430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]

Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
2 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 3.0x2.0x330 mm
3 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
3 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	ABS tube 3.0x1.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
2 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
2 x	ABS tube 7.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 8.0x7.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
3 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
3 x	Pine wood slat 3.0x10.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
3 x	Spikes Band (5 m)
2 x	SE Ring 240 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 250 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Tape GFK 25 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	SE Ring 480 mm (2 pcs)
2 x	SE Ring 300 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 50 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Locking cable tie 3.2x142 (uds)
1 x	CM-3
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Support conector MPX (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	25 mm carbon servo arm
1 x	1/10 Pilot "Jack"
1 x	1/12 Pilot "Langley"
1 x	160 mm carbon undercarriage (2pcs)
1 x	102 mm INO spinner (carbon imitation)
1 x
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	Balsa panel 4.0x100x1000 mm
3 x	BALSA trip 10x10x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
3 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	TX 250 mW especial GOPRO
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Landing lights 18 mm (0.71in)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	TAKEO 3.6m electric
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Ball Link Plier
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Digital precision scale up to 2000 g
1 x
1 x	Screwdriver for Torx® TX6
2 x	Round Rod 5,0x1000 mm
2 x	ABS Strip 1.5x6.0x1000 mm
2 x	Strip 1,5x1,5x330 mm
2 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.0x2.0x1000 mm
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Blue aluminium servo arm V3-Hitec 1,25inch M3
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Red aluminium double servo arm FUTABA 2,5inch M3
1 x	POLARON EX 800w charger
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Canopy Latch
1 x	Foam plastic plates (310x210x2 mm)
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Ciano KAVAN Thin 20g
1 x	Pin hinge 26x11 mm (10 uds)
1 x
1 x	KAVAN CA Activator 150ml
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Ciano KAVAN Super Thin 20g
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
2 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
2 x	PHASOR RACE 2035/2100 2D
1 x	ABS angle 2,0x2,0x1000 mm
1 x	PHASOR RACE 2035/4100 1D
1 x	Glow starter with charger 230v
1 x	Kavan Car 25% nitro 1l
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Glow Plug Clip 1.3 Ah
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
2 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Spinner 40 mm Black (Kavan)
1 x	Ciano KAVAN Medium 20g
1 x	Electric Fuel Pump 12v
1 x	Ciano KAVAN Thick 20g
1 x	XT60 Connector with Holder Male 2pcs
1 x	Engine mounts for .09 - .19 engine
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Adaptadores carga 6s JST-XH
1 x	BETA 1400 RTF Red
1 x	Conector MT-60 (pair)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
2 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
3 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
2 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	20 mm gas motor standoff
1 x	Turbina XICOY X180 compact
1 x	Turbina X45 H "Light Version"
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium ignition bad (blue)
1 x	35 mm gas motor standoff
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
2 x	Birch plywood plate 600x300x4.0 mm
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Grafas ARF 3.0 m (Top Model)
1 x	Q-12 2000 mm Electric
2 x	Gracia Maxi ARF, spare wings (Top Model)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Cable video GoPro and 5V cable
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Gracia (Top Model)
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Round Rod 1,25x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	SAVAGE Max Red 1080 mm
1 x	Turbina KINGTECH K260 G5
1 x	T-shape holder metal LAMA
1 x	BETA 1400 ARF Red
1 x	Q-12 X-light 2000 mm Electric
1 x	Spinner 55 mm White (Kavan)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Superlight standard wheel 100 mm (2 pcs)
1 x	Superlight deluxe wheel 45 mm (2 pcs)
1 x	KingTech T-Modul 5 in 1 Telemetry
1 x	Surface Indicator Gauge Small
1 x	Lipo KAVAN 2200 mAh 11.1v 40/80C
1 x	Support Filtro FESTO
1 x	Propeller KAVAN 32x12 2-Bl
1 x	Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)

18,364.80EUR