di Venetia accesories |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 4 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter CN-Spinner |
2 x | 2,3 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 2 mm Prop Adapter M6 |
1 x | 6 mm Prop Adapter M8 |
2 x | Aero-Master Fuselage (Aero-naut) |
1 x | Aero-Master (Aero-naut) |
1 x | 6 mm Prop Adapter M8 |
2 x | Propadapter for motor A60-V2 |
1 x | Support pump Xicoy X45 |
1 x | Support ECU Xicoy X-45 |
1 x | Vasa model Catapult |
1 x | Propeller diller for DLE170 |
3 x | Bungee HLG Premium |
1 x | Cotton Flocks, bag/ 7 Kg |
3 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Lock nut M3 (10 pcs) |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Tacometer mini ignition RCEXL |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Filler Gauges |
1 x | Propadapter for motor A50-V3 |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Servo NARO Max Std |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Hovercraft sailcloth |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Nylon Screw M6x40 |
1 x | Threaded insert M4 (4 pcs) |
1 x | Threaded insert M5 (10 pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Lock nut M5 (10 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | TWIST planeador gomas |
2 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | CAM-Carbon Light Prop 12x5" (Prop right) |
1 x | Canopy F9F Panther (Aero-naut) |
2 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 14 mm portholes (10 pcs) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Turbine HORNET 85 SE |
1 x | Cannon 53/6 mm |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | CAM-Carbon Light Prop 9x5" (Prop right) |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | 290 mm M4/4 mm Prop shaft |
2 x | 10x7 tree blades propeller |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Turbo Prop KS |
1 x | Turbine RABBIT 100 SE 11 Kg |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Central piece 38 mm 0º |
1 x | Catalog AERO-NAUT 2016 |
1 x | CAM-Carbon Light Prop 12x7" |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop right) |
1 x | CAM-Carbon Light Prop 14x6" (Prop left) |
1 x | CAM-Carbon Light Prop 13x6" (Prop left) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | CAM-Carbon Light Prop 13x5" (Prop right) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | CAM-Carbon Light Prop 8x4.5" (Prop left) |
1 x | CAM-Carbon Light Prop 12x6" |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | Capstan of plastic 91x44x45 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 29,0 mm propeller (left propeller) |
1 x | Ancla 35 x 22 mm (2 pcs) |
2 x | 11x7 tree blades propeller |
2 x | 15x7 tree blades propeller |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 12x8 tree blades propeller |
1 x | ALU servo arm 3 mm shaft |
1 x | 300x4 mm M4 shaft ship |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | 1000 ml sealer (DOPE) |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Actrocon 60A ESC |
1 x | 31,0 mm propeller (rigth propeller) |
|
13,619.90EUR |